LTE CPE User Manual V1.0

1. Get to know your LTE Indoor CPE

This section describes the indicators and ports on the LTE Indoor CPE.

2. Application

The LTE CPE can connect to the internet via a base station and distribute the connection to various devices like tablet PCs, smartphones, and laptops via Wi-Fi or Ethernet.

Diagram Description: A diagram shows the CPE connected to a power adapter and an internet terminus. Devices like a tablet PC, smartphone, and laptop are shown connecting wirelessly or via Ethernet to the CPE.

3. Access to internet by Ethernet

Notice: Place the device on a stable surface.

1. Open the packing box and insert the power adapter into the power port of the CPE.
2. After powering on, all indicators will light up. The power indicator and WiFi indicator will remain steady.
3. Connect the WAN port to the Ethernet port. The WAN indicator will be steady and blink when data is being transmitted.
4. Connect the LAN port to an end device. The LAN indicator will be steady and blink when data is being transmitted. Alternatively, connect the end device via Wi-Fi; the WiFi indicator will blink when data is being transmitted.

Diagram Description: Illustrates connecting the CPE via Ethernet to a computer and wirelessly to a tablet PC and smartphone, all powered by a power adapter and connected to an internet terminus.

4. Access to internet through 4G network

Notice: Place the device on a stable surface.

1. Slide off the card slot cover and insert the standard Micro SIM card.
2. Open the packing box and insert the power adapter into the power port of the CPE.
3. After powering on, all indicators will light up. The power indicator and WiFi indicator will remain steady.
4. The 4G CPE will automatically dial-up. The 4G indicator will be steady, then blink, indicating a successful internet connection.

Diagram Description: Shows the CPE connecting to a base station for 4G network access, with devices like a tablet PC, smartphone, and laptop connecting to the CPE.

5. Set up a WiFi connection

1. Ensure the CPE is turned on and WiFi is operational.
2. Power on the end device to access its WiFi settings.
3. Select the CPE's SSID (found on the sticker on the CPE). The default SSID is typically '4G-CPE-XXXXXX' and the WiFi key is 'A1b2c3d4'.
4. Enter the WiFi password and click 'Connect'. The WiFi connection is successful when the WiFi indicator blinks.

The WiFi setting interface may differ across devices. Examples for iPhone, Android, and Windows 10 are provided.

Diagram Description: Screenshots show the WiFi connection process on iPhone, Android, and Windows 10 devices, including entering the password for the '4G-CPE-XXXXXX' network.

6. Login WEB UI

1. Ensure the 4G CPE is powered on and your computer or mobile phone is connected to it.
2. Open a web browser on your computer or mobile phone.
3. Enter the IP address 192.168.100.1 into the browser's address bar.
4. Enter the username 'admin' and password 'admin' in the prompt dialog box.
5. The main menu of the WEB UI allows access to CPE status, router settings, WiFi settings, firewall, SMS settings, system management, and more.
6. After completing settings, click 'Apply'. The device will restart automatically.

Diagram Description: A screenshot of the WEB UI shows the main dashboard with sections for Home, Statistics, SMS, Update, and Settings. It displays connection status, WLAN status, and received/sent data.

7. Faulty checking and Notices

Faulty checking:

• Power indicator is off: Check if the power adapter is properly plugged in.
• 4G indicator is off: Check if the SIM card is properly inserted.
• 3G/4G indicator doesn't blink:
  • If it's steady on within 3 minutes: It is searching for the internet.
  • If it's steady on for more than 3 minutes: It cannot connect to the internet. Try moving the CPE to another location.

Notices:

• Place the device on a stable surface.
• Ideal operating temperatures are 0°C to 40°C. Ideal storage temperatures are -20°C to +70°C. Extreme heat or cold can damage the device.
• Keep the device away from fire and water to prevent damage.
• Do not use the device during thunderstorms to protect against lightning damage.
• Do not bend or press the external antenna, as this may reduce communication quality. [!]

STATEMENT

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. To avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity to the antenna shall not be less than 20cm (8 inches) during normal operation.