User Guide for TROPHY RIDGE models including: AS713DL19, Digital React Sight, AS713DL19 Digital React Sight

Digital React QUICK START 4.25 X 7.5 3PIN

Jorge Aguilar

Digital React Trio - Quick Start

Product Manuals and Catalogs – Bear Archery

Download PDF

Trophy Ridge AS713DL19 Left-Handed Black Digital React Trio Pro Sight at Sutherlands

Trophy Ridge AS713DR19 Right-Handed Black Digital React Trio Pro Sight at Sutherlands

• Google Docs
• Google Drive
• Download [pdf]
• Download Optimized



File Info : application/pdf, 2 Pages, 3.43MB

Document Document

Sight in your vertical or bottom pin using the toolless micro adjust windage and elevation knobs at 40 yards.

50 50.
Once your bow is sighted in at 50 yards, press and hold SEL for 2 flashes, release and the screen will turn blue. See Detail F. Press SEL to increase the number or MD to decrease the number to adjust the sight reading to 50 yards.
Press and hold SEL for 2 flashes and the screen will turn grey. See Detail G. Your sight is now calibrated for all distances and is ready to use.

5

5

0

0

Screen will show 1ST. See Detail B. Press SEL. 20 yards will flash blue. Screen indicates the 20 yard setting. Use the SEL button to increase the number to 40.
50
50 50
50

4 0

40

40 40

Once you have sighted in the yardage markers from 40 ­ 100 you

can now go back and sight in the 20 and 30 yard horizontal pins.

Using the yardage selector knob roll the sight to its highest up

position. You will not use any windage or elevation knobs for this

step.

Do not adjust windage or elevation

5

Using an Allen wrench, insert it into the #1 micro adjust location on

0

the top of the sight hood and move the pin up or down into position

for 20 yards.

Once complete with the top pin adjust the second pin to 30 yards

with an Allen wrench, the same way you set the 20 yard pin

Once these last two pins are complete your sight is then sighted in.

Sight in your vertical or bottom pin using the toolless micro adjust windage and elevation knobs at 40 yards.

Once 1ST distance is set, you can now enter your bow and arrow speed, that was measured on the chronograph. Press MD until you see SPD. See Detail D. Press SEL. The number will be in blue and represents the speed of your bow in FPS. See Detail E.
Adjust the FPS with SEL to increase and MD to decrease the number until you see the correct speed.

If you see a number press and hold mode (MD) button until you see rEA. If at anytime you wish to start over, press and hold the MD button until you see rEA for React mode.
4 0

40 40

20 yards will flash blue. Screen indicates the 20 yard setting. Use the SEL button to increase the number to 40.
40

Once you have sighted in the yardage markers from 40 ­ 100 you can now go back and sight in the 20 and 30 yard horizontal pins. Using the yardage selector knob roll the sight to its highest up position. You will not use any windage or elevation knobs for this step. Do not adjust windage or elevation Using an Allen wrench, insert it into the #1 micro adjust location on the top of the sight hood and move the pin up or down into position for 20 yards Once complete with the top pin adjust the second pin to 30 yards with an Allen wrench, the same way you set the 20 yard pin Once these last two pins are complete your sight is then sighted in