Panasonic TH-50VX100U High Definition Custom Home Theater Plasma Display Instruction Manual

Instruction Manual for Panasonic models including: TH-50VX100U, TH-65VX100U, TH-50VX100U High Definition Custom Home Theater Plasma Display, High Definition Custom Home Theater Plasma Display, Home Theater Plasma Display, Theater Plasma Display, Plasma Display

PANASONIC TH-65VX100U (01) PDF MANUAL - Manual-Hub.com

File Info : application/pdf, 56 Pages, 1.96MB

PANASONIC TH-65VX100U (01)

Operating Instructions
High Definition Custom Home Theater Plasma Display
Model No. TH-50VX100U TH-65VX100U

English

The illustration shown is an image.
Before connecting, operating or adjusting this product, please read these instructions completely. Please keep this manual for future reference.

https://manual-hub.com/

TQBC2372-1

CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN

WARNING: To reduce the risk of electric shock, do not remove cover or back. No user-serviceable parts inside. Refer servicing to qualified service personnel.

The lightning flash with arrow-head within a triangle is intended to tell the user that parts inside the product are a risk of electric shock to persons.

The exclamation point within a triangle is intended to tell the user that important operating and servicing instructions are in the papers with the appliance.

WARNING : To prevent damage which may result in fire or shock hazard, do not expose this apparatus to rain or moisture. Do not place containers with water (flower vase, cups, cosmetics, etc.) above the set. (including on shelves above, etc.)

WARNING : 1) To prevent electric shock, do not remove cover. No user serviceable parts inside. Refer servicing to qualified service personnel.
2) Do not remove the grounding pin on the power plug. This apparatus is equipped with a three pin grounding-type power plug. This plug will only fit a grounding-type power outlet. This is a safety feature. If you are unable to insert the plug into the outlet, contact an electrician. Do not defeat the purpose of the grounding plug.

This video monitor is designed to display television content from a separate TV tuner. Full-power analog TV broadcasting in the United States will end (as required by law) on February 17, 2009, after which full-power TV broadcasts will be digital only. If this device is used after that date to record or display programming from a product with a TV tuner that relies on a TV antenna, that product would need to contain a digital tuner, or a TV Converter would be necessary to tune the digital signal received with a TV antenna. Analog TVs should continue to work as before for other purposes (e.g., for watching low-power TV stations still broadcasting in analog, watching prerecorded movies, or playing video games). When a Converter is used with an older television receiver or directly with this product, a signal splitter might be necessary to continue to receive low-power analog broadcasts via an antenna. For more information, please see www.DTV.gov or 1-888-CALL-FCC. For information on the TV Converter program, and on government coupons that may be used toward the purchase of one, see www.dtv2009.gov, or call the NTIA at 1-888-DTV-2009. Please check with your cable or satellite service provider if you have questions about your cable or satellite set-top box.

https://manual-hub.com/

Important Safety Instructions
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
11) Only use attachments / accessories specified by the manufacturer.
12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart / apparatus combination to avoid injury from tip-over.
13) Unplug this apparatus during lightning storms or when unused for long periods of time.
14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
15) To prevent electric shock, ensure the grounding pin on the AC cord power plug is securely connected.

https://manual-hub.com/

Dear Panasonic Customer

Welcome to the Panasonic family of customers. We hope that you will have many years of enjoyment from your new Plasma Display. To obtain maximum benefit from your set, please read these Instructions before making any adjustments, and retain them for future reference. Retain your purchase receipt as well, and record the model number and serial number of your set in the space provided on the rear cover of these instructions.

Table of Contents
Important Safety Instructions.................................. 3 FCC STATEMENT...................................................... 5 Safety Precautions ................................................... 6 Maintenance.............................................................. 7 Accessories .............................................................. 8
Accessories Supplied .............................................. 8 Remote Control Batteries ........................................ 8 Connections.............................................................. 9 PC Input Terminals connection.............................. 10 SERIAL Terminals connection ................................11 HDMI connection................................................... 12 COMPONENT / RGB connection .......................... 12 Power ON / OFF ..................................................... 13 Initial selections...................................................... 14 Selecting the input signal ...................................... 14 Selecting the On-Screen Menu Language ............ 14 Basic Controls ........................................................ 15 SCROLLING BAR and TEST PATTERNS functions ..... 17 EXT. SCALER function.......................................... 17 ASPECT Controls ................................................... 18 On-Screen Menu Displays ..................................... 19 PICTURE Adjustments ........................................... 21 ADVANCED SETTINGS........................................ 23 Picture Profiles ....................................................... 25 Saving profiles....................................................... 26 Loading profiles ..................................................... 27 Editing profiles....................................................... 28 Locking profiles ..................................................... 29

Adjusting POS. /SIZE ............................................. 31 SOUND Adjustment................................................ 33
SDI SOUND OUTPUT........................................... 33 SCREENSAVER (For preventing image retention) .. 34
Reduces screen image retention........................... 35 SIDE BAR ADJUST............................................... 35 Specifying the scaler.............................................. 36 Reduces power consumption ............................... 37 Customizing the On-Screen Menu Display .......... 38 SET UP for Input Signals ....................................... 39 COMPONENT / RGB IN SELECT......................... 39 YUV / RGB IN SELECT......................................... 39 SIGNAL menu ....................................................... 40 XGA MODE ........................................................... 40 REFRESH RATE ................................................... 40 SYNC .................................................................... 41 SDI THROUGH ..................................................... 41 Input signal display................................................ 41 OPTIONS Adjustments........................................... 42 Watching Videos and DVDs................................... 43 Programming the Remote to Operate Peripheral Equipment ............................................................. 44 Troubleshooting ..................................................... 45 List of Aspect Modes ............................................. 46 Remote Control Operation / Code List ................. 47 Applicable Input Signals........................................ 50 Specifications ......................................................... 52 Panasonic Professional Flat Panel Display Limited Warranty .. 53 LIMITED WARRANTY STATEMENT ....................... 54 Customer Service ................................................... 55

https://manual-hub.com/

FCC STATEMENT

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
· Reorient or relocate the receiving antenna. · Increase the separation between the equipment and receiver. · Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. · Consult the dealer or an experienced technician for help.
This device complies with Part15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC CAUTION: To assure continued compliance, follow the attached installation instructions and use only shielded interface cables when connecting to computer or peripheral devices. Any changes or modifications not expressly approved by Panasonic Corp. of North America could void the user's authority to operate this device.
FCC Declaration of Conformity
Model No. TH-50VX100U, TH-65VX100U

Responsible Party: Contact Source:

Panasonic Corporation of North America One Panasonic Way 1F-10, Secaucus, NJ 07094 Panasonic Professional Display Company Panasonic Plasma Concierge 1-800-973-4390

CANADIAN NOTICE: This Class B digital apparatus complies with Canadian ICES-003.
Note: Do not allow a still picture to be displayed for an extended period, as this can cause a permanent image retention to remain on the Plasma Display. Examples of still pictures include logos, video games, computer images, teletext and images displayed in 4:3 mode.
Trademark Credits · VGA is a trademark of International Business Machines Corporation. · Macintosh is a registered trademark of Apple Computer, USA. · SVGA, XGA, SXGA and UXGA are registered trademarks of the Video Electronics Standard Association.
Even if no special notation has been made of company or product trademarks, these trademarks have been fully respected. · HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.

https://manual-hub.com/

Safety Precautions

CAUTION
This Plasma Display is for use only with the following optional accessories. Use with any other type of optional accessories may cause instability which could result in the possibility of injury.
(All of the following accessories are manufactured by Panasonic Corporation.)
· Pedestal ................................................................................TY-ST50VX100 (for TH-50VX100U), TY-ST65VX100 (for TH-65VX100U)
· Wall-hanging bracket (vertical)..............................................TY-WK42PV7 (for TH-50VX100U), TY-WK65PV7 (for TH-65VX100U)
· Wall-hanging bracket (angled) ..............................................TY-WK42PR7 (for TH-50VX100U), TY-WK65PR8 (for TH-65VX100U)
· BNC Component Video Terminal Board ...............................TY-42TM6A · RCA Component Video Terminal Board................................TY-42TM6Z · HD-SDI Terminal Board ........................................................TY-FB9HD · HD-SDI Terminal Board with audio .......................................TY-FB10HD · Dual Link HD-SDI Terminal Board ........................................TY-FB11DHD · Dual HDMI Terminal Board ...................................................TY-FB10HMD · DVI-D Terminal Board ...........................................................TY-FB11DD · Ir Through Terminal Board ....................................................TY-FB9RT
Always be sure to ask a qualified technician to carry out set-up.
Small parts can present choking hazard if accidentally swallowed. Keep small parts away from young children. Discard unneeded small parts and other objects, including packaging materials and plastic bags/sheets to prevent them from being played with by young children, creating the potential risk of suffocation.

When using the Plasma Display
Do not bring your hands, face or objects close to the ventilation holes of the Plasma Display. · Top of the Plasma Display is usually very hot due to the
high temperature of exhaust air being released through the ventilation holes. Burns or personal injuries can happen if any body parts are brought too close. Placing any object near the top of the display could also result in heat damages to the object as well as to the Display if its ventilation holes are blocked.
Be sure to disconnect all cables before moving the Plasma Display.
· Moving the Display with its cables attached might damage the cables which, in turn, can cause fire or electric shock.
Disconnect the power plug from the wall outlet as a safety precaution before carrying out any cleaning.
· Electric shocks can result if this is not done.

Clean the power cable regularly to prevent it from becoming dusty.
· Built-up dust on the power cord plug can increase humidity which might damage the insulation and cause fire. Unplug the cord from the wall outlet and clean it with a dry cloth.
This Plasma Display radiates infrared rays, therefore it may affect other infrared communication equipment. Install your infrared sensor in a place away from direct or reflected light from your Plasma Display.
Note: Do not allow a still picture to be displayed for an extended period, as this can cause a permanent image retention to remain on the Plasma Display. Examples of still pictures include logos, video games, computer images, teletext and images displayed in 4:3 mode.

https://manual-hub.com/

Safety Precautions / Maintenance

WARNING
Setup
Do not place the Plasma Display on sloped or unstable surfaces.
· The Plasma Display may fall off or tip over.
Do not place any objects on top of the Plasma Display.
· If water spills onto the Plasma Display or foreign objects get inside it, a short-circuit may occur which could result in fire or electric shock. If any foreign objects get inside the Plasma Display, please consult an Authorized Service Center.
Do not cover the ventilation holes. · Doing so may cause the Plasma Display to overheat, which can cause fire or damage to the Plasma Display.
Transport only in upright position! · Transporting the unit with its display panel facing upright or downward may cause damage to the internal circuitry.
If using the pedestal (optional accessory), leave a space of 3 15/16" (10 cm) or more at the top, left and right, and 2 3/4" (7 cm) or more at the rear, and also keep the space between the bottom of the display and the floor surface. If using some other setting-up method, follow the manual of it. (If there is no specific indication of installation dimension in the installation manual, leave a space of 3 15/16" (10 cm) or more at the top, bottom, left and right, and 2 3/4" (7 cm) or more at the rear.)
An apparatus with CLASS I construction shall be connected to a mains socket outlet with a protective earthing connection.
AC Power Supply Cord
The Plasma Display is designed to operate on 110 - 127 V AC, 50/60 Hz.

Do not use any power supply cord other than that provided with this unit.
· Doing so may cause fire or electric shocks.
Securely insert the power cord plug as far as it will go. · If the plug is not fully inserted, heat may be generated which could cause fire. If the plug is damaged or the wall socket plate is loose, they should not be used.
Do not handle the power cord plug with wet hands. · Doing so may cause electric shocks.
Do not do anything that might damage the power cable. When disconnecting the power cable, hold the plug, not the cable.
· Do not make any modifications, place heavy objects on, place near hot objects, heat, bend, twist or forcefully pull the power cable. Doing so may cause damage to the power cable which can cause fire or electric shock. If damage to the cable is suspected, have it repaired at an Authorized Service Center.
If the Plasma Display will not be used for a long period of time, unplug the power cord from the wall outlet.
If problems occur during use
If a problem occurs (such as no picture or no sound), or if smoke or an abnormal odor is detected from the Plasma Display, unplug the power cord immediately.
· Continuous use of the Display under these conditions might cause fire or permanent damage to the unit. Have the Display evaluated at an Authorized Service Center. Services to the Display by any unauthorized personnel are strongly discouraged due to its high voltage dangerous nature.
If water or foreign objects get inside the Plasma Display, if the Plasma Display is dropped, or if the cabinet becomes damaged, disconnect the power cord plug immediately.
· A short may occur, which could cause fire. Contact an Authorized Service Center for any repairs that need to be made.

Maintenance

The front of the display panel has been specially treated. Wipe the panel surface gently using only a cleaning cloth or a soft, lint-free cloth.
· If the surface is particularly dirty, wipe with a soft, lint-free cloth which has been soaked in pure water or water in which neutral detergent has been diluted 100 times, and then wipe it evenly with a dry cloth of the same type until the surface is dry.
· Do not scratch or hit the surface of the panel with fingernails or other hard objects, otherwise the surface may become damaged. Furthermore, avoid contact with volatile substances such as insect sprays, solvents and thinner, otherwise the quality of the surface may be adversely affected.
If the cabinet becomes dirty, wipe it with a soft, dry cloth. · If the cabinet is particularly dirty, soak the cloth in water to which a small amount of neutral detergent has been added and then wring the cloth dry. Use this cloth to wipe the cabinet, and then wipe it dry with a dry cloth. · Do not allow any detergent to come into direct contact with the surface of the Plasma Display. If water droplets get inside the unit, operating problems may result. · Avoid contact with volatile substances such as insect sprays, solvents and thinner, otherwise the quality of the cabinet surface may be adversely affected or the coating may peel off. Furthermore, do not leave it for long periods in contact with articles made from rubber or PVC.
7
https://manual-hub.com/

Accessories

Accessories Supplied

Check that you have the Accessories and items shown

Operating Instruction book

Remote Control Transmitter N2QAYB000323

POS. /SIZE PICTURE DISPLAY
FUNCTION

COMPO.

HDMI

CH INPUT

VIDEO MENU

EXT.SCALER

OFF TIMER

MEM. LOAD

Fixing band × 1

DISPLAY
AC cord

Batteries for the Remote Control Transmitter (2 × AA Size)

Remote Control Batteries

Requires two AA batteries. 1. Pull and hold the hook, then open the battery cover.

2. Insert batteries - note correct polarity ( + and -).

Open

Hook

"AA" size

Helpful Hint:
For frequent remote control users, replace old batteries with Alkaline batteries for longer life.

