Interface Features
- Retains the A/V-IN jack (if applicable)
- Provides A/V output to the factory installed rear seat overhead entertainment system *
- Designed for models that have a DVD player built into the factory radio
* Only applicable for models with a second row RSE
Interface Components
- AXRSEH-GL29 harness
Applications
Make | Model | Year |
---|---|---|
BUICK | Enclave | 2008-Up |
CADILLAC | Escalade | 2007-2011 |
Escalade ESV | 2007-2011 | |
Escalade EXT | 2007-2011 | |
SRX | 2007-2009 | |
CHEVROLET | Avalanche ▲ | 2007-2013 |
Equinox | 2007-2009 | |
Silverado 2500/3500 ▲ | 2014 | |
Silverado (new body) ▲ | 2007-2013 | |
Suburban ▲ | 2007-2014 | |
Tahoe ▲ | 2007-2014 | |
Traverse | 2009-Up | |
GMC | Acadia | 2007-2016 |
Acadia Limited | 2017 | |
Sierra 2500/3500 ▲ | 2014 | |
Sierra (new body) ▲ | 2007-2013 | |
Yukon/Yukon XL ▲ | 2007-2014 | |
HUMMER | H2 | 2008-2009 |
PONTIAC | Torrent | 2007-2009 |
SATURN | Outlook | 2007-2010 |
SUZUKI | XL-7 | 2007-2009 |
▲ For 2012-Up models with NAV use the AXRSEH-G2.
Tools Required
- Wire cutter
- Crimping tool
- Connectors (example: butt-connectors, bell caps, etc.)
Connections to be Made
- Connect the Black wire with a ring terminal to the chassis of the aftermarket radio.
- From the RCA jacks labeled “FROM REAR A/V INPUT” to the A/V input of the aftermarket radio:
- Connect the Yellow RCA jack to the video in.
- Connect the Red and White RCA jacks to the audio in.
- From the RCA jacks labeled “TO OVERHEAD SCREEN” to the A/V output of the aftermarket radio:
- Connect the Yellow RCA jack to the video out.
- Connect the Red and White RCA jacks to the audio out.
Installation
- Connect the AXRSEH-GL29 harness to the wiring harness in the vehicle located at the radio location.