Accessories and Parts
The following accessories and parts are included for assembly:
Hexagon wrench Size 6
Hexagon wrench Size 4
Bolt: M6×16
Bolt: M8×20
Bolt: M8×45
U-shaped bolt: M8×50×80
Shim: M6
Shim: M8
Nut: M8
Square Nut: M8×25×25×5
Assembly Processes
Step 1: Assemble the connecting bracket
Attach the connecting bracket using 4 pieces of the U-shaped bolt (M8×80) and 8 pieces of the Nut (M8).
[Diagram Description] The diagram shows the initial assembly of the main frame. Two connecting brackets are positioned on the sides of a base structure. Four U-shaped bolts (M8x80) are inserted through designated holes in the base structure and the brackets. Eight M8 nuts are used to secure these bolts. Text labels confirm the part counts: "Bolt: M8×80 (2 PCS)" and "Nut: M8 (4 PCS)" are shown for each side.
Step 2: Assemble the frontpart bracket
Assemble the frontpart bracket on the left and right with 8 pieces of the bolt (M8×20), 8 pieces of the shim (M8), and 8 pieces of the nut (M8).
[Diagram Description] This step illustrates attaching the front support arms. Two front brackets are aligned with the main frame. Eight M8x20 bolts, each paired with an M8 shim, are inserted through the bracket holes and into the frame. Eight M8 nuts secure these bolts. Text labels indicate "Bolt: M8×20 (4 PCS)", "Shim: M8 (4 PCS)", and "Nut: M8 (4 PCS)" for each side.
Step 3: Assemble the anti-skid foot bolt
Assemble the anti-skid foot bolt (8 pcs) to the stand.
[Diagram Description] The diagram focuses on the underside of the assembled frame. Arrows point to eight locations where the anti-skid foot bolts (M8x20) are to be screwed into the bottom of the frame tubes. The label "Foot Bolt: M8×20 (8 PCS)" is visible.
Step 4: Assemble upper fixing bracket
Assemble the upper fixing bracket with 4 pieces of the bolt (M8×20), 4 pieces of the shim (M8), and 4 pieces of the nut (M8).
[Diagram Description] This step shows the attachment of upper support brackets. Two upper brackets are positioned. Four M8x20 bolts, each with an M8 shim, are used to attach each bracket to the frame. Four M8 nuts secure these bolts. Text labels confirm "Bolt: M8×20 (4 PCS)", "Shim: M8 (4 PCS)", and "Nut: M8 (4 PCS)".
Step 5: Assemble pedal connecting bracket
Assemble the pedal connecting bracket with 4 pieces of the bolt (M8×20), 4 pieces of the shim (M8), and 2 pieces of the Nut (M8).
[Diagram Description] The diagram depicts the assembly of the pedal support platform. A bracket is aligned with the main frame. Four M8x20 bolts, each with an M8 shim, are inserted. Two M8 nuts are used to secure these bolts. Text labels indicate "Bolt: M8×20 (4 PCS)", "Shim: M8 (4 PCS)", and "Nut: M8 (2 PCS)".
Step 6: Assemble Steering wheel connection bracket
Assemble the Steering wheel connection bracket with 4 pieces of the bolt (M8×20) and 4 pieces of the shim (M8).
[Diagram Description] This step shows the initial assembly of the steering wheel support column. A bracket is aligned with the main frame. Four M8x20 bolts, each with an M8 shim, are inserted to attach the bracket. Text labels confirm "Bolt: M8×20 (4 PCS)" and "Shim: M8 (4 PCS)".
Step 7: Assemble the steering wheel fixing bracket
Assemble the steering wheel fixing bracket with 4 pieces of the bolt (M8×20) and 4 pieces of the shim (M8).
[Diagram Description] The diagram illustrates the attachment of another component to the steering wheel support column. A bracket is aligned. Four M8x20 bolts, each with an M8 shim, are inserted to secure the bracket. Text labels confirm "Bolt: M8×20 (4 PCS)" and "Shim: M8 (4 PCS)".
Step 8: Assemble the elbow fixing stand and fixing plate
Assemble the elbow fixing stand and fixing plate on the left or right as desired to the Seat stand with 3 pieces of the bolt (M8×20), 3 pieces of the shim (M8), 2 pieces of the U-shaped bolt (M8×50×80), and 4 pieces of the Nut (M8).
[Diagram Description] This step shows the attachment of the main uprights (elbow fixing stand) and a plate to the seat base. Three M8x20 bolts, each with an M8 shim, are used along with two M8x50x80 U-shaped bolts. Four M8 nuts secure the U-shaped bolts. Text labels indicate "Bolt: M8×20 (3 PCS)", "Shim: M8 (3 PCS)", "U-shaped Bolt: M8×50×80 (2 PCS)", and "Nut: M8 (4 PCS)".
Step 9: Assemble the seat adjustment stand
Assemble the seat adjustment stand with 4 pieces of the bolt (M8×45), 4 pieces of the shim (M8), and 4 pieces of the square nut (M8×25×25×5).
[Diagram Description] The final assembly step shows the seat adjustment platform being attached to the main frame. Four M8x45 bolts, each with an M8 shim, are inserted. Four M8x25x25x5 square nuts secure these bolts. Text labels confirm "Bolt: M8×45 (4 PCS)", "Shim: M8 (4 PCS)", and "Square Nut: M8 (4 PCS)". Arrows indicate the direction of bolt insertion from the top and nut placement from the bottom.