Dacota Platinum ProX Series X2+ Dual Wireless Optical Mouse

Introduction

This document provides instructions for setting up and using the Dacota Platinum ProX Series X2+ Dual Wireless Optical Mouse. It covers both 2.4GHz and Bluetooth connectivity modes.

Product Overview

The mouse features:

• 2.4GHz indicator
• Bluetooth indicator 1
• Bluetooth indicator 2
• Power button
• Mode switch button
• Forward button
• Backward button
• Scroll wheel
• DPI button
• Low battery indicator
• 2.4GHz Nano receiver

System Requirements

• Microsoft® Windows® XP/2000/Vista™
• Windows® 7/8/10
• Mac OS X 10.8

Specifications

General:

• Engine: Optical
• Mouse resolution: 800/1200/1600/2400 dpi
• Mouse key life: 3 million clicks
• Electric capacity: 500mAh/3.7V
• Mouse size: 124.8*83.76*50.46mm

2.4G Transmission:

• Transmission distance: 10m
• Working voltage: 3.7V
• Working current: 4.0mA
• Return rate: 250Hz

Bluetooth Transmission:

• Transmission distance: 10m
• Working voltage: 3.7V
• Working current: 4.0mA
• Return rate: 125Hz

Low Battery Warning

When the battery indicator flashes red constantly, the mouse needs to be charged.

Setup and Connection

2.4GHz Connection

1. Open the mouse's back cover.
2. Take out the receiver.
3. Insert the receiver into a USB port on your computer.
4. Turn the power button ON.
5. Press the mode button until the white indicator lights up. The connection is successful.

Bluetooth Connection (Windows)

1. Turn the power button ON.
2. Press the mode switch button until the white BT1 indicator lights up.
3. Hold the switch button for 3-5 seconds until the indicator blinks, entering Bluetooth pairing mode.
4. On your computer, click "Bluetooth device" and then "Add or remove Bluetooth devices".
5. Search for "X2+" under Bluetooth and click "Pairing".
6. Once connected, the status will show "X2+ Connected". The Bluetooth function can now be used normally.

Bluetooth Connection (macOS/Macbook)

1. Turn the power button ON.
2. Press the mode switch button until the white BT1 indicator lights up.
3. Hold the switch button for 3-5 seconds until the indicator blinks, entering Bluetooth pairing mode.
4. On your Macbook, click "System Preferences".
5. Click "Bluetooth" in "System Preferences".
6. Search for "X2+" under Bluetooth and click "Pairing".
7. Once connected, the status will show "X2+ Connected". The Bluetooth function can now be used normally.

Mode Switching

If BT1, BT2, and 2.4GHz are connected to different devices, press the mode switch button to select the desired device.

• Bluetooth 1: Device connected
• Bluetooth 2: Device connected
• 2.4GHz: Device connected

Important Notes

WEEE and Battery Disposal:

This symbol on the product or instructions means that the electrical and electronic equipment must be separated from household waste when it is no longer used. There are separate collection systems for recycling in the EU. For more information, contact your local authorities or the retailer where you purchased the product.

Battery Disposal Notes:

The batteries used with this product contain environmentally hazardous chemicals. To protect the environment, dispose of used batteries in accordance with local laws and regulations. Do not dispose of batteries with regular household waste. For more information, contact your local authorities or the retailer where you purchased the product.

Contact Information

Power Norge:

• Website: https://www.power.no/kundeservice/
• Phone: 21 00 40 00

Expert Finland:

• Website: https://www.expert.fi/tuki/asiakaspalvelu/
• Phone: 020 7100 670

Expert Danmark:

• Website: https://www.expert.dk/kundeservice/
• Phone: 70 70 17 07

Power Finland:

• Website: https://www.power.fi/tuki/asiakaspalvelu/
• Phone: 0305 0305

Power Danmark:

• Website: https://www.power.dk/kundeservice/
• Phone: 70 33 80 80

Power Sverige:

• Website: https://www.power.se/kundservice/
• Phone: 08 517 66 000

Power International AS:

• Address: PO Box 523, 1471 Lørenskog, Norway

Punkt 1 Danmark:

• Website: https://www.punkt1.dk/kundeservice/
• Phone: 70 70 17 07