Installation Instructions: VPC-9 Exhaust Vent Cap

This document provides installation instructions for the VPC-9 Exhaust Vent Cap, designed for venting pipes through the roof.

Installation Steps

1. After removing the old vent head, slide the replacement head over the existing collar.
2. Observe the screws on top of the vent. Use this as a pattern to attach the vent to the collar. [Tolerance: 1/2 inch]
3. With the cap adaptor in place, use the provided #8 self-tapping screws [3 screws] to secure the base.

Diagram shows a Vent Pipe Cap installed on a Pipe.

Contact Information

Active Ventilation Products, Inc.

311 First Street, Newburgh, NY 12550-4857

Phone: 800-ROOF VENT (766-3836)

Direct Line: 845-565-7770

Fax: 845-562-8963

Website: roofvents.com

Email: sales@roofvents.com