Throwback Soundbeam LED Wireless Speaker

User Manual

Product Image

A tall, cylindrical speaker with a translucent top section that emits light, and a solid base. The speaker is gray and the light-emitting part is white. The model name 'SOUNDBEAM' is prominently displayed below 'THROWBACK'. The user manual title and model number 'TB-BTSPLN-GRN' are also visible.

Specifications

Interface: TYPE-C
Input Voltage: 5V/1A
LED Power: 4W (4X1W)
Bluetooth Name: TB-BTSPLN-GRN
Speaker Power: 5W
Response Frequency: 70Hz~18KHz
Bluetooth Version: 5.4
Bluetooth Distance: 10m
Battery Capacity: 1800mAH
Product Size: Ø88.5x240mm
Material: ABS+PC
Net Weight: 425g
Standard: GB7000.1 GB7000.204

Parts Description

Diagram showing the speaker with numbered parts:

① Handle
② Light cover
③ Speaker
④ Lights touch switch
⑤ Bottom anti-slip silicone
⑥ Charging inductor light
⑦ Operation Key
⑧ TYPE-C Charging port
⑨ TYPE-C Charging Cable

Charging

Connect the Type-C charging cable to the charging port of the speaker. Use a 5V/1A adapter for charging. The indicator light turns red while charging and turns green when fully charged. Charging time is approximately 2.5 to 3 hours. Music playback time is about 5 hours at 70% volume with the light off.

Night Light Function

Single click: Turn lights on/off.
Long press: Adjust the brightness of the lights.

Control Buttons

M (Power/Play/Pause/Sound Pickup):
- Long press: Turn on/off speaker.
- Single click: Play/pause music.
- Double click: TWS function.
- Single click (while light is on): Turn on/off sound pickup music rhythm light function.
- (Volume Down/Previous Song):
- Long press: Decrease volume.
- Single click: Play previous song.
+ (Volume Up/Next Song):
- Long press: Increase volume.
- Single click: Play next song.

Wireless Speaker Operation

Long press the power button to turn on the Bluetooth speaker. Search for 'TB-BTSPLN-GRN' and connect. The speaker will automatically turn off after 5 minutes if no Bluetooth connection is established.

TWS Function

To activate TWS (True Wireless Stereo), turn on two RGB lantern speakers. Double-click the power button on one speaker; you will hear a 'tong' sound. After 3 seconds, both speakers will emit a 'tong' sound, indicating TWS is active. Double-click again to disable TWS.

Notifications

Do not use non-nominal voltage for charging.
Keep battery products away from heat.
Please charge if the device has not been used for 3 months.

The BLUETOOTH® wordmark and logos are registered trademarks owned by Bluetooth® SIG, Inc. All product names, logos, and brands are property of their respective owners. THROWBACK© COPYRIGHT ALL RIGHTS RESERVED. THROWBACK is an innovative brand of Truststone Group LLC. No portion of this design may be reproduced without express written permission. Other trademarks and trade names are those of their respective owners. All rights reserved. Distributed by Truststone Group LLC. 1370 Broadway New York, NY 10018.

FCC Compliance

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

Regulatory Compliance Marks: FC, CE

	THROWBACK Alarm Clock, Radio & Wireless Speaker User Manual \| TB-ACAS User manual for the THROWBACK TB-ACAS alarm clock, radio, and wireless speaker. Includes instructions for time setting, alarm setup, FM radio operation, Bluetooth pairing, and product specifications.
	Throwback Twist N' Shout Vintage Wireless Speaker Operation Manual Operation manual for the Throwback Twist N' Shout vintage wireless speaker, detailing pairing instructions, safety guidelines, product diagrams, specifications, and internal battery care.
	THROWBACK Wireless Karaoke LED Mic TB-KMS19 Operation Manual Comprehensive operation manual for the THROWBACK Wireless Karaoke LED Mic TB-KMS19, covering features, safety instructions, charging, pairing, operation, specifications, and warranty information.
	THROWBACK TB-RET2 Bluetooth Speaker Operation Manual Operation manual for the THROWBACK TB-RET2 Bluetooth Speaker, detailing general operation, Bluetooth connection, FCC statement, and general specifications.