Vileda Windomatic Window Vacuum Cleaner

Important Safety Information

When using any electrical appliance, basic safety precautions should always be followed to reduce the risk of fire, electric shock, battery leakage, or personal injury. Always read all instructions before use.

• Never immerse the unit or charger in water or other liquids.
• Do not insert objects into air vents.
• This appliance can be used by children aged 8 years and above, and persons with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
• Check for signs of wear or damage before use and after any impact. Do not use if any part is damaged or defective.
• Only use replacement parts provided by Vileda.
• Never modify the product or charger.
• Only use the supplied charger. Do not attempt to use the charger with any other product, nor attempt to charge this product with another charger.
• Keep the charger cord away from hot surfaces and sharp edges.
• Do not handle the charger with wet hands.
• Do not store or charge the unit outdoors.
• For further help, technical advice, or to order spare or replacement parts, contact Vileda Customer Service (www.vileda.com).

Storage

• Store in an upright position.
• Store in a dry place.
• Store out of reach of children.
• Ensure the appliance is not plugged in during storage.
• Completely recharge the appliance before long periods of storage or after the last use.

Intended Use

• Use only as described in this manual.
• Use this battery-operated appliance only for cleaning moist, smooth surfaces such as windows, mirrors, or tiles.
• Do not use on rough surfaces.
• Use only with conventional window cleaners (no spirit, no cleaners that foam).
• Do not pick up anything that is flammable, burning, or smoking.

Getting Started

1. Remove all protection cartons.
2. When unpacking, ensure no accessories are missing or damaged. Contact the retailer if any damage is detected.
3. Attach the suction nozzle to the main unit until it snaps into place.
4. Charge the battery for 3.5 hours before first use.
5. After fully charging, the operating time is 40 minutes.
6. Ensure the wiping blades are free of dirt before use.

Instructions for Use

1. Apply a glass cleaner and clean the window thoroughly with a cloth or washer. For best results, start with a wet cloth/washer.
2. Switch on the Vileda Windomatic.
3. Apply light pressure to the device to press the blades against the surface. The correct angle will adjust automatically due to the flexible neck.
4. Slide the Windomatic from top to bottom or horizontally over the surface to vacuum up water and/or detergent.
5. For extra suction power, press the 'Max' button.
6. When vacuuming larger amounts of fluids from horizontal surfaces, place the nozzle on the surface and pull the Windomatic over the fluid. When finished, gently place the Windomatic in an upright position to allow water to go into the reservoir.

Cleaning the Appliance

Emptying the Water Reservoir

• Once the max. fill level (100ml mark) is reached, empty the reservoir. If the max. level is exceeded, water might get into the ventilation.
• If the appliance is used with its handle facing down (e.g., for skylights), empty the reservoir after each window.
• Turn off the appliance. Push down the release button of the water reservoir and take it out of the main unit.
• To open the reservoir, apply pressure on the imprinted fingerprints of the top unit and push to open. Do not pull the units apart to avoid spilling dirty water.
• Empty the tank.

Cleaning the Water Reservoir

• For hygienic reasons, empty and clean the reservoir after each use.
• After removing and opening the reservoir, remove the tube separator.
• Clean the inside and outside of the reservoir units under running water or with a damp cloth. Alternatively, the units can be washed in the dishwasher.
• Warning: All other components are NOT dishwasher safe.
• Connect the tube separator back to the bottom unit. Connect the top and bottom units together until in place. Connect the complete reservoir to the main unit until it audibly snaps into place.

Cleaning the Main Unit

• Turn off the appliance.
• The main unit and squeegee can be cleaned or wiped with a damp cloth.
• Warning: Do not use solvents or polishes to clean the outside of the unit.
• Warning: The main unit contains electrical components. Never immerse the unit in water, do not clean in a dishwasher or washing machine, and do not clean under running water.

Battery Charging & Recharging

• Charge the battery for 3.5 hours before first use. Switch off the unit before charging.
• Connect the supplied charger to the charging socket. Plug the charger into a suitable electrical socket.
• The light indicator turns RED when charging and GREEN when charging is complete.
• Unplug the charger by grasping the charger, not the cord.
• It takes approximately 3.5 hours to fully recharge the battery.
• If the appliance is connected to the charger while on, the motor will stop and the battery will charge.
• Warning: ONLY USE THE CHARGER PROVIDED WITH THE PRODUCT.
• To maintain peak battery performance, fully charge before long-term storage.
• For recharging, use only the detachable supply unit provided (YLS0041-E060065 or YLS0041-U60065 or SJB0600650GE or SJB0600650GB).

Light Indicator

• No Light (motor running): Appliance operating normally.
• Solid Red (while charging): Battery is charging.
• Slow Blinking Red (motor running): Weak battery (≤ 20% capacity).
• Solid Green (while charging): Battery is fully charged.
• Solid Red (motor stopped): Battery is flat.
• Fast Blinking Red (while charging): Damaged battery detected during charging.
• Fast Blinking Red (motor stopped): Over-current cut-off activated (e.g., vent is blocked).
• Slow Blinking Red (while charging): Wrong charger detected.

Troubleshooting

For further help, technical advice, or to order spare or replacement parts, contact your local Vileda Customer Services (www.vileda.com).

Technical Specifications

• Model No.: RV-1102
• Battery Type: 3.6 V / Li-Ion
• Charging Period: 3.5 hours
• Run Time: 40 min.
• Charger Output: 6V DC, 650mA
• Charger Input: 100-240V, 50/60 Hz, 300 mA
• Weight: Approx. 640 g (optional with small nozzle 605 g)
• Protection: IPX4 splash water protected.