Instruction Manual for ACURITE models including: Multicolor LED Clock, Indoor Temperature and Data Clock, LED Clock with Indoor Temperature, 75160 LED Clock
possible product performance, please read this manual in its entirety and retain it for future reference. Unpacking Instructions Remove the protective film that is applied to the LED screen prior to using this product. Locate the tab and peel off to remove. Package Contents 1. Digital Clock 2. Power Adapter 3. Instruction Manual PRODUCT ...
PLEASE DISPOSE OF OLD OR DEFECTIVE BATTERIES IN AN ENVIRONMENTALLY SAFE WAY AND IN. ACCORDANCE WITH YOUR LOCAL LAWS AND REGULATIONS.
File Info : application/pdf, 8 Pages, 719.81KB
DocumentDocumentInstruction Manual 14.5" Multicolor LED Clock with Indoor Temperature and Date model 75160 CONTENTS Unpacking Instructions .....................2 Package Contents .............................2 Product Registration..........................2 Features & Benefits ...........................3 Clock Setup.......................................4 Set the Time & Date ..........................5 Care & Maintenance ........................6 Specifications .................................... 6 FCC Information ...............................6 Customer Support.............................7 Warranty........................................... 7 Questions? We're here to help! Visit us online at www.acurite.com/support SAVE THIS MANUAL FOR FUTURE REFERENCE. Congratulations on your new AcuRite product. To ensure the best possible product performance, please read this manual in its entirety and retain it for future reference. Unpacking Instructions Remove the protective film that is applied to the LED screen prior to using this product. Locate the tab and peel off to remove. Package Contents 1. Digital Clock 2. Power Adapter 3. Instruction Manual IMPORTANT PRODUCT MUST BE REGISTERED TO RECEIVE WARRANTY SERVICE PRODUCT REGISTRATION Register online to receive 1-year warranty protection www.acurite.com/product-registration 2 Features & Benefits 1 2 3 4 5 6 1. Clock 2. AM/PM Indicator 3. Indoor Temperature 4. Day of The Week 5. Date 6. Color Selection Button Press and release to cycle through available colors. Press and hold to turn on/off auto-cycle mode. 7. Integrated Keyholes For easy wall mounting. 8. Fold-Out Stand 9. Battery Compartment Cover 10. Power Adapter 11. Built-In Cord Storage Secures excess cord. 12. Battery Compartment 13. Button For setup preferences. 14. SET Button For setup preferences. 15. Button For setup preferences. 12 7 7 15 14 13 11 8 10 9 3 SETUP 1 Install or Replace Backup Batteries (Optional) 1. Remove the battery compartment cover. 2. Insert 2 x AA alkaline batteries into the battery compartment, as shown. Follow the polarity (+/-) diagram in the battery compartment. 3. Replace the battery cover. 2 Plug in Power Adapter Plug the power adapter into a power outlet. 1 Install Backup Batteries (Optional) 2 AA Batteries 2 Plug in Power Adapter IMPORTANT: Batteries are a backup power source to preserve records in the event of a power outage. Power adapter is required as the power source of this product. PLEASE DISPOSE OF OLD OR DEFECTIVE BATTERIES IN AN ENVIRONMENTALLY SAFE WAY AND IN ACCORDANCE WITH YOUR LOCAL LAWS AND REGULATIONS. BATTERY SAFETY: Clean the battery contacts and also those of the device prior to battery installation. Remove batteries from equipment which is not to be used for an extended period of time. Follow the polarity (+/-) diagram in the battery compartment. Promptly remove dead batteries from the device. Dispose of used batteries properly. Only batteries of the same or equivalent type as recommended are to be used. DO NOT incinerate used batteries. DO NOT dispose of batteries in fire, as batteries may explode or leak. DO NOT mix old and new batteries or types of batteries (alkaline/standard). DO NOT use rechargeable batteries. DO NOT recharge non-rechargeable batteries. DO NOT short-circuit the supply terminals. 4 Set the Time & Date Press and release the "SET" button, located on the back of the clock, to enter SET MODE. Once in SET MODE the preference you are currently setting will blink on the clock. To adjust the currently selected (flashing) item, press and release the " " or " " buttons (press and HOLD to fast adjust). To save your adjustments, press and release the "SET" button to adjust the next preference. The preference set order is as follows: AUTO DST (ON or OFF*) CLOCK HOUR CLOCK MINUTE CALENDAR MONTH CALENDAR DAY CALENDAR YEAR TEMPERATURE UNITS (ºF or ºC) You will automatically exit SET MODE if no buttons are pressed for 10 seconds. Enter SET MODE at any time by pressing AND HOLDING the "SET" button. *If you live in an area that observes daylight saving time, DST should be set to ON. Adjust the Backlight This clock's color display features 5 different lighting settings: 100%, 75%, 50%, 25%, and 10%. When the display is powered with the power adapter, the backlight remains on at 100% brightness by default. Manually adjust the backlight brightness by pressing and releasing the " " or " " buttons when not in SET MODE. Set the Color This clock's display features 6 different color settings. Choose between white, blue, violet, magenta, red, or green, or set to auto-cycle to fit your preference. In auto-cycle mode, the display automatically cycles through all available colors, changing every minute. Press and release the Color Selection button on the front of the display to