Owner's Manual for asa ELECTRONICS models including: VCMS14R, NTSC System, NTSC, VCMS14
VCMS14L - ASA Electronics
VCMS14L/R -Manual - V1.4 2022.02.24 NTSC SYSTEM VCMS14L/R VCMS14L/R Features: High Performance CMOS Sensor IR LED Low Light Enhancement Waterproof Compact Size Contents: Camera Bracket Hardware Kit Installation and Pin Out Waterproof Camera Connector Standard Cable Connector Arrow Locking Location Video From Camera 12V DC Ground/Shield Cable Connector End View Specifications Mounting Type Image Sensor Resolution Water Resistance View Angle Dimension Operation Temperature Weight External Type 1/3" CMOS Sensor 600TVL IP69K 125°(H), 111°(V), 153°(D) 58(W)*27(H)*33.5(D)mm 2.28(W)*1.1(H)*1.32(D)inch -20 ~ +70 Approx.0.3kg/0.66 Mounting Plate Method Direct Mount Method 0.75" Instruction: 1. Assemble camera onto mounting plate a. Remove 3M film from the mounting plate b. Passthrough the wire harness and position camera to mounting plate c. Mount the slotted washer on the back of the camera bracket according to the diagram, screw on the nut and tighten well with socket or wrench d. Fit the gasket on the back of the camera assembly 2. Pass CEC connector through 0.75" diameter hole in the vehicle body 3. Attach the camera assembly to the vehicle body using the included self tapping screws 0.75" Instruction: 1. Mount the slotted washer & screw the nut after the camera attached to vehicle body 2. Caulk around the perimeter of the camera after the camera attached to the vehicle body. Camera to bracket hardware Specifications Q'ty Self tapping screw 2 M5*16 Slotted Washer 1 3M Tape 1 Specifications Gasket Q'ty 1 Nut 1 Mounting Plate 1 Mounting Plate Hole Dimensions 1.32" UNIT: Inch 2.28"Corel PDF Engine Version 18.0.0.448 CorelDRAW X8