Sena +Mesh

Using the Handlebar Mounting Kit

1. Place the handlebar mounting kit on the handle bar, wind the rubber band around the handle bar, and hang it on the hook.
2. Attach the handlebar mounting kit on the back of the main unit along the guide rail until you hear a click.

Placing on the Mounting Cradle

1. Locate a proper surface on your motorcycle body, clean the body surface location with a moistened towel, and allow to dry thoroughly.
2. Peel off the cover of the adhesive tape of the mounting cradle and attach the unit on the proper surface of your motorcycle.
3. Attach the mounting cradle on the back of the main unit along the guide rail until you hear a click.

Note: Make sure that the main unit sticks on your motorcycle body firmly. Maximum adhesion occurs after 24 hours.

Sena +Mesh App

You can use the Sena +Mesh App without pairing your Smartphone to the +Mesh.

• Download:
• Android: Google Play Store > Sena +Mesh App
• iOS: App Store > Sena +Mesh App

Running the Sena +Mesh App

1. Turn on the product.
2. Press and hold the Multi-function Button for 5 seconds to enter Bluetooth Pairing.
3. Launch the Sena +Mesh App on your Smartphone.
4. Scan the product in the app.
   • When you launch the app, the product is automatically scanned.
   • Tap the Scan icon [scan-icon] to manually scan the product.
5. After scanning is complete, select the scanned product in the app.

Note:

• If the product has not been scanned in the app, please update the product to the latest firmware.
• How to identify the scanned product in the app: You can identify the product by the six-letter code on the label on the back of your product. (Example: XXXX XXXXXX / XXXX XXXXX)

Sena Device Manager

The Sena Device Manager allows you to upgrade the firmware from your PC or Apple computer. Download the Sena Device Manager from sena.com.

Open Mesh

Open Mesh is an open group intercom function. Users can freely communicate with each other in the same Open Mesh channel and select which channel (1-9) to use through the Sena +Mesh App. It can connect with a virtually unlimited number of users in each channel.

Diagram: A network of 6 user nodes (labeled A through F), each with a headset icon, interconnected in a mesh topology.

Bluetooth Pairing with a Sena Headset or Helmet

1. Turn on the +Mesh and a headset that you would like to pair with each other.
2. Press and hold the Multi-function Button of the +Mesh for 5 seconds until the red LED of the +Mesh starts to flash rapidly. Enter into the Bluetooth intercom pairing mode of the headset (refer to the User's Manual for the headset you want to use). You do not need to press any buttons for pairing.
3. When the LED flashes green, the pairing is completed. You will hear "Mesh intercom on, Open Mesh, channel 1" from the connected corresponding headset.

Mesh Intercom On and Off

1. To start the Mesh Intercom, tap the Multi-function Button. The LED flashes green and you will hear "Mesh intercom on, Open Mesh, channel 1" from the connected corresponding headset.
2. To terminate the Mesh Intercom, tap the Multi-function Button. You will hear "Mesh Intercom Off" from the connected corresponding headset.

Mesh Intercom Reconnection

If Bluetooth connection between the +Mesh and a headset is disconnected, tap the Multi-function Button to reconnect the two devices.

Channel Setting (Default: channel 1)

• If the Open Mesh communication experiences interference because other groups are also using channel 1 (default), change the channel. You can select from channels 1 to 9.
• You can only change the channel through the Sena +Mesh App.