Precaution on battery use
Incorrect installation can cause battery leakage and corrosion that will damage the remote control transmitter. Disposal of batteries should be in an environment-friendly manner. Observe the following precautions: 1. Batteries should always be replaced as a pair. Always use new batteries when replacing the old set. 2. Do not combine a used battery with a new one. 3. Do not mix battery types (example: "Zinc Carbon" with "Alkaline"). 4. Do not attempt to charge, short-circuit, disassemble, heat or burn used batteries. 5. Battery replacement is necessary when the remote control acts sporadically or stops operating the Plasma Display. 6. Do not burn or breakup batteries.
Batteries must not be exposed to excessive heat such as sunshine, fire or the like. 7. Make a note of the remote control codes before changing batteries in case the codes are reset. (see page 44)

https://manual-hub.com/

Connections
When connecting the speakers, be sure to use only the optional accessory speakers. Refer to the speaker's Installation Manual for details on speaker installation.
1

Speaker

terminal (L)

Speaker terminal (R)

AC cord connection (see page 13)

AC cord fixing

2
Note: Make sure that the AC cord is locked on both the left and right sides.

1 Plug the AC cord into the display unit. Plug the AC cord until it clicks.
2 Fix the AC cord with the clamper which is attached to the unit.

Unplug the AC cord

Push until the hook clicks.

Unplug the AC cord pressing the two knobs.

Open

2. Pull off.
1. Keep the knob pressed.

Note: When disconnecting the AC cord, be absolutely sure to disconnect the AC cord plug at the socket outlet first.

Cable fixing band Secure any excess cables with band as required. Note: One fixing band is supplied with this unit. In case of securing cables at two positions, please purchase it separately.

Pass the attached cable fixing band through the clip as shown in the figure.

To secure cables connected to Terminals, wrap the cable fixing band around them then pass the pointed end through the locking block, as shown in the figure. While ensuring there is sufficient slack in cables to minimize stress (especially in the power cord), firmly bind all cables with the supplied fixing band.

To tighten:

To loosen: Push the catch

Pull

SLOT1

SLOT2

R AUDIO L PR/CR/R PB/CB/B Y/G
COMPONENT/RGB IN
SLOT3

AUDIO
PC IN

SERIAL

Dual HDMI Terminals (equivalent of Dual HDMI Terminal Board (TY-FB10HMD)) (see page 12)

COMPONENT/RGB IN and Audio IN Terminals (equivalent of RCA Component Video Terminal Board (TY-42TM6Z)) (see page 12)

From EXTERNAL monitor terminal on Computer (see page 10)

From SERIAL Terminal on Computer (see page 11)

Note: At factory shipment, Terminal boards are installed in SLOT 1, SLOT 2 and SLOT 3.

https://manual-hub.com/

Connections
PC Input Terminals connection
COMPUTER

(Female)
AUDIO
PC IN

Conversion adapter (if necessary)

RGB PC cable

Mini D-sub 15p (Male)

Audio

Stereo plug

Connect a cable which matches the audio output terminal on the computer.

Notes: · Due to space limitations, occasionally you may have trouble connecting Mini D-sub 15P cable with ferrite core to PC
input Terminal. · With regard to the typical PC input signals that are described in the applicable input signals list (see page 50),
adjustment values such as for the standard picture positions and sizes have already been stored in this unit. You can add up to eight PC input signal types that are not included in the list. · Computer signals which can be input are those with a horizontal scanning frequency of 15 to 110 kHz and vertical scanning frequency of 48 to 120 Hz. (However, the image will not be displayed properly if the signals exceed 1,200 lines.) · The display resolution is a maximum of 1,440 × 1,080 dots when the aspect mode is set to "4:3", and 1,920 × 1,080 dots when the aspect mode is set to "FULL". If the display resolution exceeds these maximums, it may not be possible to show fine detail with sufficient clarity. · The PC input terminals are DDC2B-compatible. If the computer being connected is not DDC2B-compatible, you will need to make setting changes to the computer at the time of connection. · Some PC models cannot be connected to the set. · There is no need to use an adapter for computers with DOS/V compatible Mini D-sub 15P terminal. · The computer shown in the illustration is for example purposes only. · Additional equipment and cables shown are not supplied with this set. · Do not set the horizontal and vertical scanning frequencies for PC signals which are above or below the specified frequency range. · Component Input is possible with the pin 1, 2, 3 of the Mini D-sub 15P Connector. · Change the "COMPONENT/RGB-IN SELECT" setting in the "SET UP" menu to "COMPONENT" (when COMPONENT signal connection) or "RGB" (when RGB signal connection). (see page 39)

Signal Names for Mini D-sub 15P Connector

54 321 10 9 8 7 6
15 14 13 12 11
Pin Layout for PC Input Terminal

Pin No.
1 2 3 4 5

Signal Name R (PR/CR) G (Y) B (PB/CB)
NC (not connected) GND (Ground)

Pin No.
6 7 8 9 10

Signal Name GND (Ground) GND (Ground) GND (Ground)
+5 V DC GND (Ground)

Pin No.
11 12 13 14 15

Signal Name NC (not connected)
SDA HD/SYNC
VD SCL

https://manual-hub.com/

SERIAL Terminals connection

Connections

The SERIAL terminal is used when the Plasma Display is controlled by a computer.

COMPUTER

(Male)

12345 6789

RS-232C Straight cable (Female)

SERIAL

Pin layout for SERIAL Terminal

D-sub 9p
Notes: · Use the RS-232C straight cable to connect the computer
to the Plasma Display. · The computer shown is for example purposes only. · Additional equipment and cables shown are not supplied
with this set.
The SERIAL terminal conforms to the RS-232C interface specification, so that the Plasma Display can be controlled by a computer which is connected to this terminal. The computer will require software which allows the sending and receiving of control data which satisfies the conditions given below. Use a computer application such as programming language software. Refer to the documentation for the computer application for details.

Communication parameters

Signal level Synchronization method
Baud rate Parity
Character length Stop bit
Flow control

RS-232C compliant Asynchronous 9600 bps None 8 bits 1 bit -

Basic format for control data The transmission of control data from the computer starts with a STX signal, followed by the command, the parameters, and lastly an ETX signal in that order. If there are no parameters, then the parameter signal does not need to be sent.

STX C1 C2 C3 : P1 P2 P3 P4 P5 ETX

Start (02h)

Colon Parameter(s)

3-character

(1 - 5 bytes)

command (3 bytes)

End (03h)

Notes: · If multiple commands are transmitted, be sure to wait for
the response for the first command to come from this unit before sending the next command. · If an incorrect command is sent by mistake, this unit will send an "ER401" command back to the computer. · SL1A, SL1B, SL2A and SL2B of Command IMS are available only when a dual input terminal board is attached.

Signal names for D-sub 9P connector

Pin No.

Details

R X D

T X D

GND

4 · 6 7
8

Non use (Shorted in this set)

1 · 9

These signal names are those of computer specifications.

Command

Command PON POF AVL IMS

Parameter
None
None
**
None SL1 SL2 SL3 PC1 SL1A SL1B SL2A SL2B

Control details
Power ON
Power OFF
Volume 00 - 63
Input select (toggle) Slot1 input Slot2 input Slot3 input PC input Slot1 input (INPUT1A) Slot1 input (INPUT1B) Slot2 input (INPUT2A) Slot2 input (INPUT2B)

DAM

None

Screen mode select (toggle)

ZOOM

FULL

JUST

NORM

4:3

SJST

JUST

SNOM

4:3

SFUL

H-FILL

With the power off, this display responds to PON

command only.

https://manual-hub.com/

Connections
HDMI connection

This unit has terminal boards equivalent to Dual HDMI Terminal Board (TY-FB10HMD) and RCA Component Video Terminal Board (TY-42TM6Z) as standard equipment.

[Pin assignments and signal names]

Pin No.

Signal

1 T.M.D.S Data2+

T.M.D.S Data2 Shield

3 T.M.D.S Data2-

4 T.M.D.S Data1+

T.M.D.S Data1 Shield

6 T.M.D.S Data1-

7 T.M.D.S Data0+

T.M.D.S Data0 Shield

9 T.M.D.S Data0-

10 T.M.D.S Clock+

Pin No.

Signal

T.M.D.S Clock Shield

12 T.M.D.S Clock-

13 CEC

Reserved (N.C. on device)

15 SCL

16 SDA

DDC/CEC Ground

18 +5V Power

19 Hot Plug Detect

SLOT1

SLOT2

R AUDIO L PR/CR/R PB/CB/B Y/G
COMPONENT/RGB IN
SLOT3

PC I

HDMI cables

Note: Additional equipment and HDMI cables shown are not supplied with this set.

HDMI AV OUT

DVD Player or SET-TOP-BOX (HDMI compatible machines only)

COMPONENT / RGB connection

COMPONENT VIDEO OUT

Example of input signal source

DVD

Y, PB, PR, PB
OUT Y

Digital TV-SET-TOP-BOX (DTV-STB)

AUDIO OUT

Computer

RGB Camcorder or

R AUDIO L PR/CR/R PB/CB/B Y/G
COMPONENT/RGB IN
SLOT3

Notes: · Change the "COMPONENT/RGB-IN SELECT" setting in the "SET UP" menu to "COMPONENT"
(when COMPONENT signal connection) or "RGB" (when RGB signal connection). (see page 39) · Additional equipment, cables and adapter plugs shown are not supplied with this set. · SYNC ON G signal is needed. (see page 41)
12

https://manual-hub.com/

Power ON / OFF
Connecting the AC cord plug to the Plasma Display. Fix the AC cord plug securely to the Plasma Display with the clamper. (see page 9)

Connecting the plug to the Wall Outlet.
Note: When disconnecting the AC cord, be absolutely sure to disconnect the AC cord plug at the socket outlet first.
Press the Power switch on the Plasma Display to turn the set on: Power-On.
Power Indicator: Green

INPUT

Power

Remote Control

Indicator Sensor

INPUT

When first switching on the unit
Following screen will be displayed when the unit is turned on for the first time. Select the language with the remote control. Unit buttons are invalid.
1 Select the language.
2 Set.

OSD LANGUAGE
English (UK) Deutsch Français Italiano Español
ENGLISH (US)

From the second time on, the below screen is displayed for a while (setting condition is an example).
PC
FULL

Notes: · Once the language is set, this screen won't be displayed when switching on the unit next time. · After the setting, language selection can be done from the SET UP menu. (see page 14)

Press the button on the remote control to turn the Plasma Display off. Power Indicator: Red (standby)

Press the button on the remote control to turn the Plasma Display on.

Power Indicator: Green
HDMI

Turn the power to the Plasma Display off by pressing the Plasma Display is on or in standby mode.

switch on the unit, when the

Note: During operation of the power management function, the power indicator turns orange in the power off state.

https://manual-hub.com/

Initial selections

Selecting the input signal

Select the input signals to be connected by installing the optional Terminal Boards.

INPUT
INPUT HDMI1 HDMI2 HDMI3 HDMI4 COMPONENT PC

Press to select the input signal to be played back from the equipment which has been connected to the Plasma Display.
HDMI signal terminal in SLOT1 HDMI signal terminal in SLOT2 COMPONENT or RGB signal terminal in SLOT3 PC signal terminal in PC IN

Using dedicated buttons for input selection Press to select HDMI signal terminals 14 in SLOT 1 and 2.

Press to select component or RGB signal terminal in SLOT 3.

Press to select PC signal terminal in PC IN.
Notes: · Selecting is also possible by pressing the INPUT button on the unit. · Input terminal will not be selected if the terminal board is not installed into the SLOT. · Select to match the signals from the source connected to the component/RGB input
terminals. (see page 39) · Image retention (image lag) may occur on the plasma display panel when a still
picture is kept on the panel for an extended period. The function that darkens the screen slightly is activated to prevent image retention (see page 45), but this function is not the perfect solution to image retention.

Selecting the On-Screen Menu Language

COMPO.

HDMI

CH INPUT

DISPLAY

INPUT

ENTER/

INPUT

ENTER/

Press to display the menu screen. Press to select "SET UP".
Press to display the SET UP menu.

PICTURE SET UP POS. /SIZE SOUND

HDMI

Press to select OSD LANGUAGE. Press to select your preferred language.

Selectable languages English(UK) Deutsch Français Italiano Español ENGLISH(US)
(Japanese) (Russian)

SET UP menu

SIGNAL

SCREENSAVER

COMPONENT/RGB-IN SELECT

RGB

EXTERNAL SCALER MODE

OFF

POWER SAVE

OFF

OSD POSITION

UPPER LEFT

OSD LANGUAGE

ENGLISH (US)

https://manual-hub.com/

Basic Controls

Main Unit

INPUT button (INPUT1, INPUT2, INPUT3 and PC selection) (see page 14)

When the menu screen is displayed:
"": press to move the cursor up "": press to move the cursor
down (see page 19)

INPUT

ENTER/

Remote control sensor
Enter / Aspect button (see page 18, 19)

Main Power On / Off Switch
MENU Screen ON / OFF Each time the MENU button is pressed, the menu screen will switch. (see page 19)

Power Indicator The Power Indicator will light. · Power-OFF ... Indicator not illuminated (The unit
will still consume some power as long as the power cord is still inserted into the wall outlet.) · Standby ........ Red · Power-ON ..... Green · DPMS............ Orange (With PC input signal and during operation of PC's screensaver.)

https://manual-hub.com/

Basic Controls

Remote Control Transmitter
POS. /SIZE button (see page 31)
Standby (ON / OFF) button The Plasma Display must first be plugged into the wall outlet and turned on at the power switch (see page 13). Press this button to turn the Plasma Display On, from Standby mode. Press it again to turn the Plasma Display Off to Standby mode.
FUNCTION button (see page 17)
OK button Press to make selections.
POSITION buttons

PC button Press to select PC input. (see page 14)

DIRECT INPUT buttons Press the each button to select the INPUT mode. (see page 14) This button is used to switch directly to INPUT mode.

INPUT button (see page 14)

VIDEO MENU button Press to select PICTURE MENU. (see page 21)

STANDARD

DYNAMIC

MONITOR

CINEMA

EXT.SCALER button (see page 17)

ASPECT button Press to adjust the aspect. (see page 18)
Numeric buttons (see page 27)

MEM. LOAD button (see page 27)
External equipment operations (see page 43)

POS. /SIZE PICTURE DISPLAY
FUNCTION

COMPO.

HDMI

CH INPUT

VIDEO MENU

EXT.SCALER

OFF TIMER

MEM. LOAD

DISPLAY

PICTURE button (see page 21)
LIGHT button Lights the INPUT and VIDEO MENU buttons for 5 seconds. Makes the selected remote control mode key (DISPLAY, VCR, DBS/CBL or DVD) flash three times. Press again to turn off the INPUT and VIDEO MENU button lights.
Equipment (Remote control mode) selection buttons (see page 43, 44)
MENU button Displays menu screen. (see page 19)
RETURN button (see page 19) Press the RETURN button to return to previous menu screen.
COMPO. button Press to select COMPONENT or RGB input. (see page 14)

OFF TIMER button The Plasma Display can be preset to switch to stand-by after a fixed period. The setting changes to 30 minutes, 60 minutes, 90 minutes and 0 minutes (off timer cancelled) each time the button is pressed.