select your desired color. Press and hold to turn on/off auto-cycle mode. 5 Care & Maintenance Clock Care Clean with a soft, damp cloth. Do not use caustic cleaners or abrasives. Keep away from dust, dirt and moisture. Clean ventilation ports regularly with a gentle puff of air. Specifications TEMPERATURE RANGE POWER 32ºF to 122ºF; 0ºC to 50ºC 9-ft. 9V, 1.0A power adapter (included) 2 x AA alkaline batteries (for backup; optional) FCC Information This device complies with part 15 of FCC rules. Operation is subject to the following two conditions: 1- This device may NOT cause harmful interference, and 2- This device must accept any interference received, including interference that may cause undesired operation. WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user authority to operate the equipment. This device complies with Industry Canada licence-exempt RSS standard(s). 6 Customer Support AcuRite customer support is committed to providing you with best-in-class service. For assistance, please have the model number of this product available and contact us in any of the following ways: Chat with our support team at www.acurite.com/support Email us at support@chaney-inst.com Installation Videos Instruction Manuals Replacement Parts Register your Product Support User Forum Submit Feedback & Ideas IMPORTANT PRODUCT MUST BE REGISTERED TO RECEIVE WARRANTY SERVICE PRODUCT REGISTRATION Register online to receive 1-year warranty protection www.acurite.com/product-registration Limited 1-Year Warranty AcuRite is a wholly owned subsidiary of Chaney Instrument We expressly disclaim all liability for special, consequential, or Company. For purchases of AcuRite products, AcuRite provides the incidental damages, whether arising in tort or by contract from any benefits and services set forth herein. breach of this warranty. Some states do not allow the exclusion or For purchases of Chaney products, Chaney provides the benefits and services set forth herein. We warrant that all products we limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. manufacture under this warranty are of good material and We further disclaim liability from personal injury relating to workmanship and, when properly installed and operated, will be its products to the extent permitted by law. By acceptance of free of defects for a period of one year from the date of purchase. any of our products, the purchaser assumes all liability for the consequences arising from their use or misuse. No person, firm Any product which, under normal use and service, is proven to or corporation is authorized to bind us to any other obligation or breach the warranty contained herein within ONE YEAR from liability in connection with the sale of our products. Furthermore, date of sale will, upon examination by us, and at our sole option, no person, firm or corporation is authorized to modify or waive the be repaired or replaced by us. Transportation costs and charges terms of this warranty unless done in writing and signed by a duly for returned goods shall be paid for by the purchaser. We hereby authorized agent of ours. disclaim all responsibility for such transportation costs and charges. This warranty will not be breached, and we will give no credit for In no case shall our liability for any claim relating to our products, products which have received normal wear and tear not affecting your purchase or your use thereof, exceed the original purchase the functionality of the product, been damaged (including by acts price paid for the product. of nature), tampered, abused, improperly installed, or repaired or altered by others than our authorized representatives. Applicability of Policy Remedy for breach of this warranty is limited to repair or replacement of the defective item(s). If we determine that repair or replacement is not feasible, we may, at our option, refund the amount of the original purchase price. This Return, Refund, and Warranty Policy applies only to purchases made in the United States and Canada. For purchases made in a country other than the United States or Canada, please consult the policies applicable to the country in which you made your purchase. Additionally, this Policy applies only to the original THE ABOVE-DESCRIBED WARRANTY IS THE SOLE WARRANTY purchaser of our products. We do cannot and do not offer any FOR THE PRODUCTS AND IS EXPRESSLY IN LIEU OF ALL OTHER return, refund, or warranty services if you buy products used or WARRANTIES, EXPRESS OR IMPLIED. ALL OTHER WARRANTIES from resale sites such as eBay or Craigslist. OTHER THAN THE EXPRESS WARRANTY SET FORTH HEREIN ARE HEREBY EXPRESSLY DISCLAIMED, INCLUDING WITHOUT Governing Law LIMITATION THE IMPLIED WARRANTY OF MERCHANTABILITY This Return, Refund, and Warranty Policy is governed by the laws of AND THE IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR the United States and the State of Wisconsin. Any dispute relating to PURPOSE. this Policy shall be brought exclusively in the federal or State courts having jurisdiction in Walworth County, Wisconsin; and purchaser consents to jurisdiction within the State of Wisconsin. 7 www.AcuRite.com Printed in China 75160 INST 031021 © Chaney Instrument Co. All rights reserved. AcuRite is a registered trademark of the Chaney Instrument Co., Lake Geneva, WI 53147. All other trademarks and copyrights are the property of their respective owners. AcuRite uses patented technology. Visit www.acurite.com/patents for details.