Application
A square in-grade luminaire with patented (US 2016/0327243) BEGA Vortex Optics® to manage visual comfort while maximizing efficacy. Intended as a solution for the illumination of walls, building facades, and architectural features. Designed to bear pressure loads up to 11,000 lbs. from vehicles with pneumatic tires. The luminaire must not be used for traffic lanes where it is subject to horizontal pressure from vehicles braking, accelerating, or changing direction.
Materials
- Clear safety glass
- Marine grade, copper free (≤0.3% copper content) A360.0 aluminum alloy
- BEGA Tricoat ®, a 3-layer finishing technology for increased corrosion protection
- Corrosion-resistant 304 grade stainless steel
- High temperature silicone gasket
- Mechanically captive stainless steel fasteners
- Fully potted waterstopper cable
- Pure anodized aluminum reflector surface
- BEGA Vortex Optics®
NRTL listed to North American Standards, suitable for wet locations
Protection class IP 67
Weight: 11.9 lbs.
Electrical
Operating voltage: 120-277VAC
Minimum start temperature: -30°C
LED module wattage: 16.7 W
System wattage: 20.0W
Controllability: 0-10V, TRIAC, and ELV dimmable
Color rendering index: Ra > 80
Luminaire lumens: 1906 Im
LED service life (L70): 60000 hrs
LED color temperature
- 4000K (K4)
- 3500K (K35)
- 3000K (K3)
- 2700K (K27)
BEGA can supply you with suitable LED replacement modules for up to 20 years after the purchase of LED luminaires - see website for details
Finish
#4 brushed stainless steel. Custom colors are not available.
Available options
- FSC
- Fusing
- NSL
- Non-skid lens
Included (available for pre-shipment)
BB84286 Installation housing
Diagram and Dimensions
The diagram illustrates an in-grade luminaire with a wide beam, showing its installation within a ground surface. It indicates dimensional measurements and component references.
| Model | LED | A | B | C |
|---|---|---|---|---|
| B84283 | 16.7 W | 40° | 7 1/4" | 6 7/8" |
