Kogan Open Ear Headphones with Earhooks Wireless Earbuds

Operation

Multi-function Key

• Power On: Pick up the headphones to turn on automatically; the blue light flashes.
• Power Off: Place the headphones into the charging case.
• Play: Click the Function Button.
• Pause: Click the Function Button.
• Answer/End Call: Click the Function Button.
• Reject Incoming Call: Press and hold the Earphone Touch Button for 1 second when an incoming call is received.
• Volume Up/Down: Tap twice.
• Voice Control: Hold down for three seconds to activate Siri.

Earphone Identification: The image shows two earbuds, labeled 'L' for left and 'R' for right.

How To Pair the Headset?

1. Open the charging case and remove both earphones.
2. Remove the sticker before first use.
3. Wait for one earphone to remain on while the other turns off.
4. The LED indicator on the active earphone will slowly flash blue.
5. Ensure Bluetooth is enabled on your device.
6. Select 'TWS' from the list of available Bluetooth devices to complete pairing.

Charging

1. Connect the charging case to a USB power adaptor (not included) using the supplied charging cable.
2. Plug the charging cable into the USB-C port on the charging case.
3. Charge the case for at least 2 hours before first use.

• The charging case features low power consumption and will automatically power down when not in use to conserve energy.
• When earphones are placed inside the charging case, the case will automatically detect them and begin charging within approximately 10 seconds using a 5V power supply.

Charging Port: The image shows the charging case with a USB-C port indicated.

Specifications

Notes

This section is for user notes.