0
When three minutes remain, "OFF TIMER 3" will flash. The off timer is cancelled if a power interruption occurs.

RECALL button Press to display the current system status. 1 Input label 2 Aspect mode (see page 18) 3 Off timer
The off timer indicator is displayed only when the off timer has been set.

4:3
2

OFF TIMER 90

https://manual-hub.com/

Basic Controls
SCROLLING BAR and TEST PATTERNS functions

Pressing

activates one of the following two functions. The function button setting can be configured by accessing

"Function button assign" in the OPTIONS menu. (see page 42)

SCROLLING BAR

TEST PATTERNS

Press

SCROLLING BAR

YES

N O

Press to select "YES".
Press.

Activates the SCROLLING BAR ONLY screensaver. After 15 minutes, the display enters standby mode.
SCROLLING BAR ONLY

Press

TEST PATTERNS

YES

N O

Press to select "YES".
Press.

Each time you press , a different test pattern is displayed (seven in all).

Color Bars

Red

Green

Black

Frame 1% window (2 lines × 2 dots)

Blue

To exit this mode, press any button.

To exit this mode, press any button other than .

Note: AUTO POWER OFF is deactivated during SCROLLING BAR or TEST PATTERNS operation. (see page 37)

EXT. SCALER function

Each time you press

, an external scaler is activated or deactivated.

EXTERNAL SCALER MODE ON
OFF: Use the built-in scaler. ON: Use an external scaler.
The setting is valid with the following signals. 1125 (1080) / 24p · 25p · 30p · 50p · 60p With input signals other than these, specifying "ON" will display the following message.
Input signal must be 1125p(1080p) EXTERNAL SCALER MODE ON
Note: You can also turn the built-in scaler ON and OFF by accessing "EXTERNAL SCALER MODE" in the SET UP menu. (see page 36)
17
https://manual-hub.com/

ASPECT Controls

The Plasma Display will allow you to enjoy viewing the picture at its maximum size, including wide screen cinema format picture.
Note: Be aware that if you put the display in a public place for commercial purposes or a public showing and then use the aspect mode select function to shrink or expand the picture, you may be violating the copyright under copyright law. It is prohibited to show or alter the copyrighted materials of other people for commercial purposes without the prior permission of the copyright holder.

Press repeatedly to move through the aspect options:

For details about the aspect mode, please see "List of Aspect Modes" (page 46).

HDMI

[from the unit]

INPUT

ENTER/

The aspect mode changes each time the ENTER button is pressed.

For PC signal input:

4:3

ZOOM

FULL

For SD signal input (525 (480) / 60i · 60p, 625 (575) / 50i · 50p):

4:3

ZOOM FULL

JUST

For HD signal input [1125 (1080) / 60i · 50i · 60p · 50p · 24p · 25p · 30p · 24sF, 1250 (1080) / 50i, 750 (720) / 60p · 50p]:

4:3 H-FILL

ZOOM FULL JUST

Notes: · The aspect mode is memorized separately for each input terminal. · Do not allow the picture to be displayed in 4:3 mode for an extended period, as this can cause a permanent image
retention to remain on the Plasma Display Panel.

All Aspect mode Set "All Aspect" to "On" in OPTION menu to enable the extended aspect mode (page 42). When All Aspect mode, the aspect mode of pictures is switched as follows. For details about the aspect mode, please see "List of Aspect Modes" (page 46).
For PC signal input: 4:3 Zoom 16:9

For SD signal input (525 (480) / 60i · 60p, 625 (575) / 50i · 50p): 4:3 Zoom1 Zoom2 Zoom3 16:9 14:9 Just

For HD signal input [1125 (1080) / 60i · 50i · 60p · 50p · 24p · 25p · 30p · 24sF, 1250 (1080) / 50i, 750 (720) / 60p · 50p]: 4:3 Full Zoom1 Zoom2 Zoom3 16:9 14:9 Just1 Just2 4:3 (1) 4:3 (2)

https://manual-hub.com/

On-Screen Menu Displays

Various menus allow you to make settings for the picture, sound, and other functions so that you can enjoy watching Display best suited for you.

POS. /SIZE PICTURE
HDMI
DISPLAY
Press to return to the previous menu.

1 Display the menu screen.

PICTURE SET UP POS. /SIZE SOUND
OPTIONS

NORMAL IZE PICTURE MENU PICTURE BRIGHTNESS SHARPNESS COLOR TEMP COLOR MANAGEMENT
ADVANCED SETTINGS

STANDARD 25 0 5
NORMAL

MEMORY SAVE MEMORY LOAD MEMORY EDIT

2 Select the menu.
PICTURE SET UP POS. /SIZE SOUND
OPTIONS

Remote Control
press

Unit

press several

times

Each time the MENU button is pressed, the menu screen will switch.

Normal Viewing PICTURE SET UP POS. /SIZE SOUND

1 select 2 press

(Example: SOUND menu)
Menus can also be accessed directly by pressing dedicated buttons, such as (see page 21, 31)

3 Select the item.

NORMAL IZE AUDIO MENU BASS MID TREBLE BALANCE SURROUND VOLUME

STANDARD 0 0 0 0
OFF 1

select

(Example: SOUND menu)

4 Set.

set

and .

ENTER/

select press

ENTER/

set press

5 Exit the menu.

press

press several

times

https://manual-hub.com/

On-Screen Menu Displays
Overview
Note: Menu that cannot be adjusted is grayout. Adjustable menu changes depending on signal, input and menu setting.

PICTURE SET UP POS. /SIZE SOUND
OPTIONS

NORMAL IZE PICTURE MENU PICTURE BRIGHTNESS COLOR TINT SHARPNESS COLOR TEMP COLOR MANAGEMENT
ADVANCED SETTINGS

STANDARD 25 0 6 0 5
NORMAL OFF

MEMORY SAVE MEMORY LOAD MEMORY EDIT
see page 21-30

SIGNAL

SCREENSAVER

COMPONENT/RGB-IN SELECT

RGB

EXTERNAL SCALER MODE

OFF

POWER SAVE

OFF

STANDBY SAVE

POWER MANAGEMENT

OFF

AUTO POWER OFF

OFF

OSD DESIGN

TYPE1

OSD POSITION OSD LANGUAGE

UPPER LEFT ENGLISH (US)

see page 31-41

NORMAL IZE AUTO SETUP
H-POS H-SIZE V-POS V-SIZE DOT CLOCK CLOCK PHASE 1:1 PIXEL MODE DISPLAY SIZE

0 0 0 0 0 -16
OFF OFF

see page 31, 32

NORMAL IZE AUDIO MENU BASS MID TREBLE BALANCE SURROUND VOLUME

STANDARD 0 0 0 0
OFF 1
see page 33

Onscreen display All Aspect Studio mode Function button assign
Memory lock

On Off Off Scrolling bar

see page 42

ADVANCED SETTINGS NORMAL IZE
BLACK EXTENSION INPUT LEVEL GAMMA AGC W/B HIGH R W/B HIGH G W/B HIGH B W/B LOW R W/B LOW G W/B LOW B 3:2 PULLDOWN STUDIO GAIN NOISE REDUCTION

0 0
2.2 OFF 0 0 0 0 0 0 OFF OFF OFF

see page 23, 24

SIGNAL XGA MODE REFRESH RATE

[ COMPONENT ] 1024 ×768 100 Hz

see page 40, 41

SCREENSAVER START
FUNCTION SIDE BAR ADJUST WOBBLING PEAK LIMIT

NEGATIVE IMAGE BRIGHT OFF OFF

see page 34, 35

SDI SOUND OUTPUT LEFT CHANNEL RIGHT CHANNEL SOUND OUT LEVEL METER

2/2 CHANNEL 1 CHANNEL 2
ON OFF

see page 33

https://manual-hub.com/

PICTURE Adjustments

1 Display the menu screen.
2 Select "PICTURE".
PICTURE SET UP POS. /SIZE SOUND

3 Select the item and set.

NORMAL IZE

PICTURE MENU

STANDARD

PICTURE

BRIGHTNESS

SHARPNESS

COLOR TEMP

NORMAL

COLOR MANAGEMENT

OFF

ADVANCED SETTINGS

4 Exit the menu.

2 OK 1 select
2 adjust or select 1 select
or

During "RGB" and "PC" input signal.

NORMAL IZE PICTURE MENU PICTURE BRIGHTNESS SHARPNESS COLOR TEMP COLOR MANAGEMENT
ADVANCED SETTINGS

STANDARD 25 0 5
NORMAL OFF

During "Digital" and "COMPONENT" input signal.

NORMAL IZE PICTURE MENU PICTURE BRIGHTNESS COLOR TINT SHARPNESS COLOR TEMP COLOR MANAGEMENT
ADVANCED SETTINGS

STANDARD 25 0 6 0 5
NORMAL OFF

Using

for menu display

To display a menu for adjustment of the PICTURE menu on the bottom of the screen, press

PICTURE

2 adjust or select

1 select

To display a menu for ADVANCED SETTINGS adjustment, press

again.

BLACK EXTENSION

To hide the menu, press

PICTURE MENU

You can switch to the optimal picture mode for the video source and viewing environment.

STANDARD MONITOR

DYNAMIC CINEMA

STANDARD:

CINEMA:

For viewing in standard (evening lighting) environments. Ideal for movies.

This menu selects the normal levels of BRIGHTNESS

MONITOR:

and PICTURE.

For use when creating broadcast or movie content. With

DYNAMIC:

this picture, even if the overall average picture level

For viewing in brighter environments. This menu

(APL) changes, the brightness of areas with the same

selects higher than normal levels of BRIGHTNESS and signal level does not change.

PICTURE.

Notes:

· When "MONITOR" is selected in PICTURE MENU, the following menu items cannot be set.

PICTURE menu: PICTURE

SCREENSAVER menu: PEAK LIMIT (see page 35)

SET UP menu: POWER SAVE (see page 37)

· If you would like to change the picture and color of the selected PICTURE menu to something else, adjust using the

items in the PICTURE menu. (see next page)

https://manual-hub.com/

PICTURE Adjustments

PICTURE

Adjusts the proper picture contrast.

Less

BRIGHTNESS Adjusts for easier viewing of dark pictures
such as night scenes and black hair.

Darker

Brighter

COLOR

Adjusts color saturation.

Less

TINT

Adjusts for natural flesh tones.

SHARPNESS Adjusts picture sharpness.

COLOR TEMP Switches to various screen color tones.
NORMAL: Intermediate color temperature. COOL: Colors with a bluish tinge. STUDIO: Optimal color temperature for studio viewing
(3200 K). WARM: Colors with a reddish tinge.
COLOR MANAGEMENT
ON: Enables color adjustment automatically.

Reddish Less

Greenish More

NORMAL WARM

COOL STUDIO*

* "STUDIO" can be modified when "Studio mode" in the OPTIONS menu is "On". (see page 42)

OFF

Notes: · "COLOR" and "TINT" settings cannot be adjusted for "RGB/PC" input signal. · You can change the level of each function (PICTURE, BRIGHTNESS, COLOR, TINT, SHARPNESS) for each
PICTURE MENU. · The setting details for STANDARD, DYNAMIC and CINEMA respectively are memorized separately for each input
terminal. · In PICTURE, there is not a noticeable change even when contrast is increased with a bright picture or reduced with
a dark picture.

Helpful Hint ( NORMALIZE Normalization)
While the "PICTURE" menu is displayed, if the OK button is pressed during "NORMALIZE", then all adjustment values are returned to the factory settings.
22
https://manual-hub.com/

ADVANCED SETTINGS

PICTURE Adjustments

Enables fine picture adjustment at a professional level. Notes: · The adjustment values are memorized separately for each input terminal. · The adjustment range values should be used as an adjustment reference.

NORMAL IZE PICTURE MENU PICTURE BRIGHTNESS SHARPNESS COLOR TEMP COLOR MANAGEMENT
ADVANCED SETTINGS

STANDARD 25 0 5
NORMAL OFF

ADVANCED SETTINGS NORMAL IZE
BLACK EXTENSION INPUT LEVEL GAMMA AGC W/B HIGH R W/B HIGH G W/B HIGH B W/B LOW R W/B LOW G W/B LOW B 3:2 PULLDOWN STUDIO GAIN NOISE REDUCTION

0 0
2.2 OFF 0 0 0 0 0 0 OFF OFF OFF

BLACK

Adjusts the dark shades of the image in gradation.

EXTENSION

INPUT LEVEL Adjustment of parts which are extremely bright and hard to see.

Less Less

More More

GAMMA

Available setting values vary depending on "PICTURE MENU" settings and the type of input signal, as follows.

PICTURE MENU S CURVE 1.0 2.0 2.2 2.5 2.6

STANDARD

DYNAMIC

CINEMA

MONITOR

Down

*1 When 2k1k signals are received with the Dual Link HD-SDI Terminal Board (TYFB11DHD), GAMMA "2.6" can also be selected.
*2 When 60 Hz signals are received, GAMMA "2.5" can also be selected. *3 When 2k1k signals are received with the Dual Link HD-SDI Terminal Board
(TY-FB11DHD), GAMMA "1.0" cannot be selected.

AGC

Increases the brightness of dark signal automatically.

OFF

"W/B" adjustment

W/B HIGH R

W/B HIGH G

W/B HIGH B

W/B LOW R

W/B LOW G

W/B LOW B

Adjusts the white balance for light red, light green or light blue areas.
Adjusts the white balance for dark red, dark green or dark blue areas.

Less

Carry out "W/B" adjustment as follows. 1. Adjust the white balance of the bright sections using the "W/B HIGH R" , "W/B HIGH G" and "W/B HIGH B" settings. 2. Adjust the white balance of the dark sections using the "W/B LOW R" , "W/B LOW G" and "W/B LOW B" settings. 3. Repeat steps 1 and 2 to adjust.
Steps 1 and 2 affect each other's settings, so repeat each step in turn to make the adjustment.

https://manual-hub.com/

PICTURE Adjustments

3:2

When "ON", the display attempts to reproduce a more natural

PULLDOWN interpretation of sources such as movie pictures, which are
recorded at 24 frames per second.

OFF

If the picture is not stable, turn the setting to "OFF".

Note:

When "ON", this setting only affects the following signal input:

· 525i (480i), 625i (575i), 1125 (1080) / 60i signal input during "COMPONENT" input signal.

STUDIO GAIN Sharpens the contrast for a better view when a part of the image

is too light to see.

OFF

OFF: Disables "STUDIO GAIN". ON: Enables "STUDIO GAIN".

Notes: · "STUDIO GAIN" can be modified when "Studio mode" in the OPTIONS menu is "On". When "Studio mode" is "Off",
this setting is "OFF" and cannot be changed. (see page 42) · This setting is valid only when the input signals are as follows:
Component Video, RGB (analog), SDI, HDMI

NOISE REDUCTION Sets the following three NR (Noise Reduction) functions together.
VIDEO NR, MOSQUITO NR, BLOCK NR

OFF ADVANCED

MIN MAX MID

[Advanced NR] Sets the three NR functions separately.

