MSI USB4 PD100W Expansion Card
Quick Installation Guide
Specifications
| Chipset | Asmedia 4242 USB4 Host Controller |
| External connector |
|
| Interface |
|
| Operating system | PCIe 4.0 x4 (depends on motherboard supportive slot) |
| Form factor | Windows 11 22H2 and later |
| Package contents | 5.2 inch x 4.11 inch (13.2 cm x 10.4 cm) |
Installing the USB4 PD100W card
- Insert the USB4 PD100W card into the PCIe 4.0 x4 slot supported by the PCH.
- Connect JUSB1 and JU4_1 connectors of the USB4 PD100W card to the motherboard. And connect the PCIE_PWR1 to the power supply.
- Use the screw to secure the USB4 PD100W card in the case bay.
NOTE ?
- The DisplayPort signal input by DP1 can only be output via USB1, and input by DP2 can only be output via USB2.
- When using only one DisplayPort input, it is recommended to use DP1 as the priority input.
Diagram illustrating the installation process:
- A PCIe card with labeled ports: PCIE_PWR1, JUSB1, USB1, JU4_1, USB2, DP1, DP2.
- A separate component labeled 'USB' with a red dashed circle around a connector, indicating connection to JUSB1.
- A power connector labeled 'PCIE_PWR1' with a red dashed circle around its connection point.
- A screw labeled '3' being inserted into the PCIe card bracket.
- Connections are shown between the PCIe card and motherboard headers (JUSB1, JU4_1) and a power supply (PCIE_PWR1).
