MAUL Wall-Mounted Plan Holder
Technical Datasheet - Art.-No. 62530
Product Overview
The MAUL wall-mounted plan holder is an aluminum device designed for displaying documents up to DIN A0 size. It offers flexibility with adjustable swivel arms and secure document holding via magnetic clips.
Key Features and Specifications
- Construction: Aluminum tube, silver anodized finish.
- Document Size: Suitable for DIN A0 format, in both landscape and portrait orientations.
- Swivel Arms: Two (2) aluminum swivel arms, silver anodized.
- Arm Adjustability: Height adjustable, freely rotatable, with foldable booms.
- Document Clips: Each arm is equipped with three (3) adjustable magnetic clips for secure document attachment.
- Maximum Load: Capable of holding up to 5 sheets of A0 paper.
- Cover: Made of ABS plastic.
Detailed Dimensions
The following dimensions are provided for the product and its packaging:
| Specification | Value |
|---|---|
| Overall Width (B) | 1400 mm |
| Overall Height (H) | 1080 mm |
| Hole Spacing (Vertical Support) | 1022 ±3 mm |
| Vertical Support Tube Diameter | Ø 58 mm |
| Swivel Arm Diameter | Ø 25 mm |
| Swivel Arm Length (L) | 90 mm |
Product and Packaging Details
| Item | Dimensions (L x B x H) | Weight |
|---|---|---|
| Product | 90 x 1400 x 1080 mm | 1.191 kg |
| Packaging | 1435 x 105 x 110 mm | 1.680 kg |
Diagrammatic Representation Description
The primary diagram illustrates the wall-mounted plan holder in use. It depicts a horizontal bar of 1400 mm width supported by a vertical pole. Two articulated arms extend from the pole to hold a large document labeled "DIN AO". Key dimensions such as overall height (1080 mm) and maximum load capacity (5 sheets A0) are indicated. The arms are described as "2 x Aluminium-Schwenkarm A0" (2 x Aluminum Swivel Arm A0), silver anodized, height adjustable, freely rotatable, with foldable booms and 3 magnetic clips each. The holder is compatible with DIN A0 documents in both landscape and portrait formats.
Additional diagrams detail the vertical support pole, showing its total height, the diameter of the main tube (Ø 58 mm), and the diameter of the arms (Ø 25 mm). The hole spacing for mounting or adjustment is specified as 1022 ±3 mm. The length of the arm extension (L) is 90 mm. A cover component, identified as "Abdeckung - ABS" (Cover - ABS), is also shown.