1 Select "ADVANCED".

NOISE REDUCTION

ADVANCED

VIDEO NR

OFF

MOSQUITO NR

OFF

BLOCK NR

OFF

select

2 Select the item and set.

NOISE REDUCTION

ADVANCED

VIDEO NR

OFF

MOSQUITO NR

OFF

BLOCK NR

OFF

2 set

OFF

MIN

MAX

MID

1 select

VIDEO NR:

Automatically reduces unwanted picture noise.

MOSQUITO NR: Reduces mosquito noise around subtitles on MPEG videos.

BLOCK NR: Reduces block noise when playing MPEG videos.

Notes: · "NOISE REDUCTION" cannot be adjusted while a PC signal is being applied. · "BLOCK NR" cannot be adjusted while a HD signal is being applied.

Helpful Hint ( NORMALIZE Normalization)
On the remote control unit, while the "ADVANCED SETTINGS" menu is displayed, if the OK button is pressed during "NORMALIZE", then all adjustment values are returned to the factory settings.

https://manual-hub.com/

Picture Profiles

Up to 16 combinations of picture adjustment values (in the PICTURE menu and ADVANCED SETTINGS) can be stored in the display memory as profiles and applied as needed, for a convenient way to enjoy your preferred picture settings.

NORMAL IZE PICTURE MENU PICTURE BRIGHTNESS COLOR TINT SHARPNESS COLOR TEMP COLOR MANAGEMENT
ADVANCED SETTINGS

DYNAMIC 25 0 6 0 5
NORMAL OFF

MEMORY SAVE MEMORY LOAD MEMORY EDIT
Onscreen display All Aspect Studio mode Function button assign
Memory lock

On Off Off Scrolling bar

Save profiles (page 26) Load profiles (page 27) Edit profiles (page 28)
Lock profiles (page 29, 30)

NORMAL IZE PICTURE MENU PICTURE BRIGHTNESS COLOR TINT SHARPNESS COLOR TEMP COLOR MANAGEMENT
ADVANCED SETTINGS

STANDARD 25 0 6 0 5
NORMAL OFF

Save profiles

Save the picture adjustment values in the MEMORY1 profile

Edit the profile Delete or rename the profile

My Memory MEMORY2 MEMORY3 MEMORY4

MEMORY1 MEMORY2 MEMORY3 MEMORY4

Locked profile

MEMORY16

Original picture

Load the profile Custom picture

Apply the MEMORY1 profile

NORMAL IZE PICTURE MENU PICTURE BRIGHTNESS COLOR TINT SHARPNESS COLOR TEMP COLOR MANAGEMENT
ADVANCED SETTINGS

STANDARD 0 0 0 0 0
NORMAL OFF

NORMAL IZE PICTURE MENU PICTURE BRIGHTNESS COLOR TINT SHARPNESS COLOR TEMP COLOR MANAGEMENT
ADVANCED SETTINGS

STANDARD 25 0 6 0 5
NORMAL OFF

https://manual-hub.com/

Picture Profiles
Saving profiles

Follow these steps to save picture adjustment values as profiles.

1 Specify the picture quality in the PICTURE menu and ADVANCED SETTINGS. (see page 21-24)

5 Enter a name for the profile. [Entering profile names] Profile names can be up to 16 characters.

2 In the PICTURE menu, select "MEMORY SAVE".

MEMORY SAVE

2 OK

MEMORY LOAD

MEMORY EDIT

1 select

3 Select a profile name for saving the picture adjustment values.

MEMORY SAVE

2 OK

To enter text, select characters in the on-screen keyboard. Edit the default profile name in the text box as desired.

MEMORY NAME INPUT

MEMORY1

A B C D E F G H I J K L M ALL DELETE

N O P Q R S T U V W X Y Z DELETE

abcde f gh i j k lm

nopq r s t uvwxyz

0 1 2 3 4 5 6 7 8 9 SPACE

! " # $%& '

+ / = ?@ \ ^

_ ` | ~<>( ) [ ] { } , . ; :

CANCEL

1 select 2 OK

1. [ ] 2. [ ] 3. [ 1] 4. [ ] 13. [ ] 14. [ ] 15. [ ] 16. [ ]

MEMORY1 MEMORY2 MEMORY3 MEMORY4 MEMORY13 MEMORY14 MEMORY15 MEMORY16

1 select

Profiles are labeled with these icons to indicate their locked status. (see page 27) [ ], [ ]:Settings can be saved in this profile. [ ], [ ]:Settings cannot be saved in this profile.

Example: Specifying "MY PICTURE" 1 Select "ALL DELETE".
MEMORY1
All text is deleted. To delete individual characters, select "DELETE". 2 Select "M".
M
Repeat this process to enter the next character. 3 Select "Y".
MY
4 Select "SPACE".
MY

4 Select "OK". MEMORY SAVE SAVE THE ADJUSTED VALUE IN MEMORY1

6
1 select

When you finished entering the profile name, select "OK". To cancel saving the profile, select "CANCEL".

CANCEL

2 OK

MEMORY NAME INPUT

MY PICTURE

ABCDEFGH I J

NOPQRS TUVW

abcde f gh i j

nopq r s t uvw

0123456789

! " # $%& '

_ ` | ~<>( ) [ ]

K L M ALL DELETE X Y Z DELETE k lm xyz
SPACE / = ?@ \ ^ {},.;:
CANCEL

1 select 2 OK

https://manual-hub.com/

Loading profiles

Picture Profiles

Load profiles and apply the picture adjustment values to the display as follows.
Note: Loaded profiles are stored in memory according to the selected input interface (SLOT1, 2, 3 or PC IN).

<Loading profiles from the PICTURE menu>
1 In the PICTURE menu, select "MEMORY LOAD".

MEMORY SAVE MEMORY LOAD MEMORY EDIT

2 OK 1 select

2 Select the profile to load.

1. [ ] 2. [ 1] 12. [ 2]

MEMORY1 MEMORY2 MEMORY12

2 OK 1 select

Profiles are labeled with these icons to indicate their locked status. (see below)

1 Press

to list the profiles.

2 Select the profile to load.

1. [ ] 2. [ 1] 12. [ 2]

MEMORY1 MEMORY2 MEMORY12

2 OK 1 select

Profiles are labeled with these icons to indicate their locked status. (see below)

To load profiles 19

1 Press a button in the range 2 Select "OK".
MEMORY LOAD

LOAD FROM MEMORY2 1

CANCEL

1 select 2 OK

To load profiles 1016 Example: To load profile 16

1 Press

The profile number is displayed in the upper-right

corner of the screen.

2 Select "OK". MEMORY LOAD

LOAD FROM MEMORY16

CANCEL

1 select 2 OK

Loading locked profiles... In the PICTURE menu, profiles are labeled with these icons to indicate their locked status.

NORMAL IZE PICTURE MENU PICTURE BRIGHTNESS

DYNAMIC 25 0

:Lock1 :Lock2

Operations with locked profiles are restricted. (see page 29) Picture adjustment values in the PICTURE menu cannot be changed, except for the "PICTURE MENU". Once you edit the "PICTURE MENU" setting, you can edit "PICTURE", "BRIGHTNESS", and other picture adjustment values.

Lock1 Picture adjustment values are shown.

NORMAL IZE PICTURE MENU PICTURE BRIGHTNESS COLOR TINT SHARPNESS COLOR TEMP COLOR MANAGEMENT
ADVANCED SETTINGS

DYNAMIC 25 0 6 0 5
NORMAL OFF

Can be specified.
Cannot be specified.

Lock2 Picture adjustment values are hidden.

NORMAL IZE PICTURE MENU PICTURE BRIGHTNESS COLOR TINT SHARPNESS COLOR TEMP COLOR MANAGEMENT
ADVANCED SETTINGS

DYNAMIC

Can be specified.
Cannot be specified.

https://manual-hub.com/

Picture Profiles
Editing profiles

Delete or rename profiles as follows.
<Deleting profiles> Note: Locked profiles and profiles currently in use cannot be deleted.

<Renaming profiles>
Note: Locked profiles cannot be renamed.

1 In the PICTURE menu, select "MEMORY EDIT".

MEMORY SAVE MEMORY LOAD

2 OK

MEMORY SAVE MEMORY LOAD

2 OK

MEMORY EDIT

1 select

MEMORY EDIT

1 select

2 Select "MEMORY DELETE".

2 Select "MEMORY NAME CHANGE".

MEMORY DELETE MEMORY NAME CHANGE

2 OK 1 select

MEMORY DELETE MEMORY NAME CHANGE

3 Select the profile to delete. To delete all profiles, select "ALL DELETE".

3 Select the profile to rename. 1. [ ] MEMORY1

1. [ ] 2. [ ]

MEMORY1 MEMORY2

2 OK

2. [ ] MEMORY2 12. [ ] MEMORY12

ALL DELETE

4 Select "Ok". MEMORY DELETE

DELETE THE MEMORY1 DATA.

CANCEL

4 1 select

Enter a name for the profile. Entering profile names page 26

1 select 2 OK

MEMORY NAME INPUT

MEMORY1

A B C D E F G H I J K L M ALL DELETE

N O P Q R S T U V W X Y Z DELETE

abcde f gh i j k lm

nopq r s t uvwxyz

0 1 2 3 4 5 6 7 8 9 SPACE

! " # $%& '

+ / = ?@ \ ^

_ ` | ~<>( ) [ ] { } , . ; :

CANCEL

2 OK 1 select
2 OK 1 select

5 When you finished entering the profile name, select "OK". To cancel renaming the profile, select "CANCEL".

CANCEL

1 select

2 OK

https://manual-hub.com/

Locking profiles

Picture Profiles

You can lock saved profiles to restrict operations when the profiles are loaded. You can also set passwords.

1 Display the menu screen.

2 Select "OPTIONS" and hold more.
PICTURE SET UP POS. /SIZE SOUND

for 3 seconds or
5 2 OK
(3 seconds or more) 1 select

Enter a 4-digit password. The default password is "0123".
Select "OK".
Input password

CANCEL

1 select 2 OK

OPTIONS

3 Select "Memory lock".

Onscreen display

All Aspect

Off

Studio mode

Off

Function button assign

Scrolling bar

Memory lock

6 Select the profile and specify the desired lock setting.

2 OK 1 select

MEMORY1 MEMORY2 MEMORY12 isf Mode
Change password

Lock1 Off Off Off

2 set 1 select

7 Exit the menu.

Once a profile is locked, the following operations are restricted when the profile is loaded.

Setting

Editing the Profile (MEMORY EDIT)

Editing Picture Adjustment Values via the Menu (PICTURE menu, ADVANCED SETTINGS)

Saving Picture Adjustment Values (MEMORY SAVE)

Off (unlocked) Allowed

Allowed

Lock1

Prohibited

Prohibited (picture adjustment values Allowed are shown)

Lock2

Prohibited

Prohibited (picture adjustment values Prohibited are hidden)

1 Follow steps 15 in the previous procedure, <Locking and unlocking profiles>.

2 Select "Change password".

MEMORY1 MEMORY2 MEMORY12 isf Mode

Lock1 Off Off Off

Change password

4 2 OK
1 select

Enter a new 4-digit password.

Select "OK".
Input new password

CANCEL

Note: Make a note of the new password to remember it.

5 Exit the menu.

https://manual-hub.com/

1 select 2 OK or
29

Picture Profiles

<isf Mode Setting> Switches to "PICTURE MENU" mode display.

1 Follow steps 15 in the previous procedure, <Locking and unlocking profiles>.

2 Select "isf Mode".

MEMORY1 MEMORY2 MEMORY12 isf Mode
Change password

Lock1 Off Off Off

2 set 1 select

3 Specify "On" or "Off".

4 Exit the menu.

Specifying "On" for isf Mode changes the "PICTURE MENU" mode display as follows.

"PICTURE menu" mode display

NORMAL IZE PICTURE MENU PICTURE BRIGHTNESS COLOR TINT SHARPNESS

STANDARD 25 0 6 0 5

isf Mode: Off STANDARD DYNAMIC CINEMA MONITOR

isf Mode: On STANDARD isf Mode DAY isf Mode NIGHT MONITOR

Mode display when

is selected

isf Mode: Off
PICTURE MENU STANDARD DYNAMIC CINEMA MONITOR

isf Mode: On
PICTURE MENU STANDARD isf Mode DAY
isf Mode NIGHT MONITOR

https://manual-hub.com/

Adjusting POS. /SIZE

1 Display the menu screen.

2 Select "POS. /SIZE".
PICTURE SET UP POS. /SIZE SOUND

3 Select the item and set.

NORMAL IZE AUTO SETUP
H-POS H-SIZE V-POS V-SIZE 1:1 PIXEL MODE DISPLAY SIZE

0 0 0 0
OFF OFF

4 Exit the menu.

2 OK 1 select 2 adjust or select 1 select
or

Using for menu display To display a menu for adjustment of the POS. /SIZE menu on the bottom of the screen, press

During "Digital", "SDI" and "HDMI" input signal.

NORMAL IZE AUTO SETUP
H-POS H-SIZE V-POS V-SIZE 1:1 PIXEL MODE DISPLAY SIZE

0 0 0 0
OFF OFF

During "COMPONENT", "RGB" and "PC" input signal.

NORMAL IZE AUTO SETUP
H-POS H-SIZE V-POS V-SIZE DOT CLOCK CLOCK PHASE 1:1 PIXEL MODE DISPLAY SIZE

0 0 0 0 0 -16
OFF OFF

H-POS

To hide the menu, press or

2 adjust or select 1 select the menu

Notes:

· Unadjustable items are grayed out.

Adjustable items differ depending on the input signal and the display mode.

· Adjustment details are memorized separately for different input signal formats. (Adjustments for component signals

are memorized for 525 (480) / 60i · 60p, 625 (575) / 50i · 50p, 1125 (1080) / 60i · 50i · 60p · 50p · 24p · 25p · 30p · 24sF,

1250 (1080) / 50i, 750 (720) / 60p · 50p each, and RGB/PC/Digital signals are memorized for each frequency.)

· If a "Cue" or "Rew" signal from a VCR or DVD player is received, the picture position will shift up or down. This picture

position movement cannot be controlled by the POS. /SIZE function.

AUTO SETUP
Automatically adjust H-POS / V-POS / CLOCK PHASE / DOT CLOCK and set H-SIZE / V-SIZE the

standard value when RGB signal is input.

Notes: · If the dot clock frequency is 162 MHz or higher, DOT CLOCK cannot be made.

· If the image is that the edge is hardly figured out or shadowy, that cannot be adjusted automatically.

In such case, press AUTO SETUP again after changing the image to the clearer one.

· When DVI-D is input, CLOCK PHASE cannot be adjusted automatically.

· Select NORMALIZE in POS. /SIZE and press the OK button when appropriate adjustment cannot be made.

H-POS Adjust the horizontal position.

V-POS Adjust the vertical position.

H-SIZE Adjust the horizontal size.

