User Manual for amaran models including: Amaran, Amaran 100d, LED Light
Detailed product manual can be found on www.aputure.com . ... 2. Manual control. Brightness adjustment A. Rotate the INT adjusting knob to adjust the brightness with 1...
Amaran 100d Product Manual
File Info : application/pdf, 2 Pages, 12.01MB
DocumentDocumentAmaran 100d
Product Manual
English
Foreword
Thank you for purchasing "Amaran" series of LED photography lights - Amaran 100d.
Amaran 100d is Amaran series of newly designed high cost performance lamps.Compact structure design, compact and light, excellent texture.Has a high performance level, such as high brightness, high indication, can adjust the brightness, etc.It can be used with the existing Bowens Mount lighting accessories to achieve a variety of lighting effects and enrich product usage patterns.So that the product to meet the needs of different occasions light control, easy to achieve professional level photography.
IMPORTANT SAFETY INSTRUCTIONS
When using this unit, basic safety precautions should always be followed, including the following: 1. Read and understand all instructions before using. 2. Close supervision is necessary when any fixture is used by or
near children. Do not leave the fixture unattended while in use. 3. Care must be taken as burns can occur from touching hot
surfaces. 4. Do not operate the fixture if a cord is damaged, or if the
fixture has been dropped or damaged, until it has been examined by qualified service personnel. 5. Position any power cables such that they will not be tripped over, pulled, or put into contact with hot surfaces. 6. If an extension cord is necessary, a cord with an amperage rating at least equal to that of the fixture should be used. Cords rated for less amperage than the fixture may overheat. 7. Always unplug the lighting fixture from the electrical outlet before cleaning and servicing, or when not in use. Never yank the cord to remove the plug from the outlet.
Detailed product manual can be found on www.aputure.com .
-1-
8. Let the lighting fixture cool completely before storing.
9. To reduce the risk of electric shock, do not immerse this
fixture in water or any other liquids.
10. To reduce the risk of fire or electric shock, do not
disassemble this fixture. Contact cs@aputure.com or take
it to qualified service personnel when service or repair
work is required. Incorrect reassembly may cause electric
shock when the lighting fixture is in use.
11. The use of an accessory attachment not recommended
by the manufacturer may increase the risk of fire, electric
shock, or injury to any persons operating the fixture.
12. Power this fixture by connecting it to a grounded outlet.
13. Please remove the protective cover before powering on
the light.
14. Please remove the protection cover before using the
reflector. 15. Please do not block the ventilation and do
CAUTION
not look at the light directly when it is
powered on.
DO NOT TOUCH LED Light Source Surface
16. Please do not place the LED lighting fixture near any
liquids or other flammable objects.
17. Only use a dry microfiber cloth to clean the product.
18. Please have the product checked by an authorized
service personnel agent if your product has a problem.
19. The malfunctions caused by unauthorized disassembly
are not covered under the warranty.
20. We recommend only using the original Aputure cable
accessories. Please note that our warranty for this
product does not apply to any repairs required due to
any malfunctions of unauthorized Aputure accessories,
although you may request such repairs for a fee.
-2-
21. This product is certified by RoHS, CE, KC, PSE, and FCC. Please operate the product in full compliance with the operation standards. Please note that this warranty does not apply to repairs arising from malfunctions, although you may request such repairs on a chargeable basis.
22. The instructions and information in this manual are based on thorough, controlled company testing procedures. Further notice will not be given if the design or specifications change.
SAVE THESE INSTRUCTIONS
Increase the separation between the equipment and receiver. Connect the equipment to an outlet on a different circuit than the receiver is connected to. Consult the dealer or an experienced radio/TV technician for help.
RF Warning Statement:
This device has been evaluated to meet general RF exposure requirements.
Check list
When you unbox the product, please make sure all the items listed below are included. Otherwise, please contact the seller immediately
FCC Compliance Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try reorient or relocate the receiving antenna.
-3-
Protection Cover (1 pc)
100d Lamp Head (1 pc)
Cable Tie
55° Hyper-Reflector (1 pc)
Steel wire Adapter rope (1 pc) (1 pc)
-4-
Neutrik® powerCON AC Power Cable (1.5m) (1 pc)
Product Details
1. Light
Bowens Mount COB LED
55° Reflector
Locking handle
OLED Display DC-in connector
~~
~~
4. Soft light umbrella installation
Insert the soft light handle into the hole and lock the lock knob on the hole.
Operations
1. Press the power button to turn the light on and off
1
2
5. Adapter mounting
Run the wire rope through the adapter clasp and hang it on the bracket.
The power supply
Powered by AC
AC 100V-240V
2. Manual control
Brightness adjustment A. Rotate the INT adjusting knob to adjust the brightness with 1% variable, and the brightness change range is (0-100) %, and display the change of (0-100) % in real time on the LIGHT body OLED display; B. Click the INT adjustment knob to quickly switch the brightness level: 20%¹40%¹60%¹80% ¹100%¹20%¹40%¹60%¹80%¹ 80%¹ 40%¹60%¹80%¹100% cycle switch.
3. Wireless mode adjustment
The user can connect the light body named Amaran 100d-xxxxxx through the bluetooth of the mobile phone or tablet (Bluetooth serial number). At this time, the light body can be controlled wirelessly through the mobile phone or tablet. When the light effect is controlled by APP, the word "FX" is displayed in the upper left corner of LCD. In wireless mode, 8lighting effects can be controlled through App: paparazzi, fireworks, faulty bulb, lightning, TV, pulse, flash, and Fire. And App can control all kinds of light effect, brightness, frequency.
