Anko Wireless Charging Pad
User Manual
Model: 42967354
Features
Charge for any compatible wireless charging device such as Apple or Samsung smartphone.
Setup Instructions:
- Connect a USB power adapter (not included) to a socket. A 2A or above power adapter is required.
- Connect the USB-C cable to the USB-C port on the charging pad.
- The green LED indicator light will turn on, indicating standby mode.
- Place your wireless charging device on the wireless charging pad. The blue LED indicator light will turn on, and charging will begin.
- To achieve fast wireless charging, a Quick Charge 3.0 or higher power adapter will be required.
Diagram Description: The diagram shows a USB power adapter plugged into a wall socket, connected via a USB-C cable to the wireless charging pad. A smartphone is shown placed on the pad, with the blue LED indicator illuminated.
Indicator Light Identification:
Color of indicator | Working status |
---|---|
Off | No power connected |
Green | Standby mode & Fully charged (Android phone) |
Blue | Wireless Charging & Fully charged (iPhone) |
Blue Flashing (Error detected) |
|
Notes:
- 1. When an iPhone is fully charged, the LED will stay Blue.
- 2. When an Android phone is fully charged, the LED will change from blue to green.
Important Notes:
- Do not disassemble or throw into fire or water to avoid damage.
- Do not use the wireless charger in severely hot, humid, or corrosive environments to avoid circuit damage and leakage.
- Do not place the charger too close to magnetic stripe or chip cards (ID cards, credit cards, etc.) to avoid magnetic failure.
- Please keep a distance of at least 30cm between implantable medical devices (pacemakers, implantable cochlear, etc.) and the wireless charger to avoid potential interference.
- Ensure children do not play with the wireless charger as a toy.
- Some phone cases may affect charging performance. Ensure there is no metal object between your phone case and the charger, or try removing the case before charging.
Specification:
- Input: DC 5V, 2.0A, DC9V, 1.67A or DC12V, 1.5A
- Output: 10W max
- Charging distance: ≤10mm
- Diameter: 99 x 99 x 10 mm
12 Month Warranty
Thank you for your purchase from Kmart.
Kmart Australia Ltd warrants this new product to be free from defects in materials and workmanship for the period stated above, from the date of purchase, provided that the product is used in accordance with accompanying recommendations or instructions where provided. This warranty is in addition to your rights under the Australian Consumer Law.
Kmart will provide you with your choice of a refund, repair, or exchange (where possible) for this product if it becomes defective within the warranty period. Kmart will bear the reasonable expense of claiming the warranty. This warranty will no longer apply where the defect is a result of alteration, accident, misuse, abuse, or neglect.
Please retain your receipt as proof of purchase and contact Kmart Customer Service Centre on 1800 124 125 (Australia) or 0800 945 995 (New Zealand) or alternatively, via Customer Help at Kmart.com.au for any difficulties with your product. Warranty claims and claims for expenses incurred in returning this product can be addressed to our Customer Service Centre at 690 Springvale Rd, Mulgrave Vic 3170.
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
For New Zealand customers, this warranty is in addition to statutory rights observed under New Zealand legislation.