V-SIZE Adjust the vertical size.

https://manual-hub.com/

Adjusting POS. /SIZE

DOT CLOCK

(During "COMPONENT", "RGB" and "PC" input signal) Periodic striped pattern interference (noise) may occur when a striped pattern is displayed. If this happens, adjust so that any such noise is minimized.

CLOCK PHASE (During "COMPONENT", "RGB" and "PC" input signal)
Eliminate the flickering and distortion.

1:1 PIXEL MODE Adjusts the display size when 1125i, 1125p or 1250i signal is input.
Notes: · Select ON when you would like to replay 1920 × 1080 input signal. · Applicable input signal;
1125 (1080) / 50i · 60i · 24sF · 24p · 25p · 30p · 50p · 60p, 1250 (1080) / 50i · Select OFF when flickering is shown around the image. · H-SIZE, V-SIZE and DOT CLOCK cannot be adjusted when ON is selected.

OFF

1:1 PIXEL MODE When the input signal is a 2k1k signal (2048×1080 / 24p, 2048×1080 / 24sF), the display size is

(2k1k)

adjusted as follows.

(For 2k1k signals)

OFF

ON (LEFT)

ON (CENTER)

ON (RIGHT)

Note: 2k1k signals can only be received when the Dual Link HD-SDI Terminal Board (TY-FB11DHD) is installed.

DISPLAY SIZE Adjusts the image display size on screen.
OFF: Sets the normal image display size on screen. ON: Sets the image display size approximately 95 % of the normal image display.

OFF

Notes:

· "DISPLAY SIZE" can be modified when "Studio mode" in the OPTIONS menu is "On". When

"Studio mode" is "Off", this setting is "OFF" and cannot be changed. (see page 42)

· This setting is valid only when the input signals are as follows;

525i, 525p, 625i, 625p, 750/60p, 750/50p, 1125/60i, 1125/50i, 1125/24sF, 1125/25p, 1125/24p,

1125/30p, 1125/60p, 1125/50p, 1250/50i (Component Video, RGB, DVI, SDI, HDMI)

· When "DISPLAY SIZE" is set to "ON", "H-POS" and "V-POS" in "POS. /SIZE" can be adjusted.

· Refer to each board's operating instruction for DVI, SDI, HDMI's corresponding signals.

Helpful Hint ( NORMALIZE Normalization)
While the POS. /SIZE display is active, if the OK button is pressed during "NORMALIZE", then all adjustment values are returned to the factory settings.
32
https://manual-hub.com/

SOUND Adjustment

1 Display the menu screen.

2 Select "SOUND"
PICTURE SET UP POS. /SIZE SOUND

3 Select the item and set.

NORMAL IZE AUDIO MENU BASS MID TREBLE BALANCE SURROUND VOLUME

STANDARD 0 0 0 0
OFF 1

4 Exit the menu.

2 OK 1 select 2 adjust or select 1 select
or

NORMAL IZE AUDIO MENU BASS MID TREBLE BALANCE SURROUND VOLUME

STANDARD 0 0 0 0
OFF 1

Item

Details

AUDIO MENU

STANDARD: Emits the original sound. DYNAMIC: Accentuates sharp sound. CLEAR: Attenuates human voice.

BASS

Adjusts low pitch sounds.

MID

Adjusts normal sounds.

TREBLE

Adjusts pitch sound.

BALANCE

Adjusts left and right volumes.

SURROUND

Select ON or OFF. The benefits of surround sound are enormous. You can be completely enveloped in sound; just as if you were at a concert hall or cinema.

VOLUME

Adjust the sound volume level.

Note: BASS, MID, TREBLE and SURROUND settings are memorized separately for each AUDIO MENU.

Helpful Hint ( NORMALIZE Normalization)
While the "SOUND" menu is displayed, if the OK button is pressed during "NORMALIZE", then all adjustment values are returned to the factory settings.

SDI SOUND OUTPUT

This menu is displayed when HD-SDI Terminal Board with audio (TY-FB10HD) or Dual Link HD-SDI Terminal Board

(TY-FB11DHD) is installed to the unit.

Item

Details

SDI SOUND OUTPUT LEFT CHANNEL RIGHT CHANNEL SOUND OUT

2/2 CHANNEL 1 CHANNEL 2
ON

LEFT CHANNEL RIGHT CHANNEL

CHANNEL 1 to CHANNEL 16 Selects left audio channel.
CHANNEL 1 to CHANNEL 16 Selects right audio channel.

LEVEL METER

OFF

SOUND OUT

OFF

ON: Enables audio output.

Note:

OFF: Disables audio output.

This menu is available only when selecting a slot that HD-SDI Terminal Board with audio (TY-FB10HD) or Dual Link HD-SDI Terminal Board (TY-FB11DHD) is installed.

LEVEL METER

OFF

1-8CH

9-16CH

Sets audio channels to show in the audio level meter.

8 channels are displayed in the audio level meter; 4

channels each on both right and left sides of the display.

OFF: Hides the audio level meter.

1-8CH: Displays the audio level meter (1-8ch)

9-16CH: Displays the audio level meter (9-16ch)

https://manual-hub.com/

SCREENSAVER (For preventing image retention)

Do not display a still picture, especially in 4:3 mode, for any length of time. If the display must remain on, a SCREENSAVER should be used.

1 Display the menu screen.
2 Select "SET UP".
PICTURE SET UP POS. /SIZE SOUND

2 OK 1 select

SCREENSAVER START
FUNCTION SIDE BAR ADJUST WOBBLING PEAK LIMIT

NEGATIVE IMAGE BRIGHT OFF OFF

3 Select "SCREENSAVER".

SIGNAL

SCREENSAVER

COMPONENT/RGB-IN SELECT

RGB

EXTERNAL SCALER MODE

OFF

POWER SAVE

OFF

STANDBY SAVE

POWER MANAGEMENT

OFF

4 FUNCTION selection Select "FUNCTION" and select the desired function.

2 OK 1 select

SCREENSAVER START
FUNCTION SIDE BAR ADJUST WOBBLING PEAK LIMIT

NEGATIVE IMAGE BRIGHT OFF OFF

5 START setting Select "START".

SCREENSAVER START
FUNCTION SIDE BAR ADJUST WOBBLING PEAK LIMIT

NEGATIVE IMAGE BRIGHT OFF OFF

2 change 1 select

NEGATIVE IMAGE

SCROLLING BAR ONLY

WHITE SCREEN

OVERLAY SCROLLING BAR

NEGATIVE IMAGE

: A negative image will be displayed on the screen.

SCROLLING BAR ONLY: A white bar will scroll from left to right. The image

won't be displayed.

OVERLAY SCROLLING BAR: The brightness of the image will be decreased

and a white bar will scroll on it.

WHITE SCREEN

: The whole screen will be white.

1 select
2 OK The menu screen will disappear and the SCREENSAVER will be activated. To stop the SCREENSAVER under ON, press or any buttons on the main unit. Note: When the display is turned off, the SCREENSAVER will be deactivated.

https://manual-hub.com/

SCREENSAVER (For preventing image retention)
Reduces screen image retention

These functions prevent the occurrence of an "image retention" on the display when turned ON. WOBBLING: Automatically shifts the display image (therefore unnoticeable to the eye) to prevent image retention of sharper contour of image. ON1: Shifts the image every 30 seconds. ON2: Shifts the image at a dot level pitch depending on screen-detection. PEAK LIMIT: Suppresses image contrast (peak brightness). Note: When a still picture is viewed for an extended time, the screen may become slightly darker. (see page 45)

1 Select "WOBBLING" or "PEAK LIMIT".

2 Select "ON1", "ON2" or "OFF" (WOBBLING).
Select "ON" or "OFF" (PEAK LIMIT).

SCREENSAVER START
FUNCTION SIDE BAR ADJUST WOBBLING PEAK LIMIT

NEGATIVE IMAGE BRIGHT OFF OFF

2 change 1 select

SIDE BAR ADJUST

Do not display a picture in 4:3 mode for an extended period, as this can cause an image retention to remain on the side bars on either side of the display field. To reduce the risk of such an image retention, illuminate the side bars. This function may be applicable to the non-picture area.

Side bars 4:3 mode

1 Select "SIDE BAR ADJUST". 2 Adjust the menu.

SCREENSAVER START
FUNCTION SIDE BAR ADJUST WOBBLING PEAK LIMIT

NEGATIVE IMAGE BRIGHT OFF OFF

OFF

2 change 1 select

DARK

MID

BRIGHT

Image retention

3 Exit from SCREENSAVER.
or

Notes: · To reduce the occurrence of image retention, set the "SIDE BAR ADJUST" to "BRIGHT". · The side bar may flash (alternate black/white) depending on the picture being shown on the screen. Using Cinema
mode will reduce such flashing.

https://manual-hub.com/

Specifying the scaler

This menu can be used to specify whether the built-in scaler or an external scaler is used for scaler functions such as resizing and picture quality adjustment. The setting is valid with the following input signals. 1125 (1080) / 24p·25p·30p·50p·60p

1 Display the menu screen.

SIGNAL

SCREENSAVER

2 Select "SET UP".
PICTURE SET UP POS. /SIZE SOUND

2 OK 1 select

COMPONENT/RGB-IN SELECT

RGB

EXTERNAL SCALER MODE

OFF

POWER SAVE

OFF

STANDBY SAVE

POWER MANAGEMENT

OFF

AUTO POWER OFF

OFF

3 Select "EXTERNAL SCALER MODE" and set.

OSD DESIGN OSD POSITION OSD LANGUAGE

TYPE1 UPPER LEFT ENGLISH (US)

SIGNAL SCREENSAVER

2 change

COMPONENT/RGB-IN SELECT RGB

1 select

EXTERNAL SCALER MODE

OFF

POWER SAVE

OFF

STANDBY SAVE

POWER MANAGEMENT

OFF

OFF: Use the built-in scaler. ON: Use an external scaler.

AUTO POWER OFF OSD DESIGN OSD POSITION OSD LANGUAGE

OFF TYPE1 UPPER LEFT ENGLISH (US)

Note:

Selecting "ON" in this setting deactivates the following settings and disables

these operations.

POS. /SIZE menu:

H-SIZE, V-SIZE, 1:1 PIXEL MODE, DISPLAY SIZE

(see page 31, 32)

PICTURE menu:

BRIGHTNESS, COLOR, TINT, SHARPNESS,

MEMORY SAVE, MEMORY LOAD (see page 22,

26, 27)

ADVANCED SETTINGS: 3:2 PULLDOWN, NOIZE REDUCTION (see page

24)

SIGNAL menu:

XGA MODE (see page 40)

OPTIONS menu:

All Aspect (see page 42)

ASPECT Controls (see page 18)

"EXT. SCALER" is displayed in the menu screen to indicate that an external

scaler is in use.

4 Exit the menu.

NORMAL IZE PICTURE MENU PICTURE BRIGHTNESS COLOR TINT
or

EXT.SCALER STANDARD 25

https://manual-hub.com/

Reduces power consumption

1 Display the menu screen.
2 Select "SET UP".
PICTURE SET UP POS. /SIZE SOUND

3 Select the item and set.

SIGNAL

SCREENSAVER

COMPONENT/RGB-IN SELECT

RGB

EXTERNAL SCALER MODE

OFF

POWER SAVE

OFF

STANDBY SAVE

POWER MANAGEMENT

OFF

AUTO POWER OFF

OFF

OSD DESIGN

TYPE1

OSD POSITION OSD LANGUAGE

UPPER LEFT ENGLISH (US)

4 Exit the menu.

2 OK 1 select 2 change 1 select
or

SIGNAL

SCREENSAVER

COMPONENT/RGB-IN SELECT

RGB

EXTERNAL SCALER MODE

OFF

POWER SAVE

OFF

STANDBY SAVE

POWER MANAGEMENT

OFF

AUTO POWER OFF

OFF

OSD DESIGN

TYPE1

OSD POSITION OSD LANGUAGE

UPPER LEFT ENGLISH (US)

POWER SAVE

When this function is turned ON, luminous level of the Plasma Display is suppressed, so power consumption is reduced.

STANDBY SAVE

When this function is turned ON, power consumption of the microcomputer is reduced during power supply standby (see page 13, 15, 16), so standby power of the set is reduced.

POWER MANAGEMENT When this function is set to ON, it operates under the following conditions to turn the
power on or off automatically. When no pictures (HD/VD sync signals) are detected for 30 or so seconds during PC IN signal input:
Power is turned off (standby); the power indicator lights up orange. When pictures (HD/VD sync signals) are subsequently detected:
Power is turned on; the power indicator lights up green. Notes: · This function operates only during PC IN signal input. · This function is effective when "SYNC" is set to "AUTO" and "COMPONENT / RGB-IN
SELECT" is set to "RGB".

AUTO POWER OFF

Equipment power supply is turned OFF when there is no signal. When this is set to On, the power supply of the unit goes Off 10 minutes after the input signals stop. Note: · This function is effective for input signals except PC IN terminal.

https://manual-hub.com/

Customizing the On-Screen Menu Display

Specify the background color and display position of on-screen menus as follows.

1 Display the menu screen.

2 Select "SET UP".
PICTURE SET UP POS. /SIZE SOUND

2 OK 1 select

3 Specify the background color. Select "OSD DESIGN" and choose the background color (transparency).

STANDBY SAVE POWER MANAGEMENT AUTO POWER OFF OSD DESIGN OSD POSITION OSD LANGUAGE

ON OFF OFF TYPE1 UPPER LEFT ENGLISH (US)

TYPE1

2 change 1 select
TYPE2

TYPE3

4 Specify the display position. Select "OSD POSITION" and choose the display position.

STANDBY SAVE POWER MANAGEMENT AUTO POWER OFF OSD DESIGN OSD POSITION OSD LANGUAGE

ON OFF OFF TYPE1 UPPER LEFT ENGLISH (US)

2 change 1 select

SIGNAL

SCREENSAVER

COMPONENT/RGB-IN SELECT

RGB

EXTERNAL SCALER MODE

OFF

POWER SAVE

OFF

STANDBY SAVE

POWER MANAGEMENT

OFF

AUTO POWER OFF

OFF

OSD DESIGN

TYPE1

OSD POSITION

UPPER LEFT

OSD LANGUAGE

ENGLISH (US)

Each time you press or , the on-screen menu display position changes. Display example

UPPER LEFT
5 Exit the menu. or

CENTER

https://manual-hub.com/

SET UP for Input Signals

COMPONENT / RGB IN SELECT
Select to match the signals from the source connected to the COMPONENT / RGB input terminals. Y, PB, PR signals "COMPONENT" RGB signals "RGB"
1 Display the menu screen.

2 Select "SET UP".
PICTURE SET UP POS. /SIZE SOUND

2 OK 1 select

3 Select "COMPONENT / RGB-IN SELECT" and set.

SIGNAL

SCREENSAVER

COMPONENT/RGB-IN SELECT

RGB

EXTERNAL SCALER MODE

OFF

POWER SAVE

OFF

2 change
1 select COMPONENT RGB

4 Exit the menu. or

Notes: · Selection may not be possible, depending on which optional board is installed. · Make setting of the selected input terminal (SLOT1, SLOT2, SLOT3 or PC IN).

