PSB Speakers ALPHA iQ
Assembly Guide
This guide provides instructions and lists the components required for assembling the PSB Speakers ALPHA iQ AST-25 floor speaker stands.
Items per Stand
| Part | Description | Quantity |
|---|---|---|
| A | Screw [Type A] | x1 |
| B | Screw [Type B] | x1 |
| C | Pin/Dowel | x4 |
| D | Foot/Pad | x4 |
| E | Washer/Spacer | x4 |
Assembly Overview
The assembly involves connecting the speaker stand components. The diagram illustrates an exploded view of the process:
- The top plate, which connects to the speaker, is shown at the top. It attaches to the main vertical pole using component A (Screw).
- The main vertical pole is a long, rectangular section.
- The base plate, which sits on the floor, is shown at the bottom. It attaches to the main vertical pole using component B (Screw).
- Components C (Pins/Dowels) are used for alignment or securing, indicated in the diagram.
- Components D (Feet/Pads) are attached to the underside of the base plate, likely for stability and floor protection.
- Components E (Washers/Spacers) are shown in relation to screws, likely used during the fastening process.
The diagram also shows a completed stand with a speaker mounted on top, demonstrating the final assembly.