4. Reset Bluetooth
4.1 Long press the Bluetooth Reset button to reset bluetooth. 4.2 During the Reset process, the LCD displays BT Reset and the Bluetooth icon is flashing, and the percentage shows the current Reset progress (1%-50%-100%).
4.4 If the Bluetooth reset is unsuccessful, the LCD will display [Failure] and disappear after 2 seconds.
4.5 After resetting the light's Bluetooth connection, your mobile phone or tablet will be able to connect to and control the light.
5. OTA mode
Firmware updates can be updated online via the Sidus Link app for OTA updates.
4.3 The LCD will display [Success] 2 seconds after the Bluetooth reset is successful.
6. Using the Sidus Link APP
You can download the Sidus Link app from the iOS App Store or Google Play Store for enhancing the functionality of the light. Please visit sidus.link/app/help for more details regarding how to use the app to control your Aputure lights.
Specifications
Light Operating Current
Light Power Supply
2.7A DC 48V
Adapter Power Supply
AC 100~240V 50/60HZ
TLCI
96
Power Consumption 130W maximum
Cooling Mode CRI
Active Cooling 95
APP Control Type
Bluetooth
Color Temperature
5500K
Remote Ability
100m
Radio Frequency
Sizes (L*W*H)
2.4GHz 207.5x154x164.8mm
Photometrics
CCT 5500K
Distance Illumination
Bare Bulb
1m 400(fc) 4300(lux)
Hyper-Reflector
3670(fc) 39500(lux)
3m 47(fc) 510(lux) 371(fc) 4000(lux)
5m 18(fc) 200(lux) 130(fc) 1400(lux)
* This is an averaged result, the number might be slightly different on each light.
Aputure Imaging Industries Co., Ltd.
Add: F/3, Building 21, Longjun industrial estate, HePing West Road, Shenzhen, Guangdong
E-MAIL: cs@aputure.com Sales Contact: (86)0755-83285569-613
Aputure Imaging Industries Co.,Ltd.
Inspection: Qualified
AddF/3, Building 21, Longjun Industrial Estate, Heping West Road, Shenzhen, Guangdong
Bowens Mount Release Latch
Installations
1. Attaching/detaching the protection cover
Push the handle of the lever in the direction of the arrow shown in the picture, and rotate the cover to pull it out.Reverse rotation will put the protective cover into.
Soft light umbrella hole
Tie Down
* Notice: Always remove the protection cover prior to turning on the light. Always re-install the cover when packing it away.
2. Installation and removal of 55° Reflector
Push the lever handle according to the arrow direction shown in the picture, and rotate the 55° Reflector into it.Rotating in the opposite direction pulls out the 55° Reflector.
INT adjusting knob Bluetooth Reset key
Power switch button
3. Setting up the Light
Adjust the lamp body to the appropriate height, rotate tie-down to fix the lamp body on the tripod, then adjust the lamp body to the required angel, and tighten the lock handle.
-5-
-6-
Serial No. Item Name Purchase Date Buyer Name Buyer Phone Buyer Add Franchiser Seal
Aputure Imaging Industries Co., Ltd. warrants the original consumer purchaser from defects in material and workmanship for a period of one (1) year after the date of purchase. For more details of warranty visit www.aputure.com
* Please press the spring-loaded lock button on the power cord to remove the power cord.
Do not pull it out forcibly.
-7-
-8-
Sidus.link/app/help
-9-
-10-
-11-
-12-
()
190 682.5*280mm 97.5*140mm 70g 519000020000
AP-190-PR-01 V1.0 Ingrid 20201019
Amaran 100d
""LED--Amaran 100d Amaran 100d
1. 2. 3. 4. 5. 6. 7. 8. 9.
www.aputure.com/cn -1-
10.
11.
12.
13.
14.EVA
15.COB
COB
COB
16.
17.
18.
19.
20.
21.RoHS, CE, KC, PSEFCC
22.
FCC : FCC 15 (1) (2) B FCC 15
/
FCC FCC
1.
(1 pc)
(1 pc)
55° (1 pc)
(1 pc)
(1 pc)
(1 pc)
COB
-2-
-3-
-4-
~~
~~
4.
1.
1
2
4.
AC 100V-240V
2.
2.1 a.1%0-100% 0-100% b. 20%40%60%80%100% 20%40%60%80%100%
3. Amaran 100d-xxxxxx APPLCD FX App8 App
4. 4.1 4.2 LCDBT Reset 1%-50%-100%
4.4 LCDFailure2
4.5 5. OTA Sidus Link appOTA
4.3 LCDSuccess2
6. Sidus Link APP
App storesidus link :sidus.link/app/help
TLCI
2.7A
DC 48V AC 100~240V
50/60HZ 96
MAX CRI
App
5500K
xx
2.4GHz 207.5x154x164.8mm
130W
95 100m
CCT 5500K
1m 400(fc) 4300(lux)
3670(fc) 39500(lux)
3m 47(fc) 510(lux) 371(fc) 4000(lux)
*
5m 18(fc) 200(lux) 130(fc) 1400(lux)
*
-7-
-8-
Sidus.link/app/help
Sidus Link App
-9-
-10-
-11-
1.
*
2.
3.
-5-
-6-
()
www.aputure.com
30
213 cs@aputure.com 0755-83285569-613 400-0999-028
-12-
Adobe Illustrator CS6 (Windows) Adobe PDF library 10.01