YUV / RGB IN SELECT

Select to match the signals from the source connected to the DVI input terminals. YUV signals "YUV" RGB signals "RGB"
1 Display the menu screen.

2 Select "SET UP".
PICTURE SET UP POS. /SIZE SOUND

2 OK 1 select

3 Select "YUV / RGB-IN SELECT" and set.

SIGNAL

SCREENSAVER

YUV/RGB-IN SELECT

RGB

EXTERNAL SCALER MODE

OFF

POWER SAVE

OFF

YUV

2 change
1 select RGB

4 Exit the menu. or

Notes: · Selection may not be possible, depending on which optional board is installed. · Make setting of the selected input terminal (SLOT1 or SLOT2).
39

https://manual-hub.com/

SET UP for Input Signals
SIGNAL menu

Note: "SIGNAL" setup menu displays a different setting condition for each input signal.

SIGNAL

SCREENSAVER

COMPONENT/RGB-IN SELECT

RGB

EXTERNAL SCALER MODE

OFF

POWER SAVE

OFF

STANDBY SAVE

POWER MANAGEMENT

OFF

AUTO POWER OFF

OFF

OSD DESIGN

TYPE1

OSD POSITION

UPPER LEFT

OSD LANGUAGE

ENGLISH (US)

For RGB

SIGNAL SYNC XGA MODE REFRESH RATE
H-FREQ. V-FREQ. SIGNAL FORMAT

[ RGB ] AUTO 1024 ×768 100 Hz 33.7 kHz 60.0 Hz 1125(1080)/60i

For COMPONENT

SIGNAL XGA MODE REFRESH RATE
H-FREQ. V-FREQ. SIGNAL FORMAT

[ COMPONENT ] 1024 ×768 100 Hz
33.7 kHz 60.0 Hz 1125(1080)/60i

For Digital

SIGNAL REFRESH RATE
H-FREQ. V-FREQ. DOT CLOCK-FREQ. SIGNAL FORMAT

[ Digital ] 100 Hz 33.7 kHz 60.0 Hz 108.0 MHz 1125(1080)/60i

XGA MODE

This menu is displayed when the input signal is analog (Component/PC). This unit supports three types of XGA signals with 60Hz vertical frequency having different aspect ratios and sampling rates (1,024 × 768 @ 60Hz, 1,280 × 768 @ 60Hz, and 1,366 × 768 @ 60Hz). Be sure to make settings in accordance with the input signal in order to achieve a more appropriate and attractive display. In addition, after making this setting, be sure to make each adjustment (such as "AUTO SETUP") on the "POS. /SIZE" menu as necessary. (see page 30)

SIGNAL XGA MODE REFRESH RATE

[ COMPONENT ] 1024 ×768 100 Hz

2 change

1 select

1024×768

1280×768

1366×768

REFRESH RATE

This function sets the refresh rate of the display. This menu is displayed when the input signal is 50 Hz system (50i, 50p, 25p, 24p, 24sF) of vertical scan rate.
100 Hz: Reduce screen flicker. 50 Hz: Enhance the resolution of moving images.
Note: It is recommended to set to 100 Hz normally.

SIGNAL XGA MODE REFRESH RATE
40

[ COMPONENT ] 1024 ×768 100 Hz

100 Hz

2 change 1 select 50 Hz

https://manual-hub.com/

SYNC

SET UP for Input Signals

Select SIGNAL from the "SET UP" menu during RGB input signal.

SIGNAL SYNC XGA MODE REFRESH RATE

[ RGB ] AUTO 1024 ×768 100 Hz

2 change 1 select

AUTO

ON G

VBS

Setting RGB sync signal
Confirm that the input is set to RGB INPUT (this setting is valid only for RGB INPUT signal)
AUTO: The H and V sync or synchronized signal are automatically selected. If both input, it is selected the H and V sync.
ON G: Uses a synchronized signal on the Video G signal, which is input from the G connector. VBS: Uses a synchronized signal of Composite Sync input, which is input from the HD connector.

SDI THROUGH

Set the active through function of the Dual Link HD-SDI Terminal Board (TY-FB11DHD).
Note: Settings can only be performed for this menu when a slot mounted with a Dual Link HD-SDI Terminal Board (TY-FB11DHD) is selected.

SIGNAL SDI THROUGH REFRESH RATE

[ Digital ] OFF 100 Hz

2 change 1 select

OFF

ON: Enables active through. OFF: Disables active through.

Input signal display
Displays the frequency and the type of the current input signal.
This display is valid only for COMPONENT/RGB/PC and Digital input signal. Display range:
Horizontal 15 - 110 kHz Vertical 48 - 120 Hz
The dot clock frequency is displayed during digital signal input.

H-FREQ. V-FREQ. SIGNAL FORMAT

33.7 kHz 60.0 Hz 1125(1080)/60i

H-FREQ. V-FREQ. DOT CLOCK-FREQ. SIGNAL FORMAT

33.7 kHz 60.0 Hz 108.0 MHz 1125(1080)/60i

https://manual-hub.com/

OPTIONS Adjustments

1 Display the menu screen.
2 Select "OPTIONS". 3 Press for more than 3 seconds.
PICTURE SET UP POS. /SIZE SOUND
OPTIONS

2 OK (more than 3 seconds)
1 select

Onscreen display All Aspect Studio mode Function button assign
Memory lock

On Off Off Scrolling bar

4 Select the item and set.

Onscreen display All Aspect Studio mode Function button assign
Memory lock

On Off Off Scrolling bar

5 Exit the menu.

2 set 1 select
or

Item Onscreen display
All Aspect
Studio mode Function button
assign Memory lock

Adjustments

On: Displays all the following on screen. · Power on display · Input signal switch display · No signal display
· Mute after was pressed.
Off: Hides all the items above from view.

Sets All Aspect mode (advanced aspect setting) or default aspect mode.

With each press of button, the aspect changes in the selected mode.
Off: Default aspect mode On: All Aspect mode Aspect mode of each setting is as follows: (Example: HD signal) Off 4:3H-FILLZOOMFULLJUST On 4:3 (1)4:3 (2)4:3 FullZoom1Zoom2Zoom316:914:9Just1Just2

For switching functions in setting menus used for television studio applications.

Studio mode: On

Studio mode: Off

COLOR TEMP STUDIO GAIN
DISPLAY SIZE

"STUDIO" can be selected. Can be switched ON and OFF. Can be switched ON and OFF.

"STUDIO" not available. Cannot be specified (set to "OFF" and cannot be changed). Cannot be specified (set to "OFF" and cannot be changed).

Specifies the function activated when the

button on the remote control is pressed.

Scrolling bar: Activates the SCROLLING BAR ONLY screensaver. After 15 minutes, the display enters standby mode.
Test patterns:Each time you press , a different test pattern is displayed (seven in all).

Locks or unlocks saved profiles. Also for setting passwords. (see page 29)

https://manual-hub.com/

Watching Videos and DVDs

If you have applicable equipment connected to the Display, you can easily watch videos and DVDs using the Display's remote control. You can select the external equipment to access. To operate other manufacturers' equipment, you need to register the code for the equipment. (see page 44)

1 Select the input mode. (see page 14) INPUT

HDMI1

HDMI2

INPUT

HDMI3

HDMI4

COMPONENT

2 Select the remote control mode. Press the key to select.

DISPLAY VCR DBS/CBL DVD

DISPLAY

COMPO.

HDMI

CH INPUT

3 Operate the connected equipment, pointing Display's remote control at the equipment.

Example

VCR MODE

DVD MODE

VCR Record

Record

Skip Reverse/Forward

DISPLAY

Rewind/Fast Forward

Reverse/Forward

Stop

Pause

Play

(For other operations, see page 47)

https://manual-hub.com/

Watching Videos and DVDs
Programming the Remote to Operate Peripheral Equipment

You can operate other manufacturers' equipment using this Display's remote control.

1 Connect the external equipment to the Display and Power Off the external equipment.

2 Press both buttons simultaneously for more than 3 seconds.

Release the buttons when the equipment selection buttons start flashing.

3 Select the equipment.

VCR DBS/CBL DVD

The selected button remains lit (other buttons are not lit).

4 Input the equipment's 4-digit remote control code. (see page 48, 49)

5 Operate the equipment with the remote control.
(see page 47) The external equipment turns On.

Press to return to the Display mode. DISPLAY

DISPLAY

COMPO.

HDMI

CH INPUT

DISPLAY

If the equipment does not operate with the remote control
· When your equipment has a single code Input the remote control code again
· When your equipment has multiple codes Change the code with 4 above and test again
Note: Registration will fail if the wrong code is input or it takes more than 30 seconds to register.

To find a code not listed in the code list

This procedure searches all codes and is called the "sequence method."

1 After step 3 above, change the code and test.

2 When the correct code is found.

store

change

Operate the equipment with the remote control. (see page 47)
· Repeat until the code is found. · It may take many attempts before the correct code is
found.

https://manual-hub.com/

Troubleshooting

Before you call for service, determine the symptoms and make a few simple checks as shown below.

Symptoms

Picture

Sound

Interference

Noisy Sound

Normal Picture

No Sound

No Picture

No Sound

No Picture

Normal Sound

Checks
Electrical Appliances Cars / Motorcycles Fluorescent light
Volume (Check whether the mute function has been activated on the remote control.)
Not plugged into AC outlet Not switched on PICTURE and BRIGHTNESS/Volume setting (Check by pressing the power switch or stand-by button on the remote control.)
If a signal with a non-applicable color system format, or frequency is input, only the input terminal indication is displayed.

No Color

Normal Sound Color controls set at minimum level. (see page 21- 24)

No remote control operations can be performed.
A cracking sound is sometimes heard from the unit.
The top or bottom of the picture on the screen is cut off when I use the zoom function. Areas at the top and bottom of the screen where the image is missing appear when I use the zoom function.

Check whether the batteries have discharged completely and, if they have not, whether they were inserted properly. Check whether the remote control sensor is exposed to an outdoor light or a strong fluorescent light. Check whether the remote control designed specifically for use with the unit is being used. (The unit cannot be operated by any other remote control.)
If there is nothing wrong with the picture or sound, this is the sound of the cabinet undergoing very slight contractions in response to changes in the room temperature. There are no adverse effects on the performance or other aspects.
Adjust the position of the picture on the screen.
When using a video software program (such as a cinema size program) with a screen wider than one in the 16:9 mode, blank areas separate from the images are formed at the top and bottom of the screen.

I can hear sounds coming from inside the unit.

When the power is turned on, a sound of the display panel being driven may be heard: This is normal and not indicative of malfunctioning.

This Plasma Display uses special image processing. Hence a slight time lag may occur between image and audio, depending on the type of input signal. However, this is not a malfunction.

Plasma Display panel Symptoms
The screen darkens slightly when bright pictures with minimal movements are shown. It takes a while for the picture to appear. The edges of the images flicker. The brightness on both sides of images in 4:3 mode changes. Some parts of the screen do not light up.
Image retention appears Whirring sounds can be heard from the display unit.

Check
The screen will darken slightly when photos, still images of a computer or other pictures with minimal movements are shown for an extended period. This is done to reduce image retention on the screen and the shortening of the screen's service life: It is normal and not indicative of malfunctioning.
The unit digitally processes the various signals in order to reproduce esthetically pleasing images. As such, it sometimes takes a few moments for the picture to appear when the power has been turned on, when the input has been switched.
Due to the characteristics of the system used to drive the panel, the edges may appear to flicker in the fast-moving parts of the images: This is normal and not indicative of malfunctioning.
When viewing the side panels at the "BRIGHT" or "MID" setting, the brightness on both sides may change depending on the kind of program shown: This is normal and not indicative of malfunctioning.
The plasma display panel is manufactured using an extremely high level of precision technology, however, sometimes some parts of the screen may be missing picture elements or have luminous spots. This is not a malfunction.
Do not allow a still picture to be displayed for an extended period, as this can cause a permanent image retention to remain on the Plasma Display. Examples of still pictures include logos, video games, computer images, teletext and images displayed in 4:3 mode. Note: The permanent image retention on the Plasma Display resulting from fixed image use is not an operating defect and as such is not covered by the Warranty. This product is not designed to display fixed images for extended periods of time.
The display unit is fitted with a cooling fan to dissipate heat generated during normal use. The whirring sound is caused by rotation of the fan and is not a malfunction.

https://manual-hub.com/

List of Aspect Modes

Aspect mode

All Aspect: Factory setting

All Aspect: Off

Picture Enlarged screen

16:9

FULL

Description
The display of the pictures fills the screen. In the case of SD signals, pictures with a 4:3 aspect ratio are enlarged horizontally, and displayed. This mode is suited to displaying anamorphic pictures with a 16:9 aspect ratio.

14:9

Just Just1

JUST

Just2

JUST

4:3 4:3
4:3 (1)
4:3 (2) 4:3

4:3 Full H-FILL

Zoom Zoom1

ZOOM

Zoom2 ZOOM

Zoom3

Letterbox pictures with a 14:9 aspect ratio are enlarged vertically and horizontally so that their display fills the screen vertically and is slightly smaller than the screen horizontally. The top and bottom edges of the pictures are cut off. Side panels are displayed at the left and right edges of the screen.
Pictures with a 4:3 aspect ratio are enlarged horizontally so that the picture distortion is minimized. The display of the areas around the left and right edges of the screen is slightly elongated.
Pictures with a 4:3 aspect ratio are enlarged horizontally so that the picture distortion is minimized. The left and right edges of the pictures are cut off. The display of the areas around the left and right edges of the screen is slightly elongated.
Pictures with a 4:3 aspect ratio are displayed with their original aspect ratio. Side panels are displayed at the left and right edges of the screen.
Pictures with a 4:3 aspect ratio are displayed with their original aspect ratio. The left and right edges of the pictures are masked by side panels.
Pictures with a 4:3 aspect ratio are enlarged horizontally so that their display fills the screen. The left and right edges of the pictures are cut off.
Letterbox pictures with a 16:9 aspect ratio are enlarged vertically and horizontally so that their display fills the screen. The top and bottom edges of the pictures are cut off.
Letterbox pictures with a 16:9 aspect ratio are enlarged vertically and horizontally so that their display fills the screen. The top and bottom edges as well as the left and right edges of the pictures are cut off.
Letterbox pictures with a 2.35:1 aspect ratio are enlarged vertically and horizontally so that their display fills the screen vertically and is slightly larger than the screen horizontally. The top and bottom edges as well as the left and right edges of the pictures are cut off.

https://manual-hub.com/

Remote Control Operation / Code List

The following explains how to operate external devices with the Display's remote control. Register the remote control codes (page 44) if you want to operate an external device from another manufacturer. (see page 48, 49)
Note: Operation may not be possible depending on the available memory size of the remote control. This remote control is not designed to cover operation of all functions of all models.
Remote Control Operation List This chart defines which keys are operational after programming (if needed) while in the selected remote control mode, CABLE, DBS, VCR, or DVD.

KEY NAME
CH INPUT

VCR MODE
Power Channel Up/Down 0-9 TV/VCR Switch Rewind/Fast Forward Record Stop Pause Play

Power

(DBS)

DBS/CBL MODE Power

(CBL)

Menu PPV/VOD Up/Down/Left/Right Select

Channel Up/Down

0-9 Page Down/Up TV/DBS Switch Rewind/Fast Forward Record *1 Stop Pause Play

0-9 Page Down/Up TV/CBL Switch Rewind/Fast Forward Record *1 Stop Pause Play

DVD MODE

Power

Functions Return Up/Down/Left/Right Enter

Channel Up/Down

0-9

Skip Reverse/Forward

Reverse/Forward

Record

Stop

Still/Pause

Play

*1: Combination type

https://manual-hub.com/

Remote Control Operation / Code List

Remote Control Code List

DBS / CABLE (Cable Set Top Box)

Brand ABC

Code 0003, 0008, 0014, 0017

Brand GoldStar

Americast

0899

Hamlin

Amino

1602, 1822

i3 Micro

Bell & Howell

0014

Jerrold

Bell South

0899

Clearmaster

0883

Memorex

ClearMax

0883

Motorola

Coolmax

0883

Digeo

1187

Multitech

Digi

0637

Myrio

Director

0476

Pace

Dumont

0637

Panasonic

General Instrument 0003, 0276, 0476, 0810

Panther

Code 0144 0009, 0273 1602 0003, 0012, 0014, 0276, 0476, 0810
0000 0276, 0476, 0810, 1106, 1187, 1254, 1376
0883 1602, 1822 0008, 0237, 1877 0000, 0107, 1786 0637

DBS / CABLE ( Satellite Set Top Box)

Brand AlphaStar

Code 0772

Brand GE

Century

0856

General Instrument

Chaparral

0216

GOI

Crossdigital

1109

Gradiente

DirecTV

0099, 0247, 0392, 0566, 0639, 0724, 0749, 0819, 1076, 1108, 1109, 1142, 1377, 1392, 1414, 1442, 1443, 1444, 1538, 1539, 1609, 1639, 1640, 1749, 1856

Dish Network System 0775, 1005, 1170, 1171, 1505, 1775

Hisense
Hitachi
HTS
Hughes Network Systems

Humax

Dishpro

0775, 1005, 1505, 1775

iLo

Echostar

0775, 1005, 1170, 1171, 1505, 1775 JVC

Expressvu

0775, 1775

Magnavox

Code 0566 0869 0775, 1775 0856 1535 0819, 1250 0775, 1775 0749, 1142, 1442, 1443, 1444, 1538, 1539, 1749
1790 1535 0775, 1170, 1775 1226, 1414 0724, 0722

VCR
Brand ABS Admiral Adventura Aiko Aiwa Akai Alienware America Action American High Asha Audiovox Beaumark Bell & Howell Broksonic
Calix Canon Carver CCE Citizen Colt Craig Curtis Mathes Cybernex CyberPower Daewoo Dell Denon DirecTV Durabrand Dynatech Electrohome Electrophonic Emerex Emerson
Fisher Fuji Funai Garrard Gateway GE
Go Video GoldStar

Code 1972 0048, 0209 0000 0278 0000, 0037, 0124 0041 1972 0278 0035 0240 0037, 0278 0240 0104 0002, 0121, 0184, 0209, 0479, 1479
0037 0035 0081 0072, 0278 0037, 0278, 1278 0072 0037, 0047, 0072, 0240 0035, 0041, 0060, 0162, 1035 0240 1972 0045, 0278, 1278 1972 0042 0739, 0740, 0745, 1239, 1240 0038, 0039 0000 0037 0037 0032 0000, 0002, 0037, 0043, 0121, 0184, 0209, 0278, 0479, 0593, 1278, 1479, 1593
0047, 0104 0033, 0035 0000, 0593, 1593 0000 1972 0035, 0060, 0240, 0807, 1035, 1060
0432, 0614 0037, 0038, 1237

Brand Gradiente Harley Davidson Harman/Kardon Harwood Hewlett Packard HI-Q Hitachi Howard Computers HP Hughes Network Systems
Humax Hush iBUYPOWER Jensen JVC KEC Kenwood KLH Kodak LG Linksys Lloyd's Logik LXI Magnasonic Magnavox
Magnin Marantz Marta Media Center PC MEI Memorex

Code 0000 0000 0038, 0081 0072 1972 0047 0000, 0041, 0042, 0089 1972 1972 0042, 0739, 0740, 0745, 1239, 1240
0739 1972 1972 0041 0041, 0067 0037, 0278 0038, 0041, 0067 0072 0035, 0037 1037 1972 0000 0072 0037 0593, 1278 0000, 0035, 0039, 0081, 0149, 0563, 0593, 1593, 1781
0240 0035, 0081 0037 1972 0035 0000, 0035, 0037, 0039, 0047, 0048, 0104, 0162, 0209, 0240, 0479, 1037, 1162, 1237, 1262

MGA MGN Technology Microsoft Mind Minolta Mitsubishi Motorola MTC Multitech NEC

0240, 0043 0240 1972 1972 0042 0043, 0067, 0807 0035, 0048 0000, 0240 0000, 0072 0038, 0041, 0067, 0104

Brand Paragon Philips Pioneer Pulsar Quasar RadioShack RCA Regal Runco Samsung Scientific Atlanta Sejin Sony

Code 0000 0317, 1305 0144, 0533, 0877, 1877 0000 0000 0883 1256 0273, 0279 0000 0144 0008, 0017, 0477, 0877, 1877 1602 1006

Brand Starcom Supercable Supermax Thomson Tocom Torx Toshiba Tristar V2 Viewmaster Vision Vortex View Zenith

Code 0003 0276 0883 1256 0012 0003 0000 0883 0883 0883 0883 0883 0000, 0525, 0899

Brand Memorex Mitsubishi Motorola Next Level Panasonic Paysat Philips
Proscan Proton RadioShack RCA Samsung

Code 0724 0749 0869 0869 0247, 0701 0724 0099, 0722, 0724, 0749, 0856, 1076, 1142, 1442, 1749
0392, 0566 1535 0869 0566, 0855, 0143, 1392 1108, 1109, 1276, 1377, 1442, 1609

Brand Sony Star Choice Tivo
Toshiba UltimateTV Uniden US Digital USDTV Voom Zenith

Code 0639, 1639, 1640 0869 1142, 1442, 1443, 1444, 1538, 1539
0749, 0790, 1285, 1749 1392, 1640 0724, 0722 1535 1535 0869 0856, 1856

Brand Nikko Niveus Media Noblex Northgate Olympus Optimus
Orion Panasonic
Penney
Pentax Philco Philips
Pilot Pioneer Polk Audio Presidian Profitronic Proscan Protec Pulsar Quasar RadioShack Radix Randex RCA
Realistic
ReplayTV Ricavision Runco Samsung Sanky Sansui
Sanyo Scott Sears
Sharp Shintom Shogun

Code 0037 1972 0240 1972 0035 0037, 0048, 0104, 0162, 0432, 0593, 1062, 1162, 1262
0002, 0184, 0209, 0479, 1479 0035, 0162, 0225, 0614, 0616, 1035, 1062, 1162, 1262
0035, 0037, 0038, 0042, 0240, 1035, 1237
0042 0035 0035, 0081, 0618, 0739, 1081, 1181
0037 0067 0081 1593 0240 0060, 1060 0072 0039 0035, 0162, 1035, 1162 0000, 1037 0037 0037 0042, 0060, 0149, 0240, 0807, 0880, 1035, 1060
0000, 0035, 0037, 0047, 0048, 0104
0614, 0616, 1615, 1616 1972 0039 0045, 0240, 0739, 1014 0039, 0048 0000, 0041, 0067, 0209, 0479, 1479
0047, 0104, 0240 0043, 0045, 0121, 0184 0000, 0035, 0037, 0042, 0047, 0104, 1237
0048, 0807, 0848 0072 0240

Brand Singer Sonic Blue Sony

Code 0072
0614, 0616, 1615, 1616
0000, 0032, 0033, 0035, 0636, 1032, 1232, 1972

Stack 9 STS Sylvania

1972
0042
0000, 0035, 0043, 0081, 0593, 1593, 1781

Symphonic Systemax Tagar Systems Tatung Teac Technics Teknika Thomas Tivo

0000, 0593, 1593 1972 1972 0041 0000, 0041 0035, 0162 0000, 0035, 0037 0000 0618, 0636, 0739, 0740, 0745, 1239, 1240, 1503, 1996

TMK Toshiba

0240
0043, 0045, 0845, 1008, 1145, 1503, 1972, 1996

Totevision Touch Unitech Vector Vector Research Video Concepts Videomagic Videosonic Viewsonic Villain Voodoo Wards

0037, 0240 1972 0240 0045 0038 0045 0037 0240 1972 0000 1972 0000, 0035, 0042, 0047, 0048, 0060, 0072, 0081, 0149, 0240

White Westinghouse XR-1000 Yamaha Zenith

0072, 0209
0000, 0035, 0072
0038
0000, 0033, 0039, 0209, 0479, 1479

ZT Group

1972

https://manual-hub.com/

Remote Control Operation / Code List

Remote Control Code List (Continued)

DVD Recorder / Player

Brand Accurian

Code 1072, 1416

Advent

1016

Aiwa

0641

Akai

0695, 0770, 0899, 1089

Alco

0790

Allegro

0869

Amphion Media Works 0872

Apex Digital

0672, 0717, 0755, 0794, 0796, 0797, 0830, 1004, 1020, 1056, 1061, 1100

Arrgo Aspire Digital Audiovox Axion Blaupunkt Blue Parade Broksonic Cinea CineVision Citizen Coby

1023 1168, 1407 0790, 1071, 1072, 1121, 1122 1071, 1072 0717 0571 0695, 0868 0831 0833, 0869, 0876 0695, 1277 0778, 0852, 1086, 1107, 1165, 1177

Craig Curtis Mathes CyberHome
Daewoo
Denon Desay Disney Dual Durabrand DVD2000 Emerson Enterprise ESA

0831 1087 0816, 0874, 1023, 1024, 1117, 1129, 1502
0705, 0784, 0833, 0869, 1169, 1172, 1234, 1242, 1441
0490, 0634 1407 0675, 1270 1068, 1085 1127 0521 0591, 0675, 0821, 1268 0591 0821, 1268

Brand Fisher Funai Gateway GE Go Video
Go Vision GoldStar Greenhill Harman/Kardon Hitachi Hiteker Humax iLo Initial Insignia Integra JBL Jensen JSI JVC jWin Kawasaki Kenwood KLH Konka Koss Landel Lasonic Lenoxx LG LiteOn Loewe Magnavox
Malata

Code 0670 0675, 1268, 1334 1073, 1077, 1158, 1194 0522, 0815, 0717 0715, 0741, 0744, 0783, 0833, 0869, 1044, 1075, 1099, 1158, 1304, 1730
1071, 1072 0741 0717 0582, 0702 0573, 0664, 1247 0672 1588 1348 0717 1268 0627 0702 1016 1423 0558, 0623, 0867, 1164 1049 0790 0490, 0534 0717, 0790, 1020, 1149 0711, 0719, 0720 0651, 0896, 1423 0826 0798, 1173 1127 0591, 0741, 0801, 0869 1058, 1158, 1416, 1440 0511, 0885 0503, 0539, 0646, 0675, 0821, 1268
0782, 1159

Brand

Code

Marantz

0539

Memorex

0695, 0831, 1270

Microsoft

0522, 1708

Mintek

0717, 0839

Mitsubishi

0521, 1521

Momitsu

1082

NAD

0741

NEC

0785

Nesa

0717

Next Base

0826

NexxTech

1402

Norcent

0872, 1003, 1107, 1265

Onkyo

0503, 0627, 0792

OptoMedia Electronics 0896

Oritron

0651

Panasonic

0490, 0703, 1362, 1462, 1490, 1762, 1779, 2060, 2061, 2062

Philips

0503, 0539, 0646, 0675, 0854, 1260, 1267, 1354

Pioneer Polaroid Polk Audio Portland Presidian Prima Proscan ProVision Qwestar RCA

0525, 0571, 0631 1020, 1061, 1086 0539 0770 0675, 1072 1016 0522 0778 0651 0522, 0571, 0717, 0790, 0822, 1022, 1132, 1769

Rio Rotel Rowa Sampo Samsung

0869 0623 0823 0698, 0752 0199, 0490, 0573, 0820, 0899, 1044, 1075

Sansui

0695

Brand Sanyo Sensory Science Sharp Sharper Image Sherwood Shinsonic Sonic Blue Sony
Sova Superscan SVA Sylvania Symphonic Teac Technics Technosonic Theta Digital Toshiba
Tredex Urban Concepts US Logic Venturer Vizio Xbox Yamaha Zenith Zoece AMW

Code 0670, 0695, 0873 1158 0630, 0675, 0752, 1256 1117 0633, 0770, 1043, 1077 0533, 0839 0869, 1099 0533, 0864, 1033, 1070, 1431, 1533
1122 0821 0860, 1105 0675, 0821, 1268 0675, 0821 0790 0490, 0703 0730 0571 0503, 0695, 1045, 1154, 1588, 1769
0800 0503 0839 0790 1064, 1226 0522, 1708 0490, 0539, 0545 0503, 0591, 0741, 0869 1265 0872

https://manual-hub.com/

Applicable Input Signals

Signal name

Horizontal frequency Vertical frequency

(kHz)

(Hz)

525 (480) / 60i

525 (480) / 60p

625 (575) / 50i

625 (575) / 50p

625 (576) / 50p

750 (720) / 60p

750 (720) / 50p

1,125 (1,080) / 60p

1,125 (1,080) / 60i

1,125 (1,080) / 50p

1,125 (1,080) / 50i

1,125 (1,080) / 24sF

1,125 (1,080) / 30p

1,125 (1,080) / 25p

1,125 (1,080) / 24p

1,250 (1,080) / 50i

2,048 × 1,080 / 24sF 7

2,048 × 1,080 / 24p 7

640 × 400 @70 Hz

640 × 480 @60 Hz

640 × 480 @72 Hz

640 × 480 @75 Hz

640 × 480 @85 Hz

800 × 600 @56 Hz

800 × 600 @60 Hz

800 × 600 @72 Hz

800 × 600 @75 Hz

800 × 600 @85 Hz

852 × 480 @60 Hz

1,024 × 768 @50 Hz

1,024 × 768 @60 Hz

1,024 × 768 @70 Hz

1,024 × 768 @75 Hz

1,024 × 768 @85 Hz

1,066 × 600 @60 Hz

1,152 × 864 @60 Hz

1,152 × 864 @75 Hz

1,280 × 768 @60 Hz

1,280 × 960 @60 Hz

1,280 × 960 @85 Hz

1,280 × 1,024 @60 Hz

1,280 × 1,024 @75 Hz

1,280 × 1,024 @85 Hz

1,366 × 768 @50 Hz

1,366 × 768 @60 Hz

1,400 × 1,050 @60 Hz

1,600 × 1,200 @60 Hz

1,600 × 1,200 @65 Hz

1,920 × 1,080 @60 Hz

1,920 × 1,200 @60 Hz

51 Macintosh13" (640 × 480)

52 Macintosh16" (832 × 624)

53 Macintosh21" (1,152 × 870)

15.73 31.47 15.63 31.25 31.25 45.00 37.50 67.50 33.75 56.26 28.13 27.00 33.75 28.13 27.00 31.25 27.00 27.00 31.46 31.47 37.86 37.50 43.27 35.16 37.88 48.08 46.88 53.67 31.47 39.55 48.36 56.48 60.02 68.68 37.64 53.70 67.50 47.70 60.00 85.94 63.98 79.98 91.15 39.55 48.36 65.22 75.00 81.25 67.50 74.04 35.00 49.72 68.68

59.94 59.94 50.00 50.00 50.00 60.00 50.00 60.00 60.00 50.00 50.00 48.00 30.00 25.00 24.00 50.00 48.00 24.00 70.07 59.94 72.81 75.00 85.01 56.25 60.32 72.19 75.00 85.06 59.94 50.00 60.00 70.07 75.03 85.00 59.94 60.00 75.00 60.00 60.00 85.00 60.02 75.03 85.02 50.00 60.00 60.00 60.00 65.00 60.00 59.95 66.67 74.54 75.06

Component / RGB / Mini D-sub 15P (Dot clock (MHz))
* (13.5)
* (27.0) 5
* (13.5) * (27.0)
* (74.25) * (74.25)
* (148.5) 1 * (74.25) 1 * (148.5) 1 * (74.25) 1 * (74.25) 2 * (74.25) 1 * (74.25) 1 * (74.25) 1 * (74.25) 3
* (25.17)
* (25.18) 6
* (31.5) * (31.5) * (36.0) * (36.0) * (40.0) * (50.0) * (49.5) * (56.25)
* (33.54) 6
* (65.0) * (75.0) * (78.75) * (94.5) * (53.0)
* (108.0) * (80.14) * (108.0) * (148.5) * (108.0) * (135.0) * (157.5)
* (86.71)
* (162.0) * (175.5)
* (148.5) 4
* (30.24) * (57.28) * (100.0)

DVI-D 8
(Dot clock (MHz))
* (27.0)
* (27.0) * (74.25) * (74.25) * (148.5) * (74.25) * (148.5) * (74.25) * (74.25) * (74.25) * (74.25)
* (25.18)
* (40.0)
* (34.24) * (51.89) * (65.0)
* (53.0) * (81.62)
* (108.0)
* (69.92) * (87.44) * (122.61) * (162.0) * (148.5) * (154.0)

1: Based on SMPTE 274M standard.

2: Based on SMPTE RP211 standard.

3: Based on SMPTE 295M standard.

4: The input signal is recognized as 1,125 (1,080) / 60p.

5: When selected the RGB format and 525p signal input to the Mini D-sub 15P terminal, it is recognized as VGA 60Hz signal.

6: When inputted VGA 60Hz format signal from the other than Mini D-sub 15P terminal, it is recognized as 525p signal.

7: Based on SMPTE 292M and 372M standards. These signals can be received when the Dual Link HD-SDI Terminal

Board (TY-FB11DHD) is installed.

8: These signals can be received when the DVI-D Terminal Board (TY-FB11DD) is installed.

Note: Signals without above specification may not be displayed properly.

https://manual-hub.com/

Applicable Input Signals

VIDEO input (HDMI)

Signal format

Vertical

Horizontal

frequency (Hz) frequency (kHz)

1 VGA60

59.94

31.47

2 525/60p

59.94

31.47

3 625/50p

50.00

31.25

4 750/60p

60.00

45.00

5 750/50p

50.00

37.50

6 1125/60i

60.00

33.75

7 1125/50i

50.00

28.13

8 1125/60p

60.00

67.50

9 1125/50p

50.00

56.26

10 1125/24p

24.00

27.00

Audio signal Linear PCM : 48/44.1/32 kHz

Dot clock (MHz) 25.18 27.00 27.00 74.25 74.25 74.25 74.25 148.50 148.50 74.25

Number of active pixels
640 720 720 1280 1280 1920 1920 1920 1920 1920

Total number of pixels 800 858 864 1650 1980 2200 2640 2200 2640 2750

Number of active lines
480 480 576 720 720 1080 1080 1080 1080 1080

Total number of lines 525 525 625 750 750 1125 1125 1125 1125 1125

https://manual-hub.com/

Specifications

TH-50VX100U

TH-65VX100U

Power Source

110 - 127 V AC, 50/60 Hz

Power Consumption Power on
Stand-by condition Power off condition Plasma Display panel

605 W Save OFF 0.9 W, Save ON 0.5 W
0.1 W Drive method : AC type 50-inch,
16:9 aspect ratio

755 W Save OFF 1.0 W, Save ON 0.5 W
0.2 W Drive method : AC type 65-inch,
16:9 aspect ratio

Screen size

43.5" (1,106 mm) (W) × 24.4" (622 mm) (H) × 49.9" (1,269 mm) (diagonal)

56.4" (1,434 mm) (W) × 31.7" (807 mm) (H) × 64.7" (1,646 mm) (diagonal)

(No.of pixels)

2,073,600 (1,920 (W) × 1,080 (H)) [5,760 × 1,080 dots]

Operating condition Temperature Humidity

32 °F - 104 °F (0 °C - 40 °C) 20 % - 80 %

Applicable signals Scanning format

525 (480) / 60i · 60p, 625 (575) / 50i · 50p, 750 (720) / 60p · 50p, 1125 (1080) / 60i · 60p · 50i · 50p · 24p · 25p · 30p · 24sF, 1250 (1080) / 50i

PC signals

VGA, SVGA, XGA, SXGA UXGA ···· (compressed)

Horizontal scanning frequency 15 - 110 kHz

Vertical scanning frequency 48 - 120 Hz

Connection terminals

HDMI A-B COMPONENT/RGB IN
PC IN

TYPE A Connector × 4

Y/G (RCA PIN JACK)

with sync 1.0 Vp-p (75 )

PB/B, PR/R (RCA PIN JACK)

0.7 Vp-p (75 )

AUDIO IN (RCA PIN JACK × 2)

0.5 Vrms

(HIGH-DENSITY MINI D-SUB 15PIN)

Y or G with sync 1.0 Vp-p (75 )

Y or G without sync 0.7 Vp-p (75 )

B/PB/CB : 0.7 Vp-p (75 ) R/PR/CR : 0.7 Vp-p (75 )
HD/VD: 1.0 - 5.0 Vp-p (high impedance)

AUDIO IN (M3 JACK)

0.5 Vrms

SERIAL Speaker terminal

EXTERNAL CONTROL TERMINAL (D-SUB 9PIN) RS-232C COMPATIBLE

6 , 16 W [8 W + 8 W] (10 % THD)

8 , 20 W [10 W + 10 W] (10 % THD)

Accessories Supplied Remote Control Transmitter Batteries Fixing band
Dimensions (W × H × D) Mass (weight)

N2QAYB000323

AA Size × 2

TMME203 × 1

47.7" (1,210 mm) × 28.5" (724 mm) × 3.7" (93 mm) 61.2" (1,554 mm) × 36.4" (924 mm) × 3.8" (94 mm)

approx. 81.6 lbs

approx. 152.2 lbs

Note: Design and specifications are subject to change without notice. Mass and dimensions shown are approximate.

https://manual-hub.com/

(for the U.S.A and Puerto Rico)

Panasonic Professional Display Company Unit of Panasonic Corporation of North America
One Panasonic Way 1F-10 Secaucus, NJ 07094

Panasonic Professional Flat Panel Display Limited Warranty

Panasonic Professional Display Company. (referred to as "the Warrantor") will repair this product and all included accessories with new or refurbished parts, free of charge in the USA or Puerto Rico, of the original purchase in the event of a defect in materials or workmanship as follows:

antenna, inadequate signal pickup, maladjustment of consumer controls, improper operation, power line surge, improper voltage supply, lighting damage, or service by anyone other than an authorized repair facility, or damage that is attributable to acts of God.

Models or Parts

Part Warranty

Labor Warranty

LIMITS AND EXCLUSIONS
There are no express warranties except as listed above.

Professional Flat Panel Display

2 Years

On-site or carry-in service in the USA and Puerto Rico may be obtained during the warranty period by contacting Panasonic Professional Display Company Service toll free at 1-800-973-4390.

THE WARRANTOR SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING, WITHOUT LIMITION, DAMAGE TO DISCS) RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF THE WARRANTY. ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR PARTICULAR PURPOSE, ARE LIMITED TO THE APPLICABLE WARRANTY PERIOD SET FORTH ABOVE.

This warranty is extended only to the original purchaser and is non transferable. A purchase receipt or other proof of date of original purchase will be required before warranty service is rendered.
This warranty only covers failures due to defects in materials or workmanship, which occur during normal use. The warranty does not cover damage which occur in shipment, or failures which are caused by products not supplied by the warrantor, or failures which result from improper installation, set-up adjustments, improper

Some states do not allow the exclusion or limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts, so the above exclusions or limitations may nor apply to you. This warranty gives you specific legal rights and you may other rights, which vary from state to state.
If you have a problem with this product that is not handled to your satisfaction, then write the Consumer Affairs Department at the Company address indicated above.

In the USA and Puerto Rico FOR SERVICE
CALL TOLL FREE 1-800-973-4390

https://manual-hub.com/

(for Canada)

Panasonic Canada Inc. 5770 Ambler Drive, Mississauga, Ontario L4W 2T3
LI M I T ED WARRAN T Y STAT EM EN T

Panasonic Canada Inc. (also known as PCI) warrants this product to be free of defects in material and workmanship under normal use during the applicable warranty coverage period described below. PCI agrees to repair, or at its option, exchange, any part that becomes defective. However, the product must be purchased and serviced in Canada. The product or part that shows evidence of defect must be delivered prepaid or carried in to an authorized Panasonic Broadcast Service Center. This warranty does not cover shipping costs.
The warranty coverage period is one year for both parts and labour beginning with the date of original end user purchase, subject to the exceptions as stated below. Repaired or replacement parts supplied during the warranty coverage period carry the unexpired portion of the original warranty coverage period. Proof of product purchase is a condition of warranty service. The owner must produce the product purchase receipt or other satisfactory evidence of date of original purchase.
This warranty does not apply to external appearance items, such as handles, knobs, safety windows, etc. This warranty does not apply to any part, or parts, of the product, installed, altered, repaired or misused in any way that, in the opinion of PCI, affects the reliability of or detracts from the performance of the product.
For products requiring routine preventive maintenance, that maintenance must be performed in order to maintain warranty coverage.
Serial numbers that have been altered, defaced or removed void this warranty. This warranty does not cover replacements or repairs necessitated by loss or damage resulting from any cause beyond the control of PCI.
Marking or retained images (sometimes called "burn-in") resulting from the display of fixed images on video display products are not defects and are not covered under this warranty.
THIS EXPRESS, LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT WILL PANASONIC CANADA INC. BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES.
In certain instances, some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, or the exclusion of implied warranties, so the above limitations and exclusions may not be applicable.

WARRANTY COVERAGE PERIOD EXCEPTIONS

Item

Parts

Video Tape

30 days--Replacement only (content not covered)

P2/SD Cards

(Content not covered)

Video Heads

1 year or 2,000 hrs. (prorated) Whichever comes first

D5 Video heads

1 year or 1,000 hrs. Whichever comes first

Maintenance Items

90 days

Colour Camera CCD Imaging Block

2 years

BT-H Series LCD Monitors 2 years

* DLPTM Projectors

3 years or 17,000 hrs. Whichever comes first

* LCD Projectors above 3 years or 2,500 hrs.

2,500 ANSI Lumens

Whichever comes first

* LCD Projectors below 2,500 ANSI Lumens

3 years or 1,500 hrs. Whichever comes first

Projector Lamps

50% of the rated lamp life or 1 year. Whichever comes first

103 inch Plasma displays 3 year (burn-in not covered)

Hard Drive Disk Unit

1 year plus balance (if any) of the original Manufacturer's Limited Warranty. (Content not covered)

Labour N/A
N/A 1 year or 2,000 hrs. Whichever comes first 1 year or 1,000 hrs. Whichever comes first 90 days 1 year
1 year 3 years or 17,000 hrs. Whichever comes first 3 years or 2,500 hrs. Whichever comes first. 3 years or 1,500 hrs. Whichever comes first 50% of the rated lamp life or 1 year. Whichever comes first. 3 year 1 year

· Dust, smoke, rental/staging environment and twenty-four/seven operation, dramatically decreases the interval between performances of routine preventive maintenance required to maintain this warranty coverage.
Warranty Service If the product needs to be shipped for service, carefully pack (preferably in the original carton) and enclose a letter, detailing the complaint. Send prepaid and adequately insured to the local authorized Panasonic Service Centre in your area or to Panasonic Technical Support and Product Services Department, 5770 Ambler Drive, Mississauga, Ontario, L4W 2T3. Shipping to the latter location requires a return authorization before shipment. No liability is assumed for loss or damage to the product while in transit.

https://manual-hub.com/

Customer's Record The model number and serial number of this product can be found on its back cover. You should note this serial number in the space provided below and retain this book, plus your purchase receipt, as a permanent record of your purchase to aid in identification in the event of theft or loss, and for Warranty Service purposes.

Model Number

Serial Number

Panasonic Professional Display Company Unit of Panasonic Corporation of North America
Executive Office : One Panasonic Way 1F-10, Secaucus, NJ 07094
EASTERN ZONE : One Panasonic Way 4E-7 Secaucus, NJ 07094 (201) 348-7621 Mid-Atlantic/New England : One Panasonic Way 4E-7 Secaucus, NJ 07094 (201) 348-7621 Southeast Region : 1225 Northbrook Parkway, Ste 1-160 Suwanee GA 30024 (770)338-6835 Central Region : 1707 N Randall Road E1-C-1, Elgin, IL 60123 (847)468-5200
WESTERN ZONE : 3330 Cahuenga Blvd W., Los Angeles, CA 90068 (323) 436-3500 Dallas Region : 6226 Abington Way, Houston, TX 77008 (713) 802-2726 No. CA/Northwest Region : 5870 Stone Ridge, #3, Pleasanton, CA (925) 416-5108
Government Marketing Department : 52 West Gude Drive, Rockville, MD 20850 (301) 738-3840
Panasonic Canada Inc. 5770 Ambler Drive Mississauga, Ontario L4W 2T3

Printed in Japan PBS1108S1128

https://manual-hub.com/

References

Manual-Hub.com - Free English product PDF Documents!