General Arrangement Views
This section details the overall physical layout and dimensions of the 300kVA CX Connect UPS system cabinet.
Front View
The front of the cabinet is a tall, rectangular enclosure measuring 1000mm wide by 2000mm high. It features a single door on the left side. Below the door, there is a compartment with ventilation slots. The cabinet is divided into two main sections: a "CX CONNECT CABLE COMPARTMENT" and a "CX CONNECT MCCB COMPARTMENT". The width is split into 425mm and 575mm sections.
Left Side View
The left side view shows the cabinet's dimensions as 2000mm high and 800mm deep.
Rear View
The rear of the cabinet is depicted, showing ventilation slots located at the top and bottom sections.
ISO View
An isometric (3D) perspective view of the cabinet, illustrating the front door, side panels, and top structure.
Top View
The top view reveals the cabinet's dimensions of 1000mm width and 800mm depth. It shows two distinct compartments on the top surface, likely for cable entry or ventilation purposes.
Internal Views (Without Front and Side Door)
These views provide a look at the internal configuration of the 300kVA CX Connect system, showing the placement of key electrical components.
Front View (Internal)
The internal front view displays the arrangement of components mounted vertically within the cabinet. Components are numbered 1 through 5. An arrow indicates a "Cable Connection to UPS" pointing towards these internal components.
Left Side View (Internal)
Shows the internal components from the left side perspective.
Rear View (Internal)
Depicts the internal components as seen from the rear.
Top View (Internal)
Illustrates the internal layout from the top perspective.
Component List
| Serial No | Description | MCCB/Switch Type |
|---|---|---|
| 1 | Rectifier Input Breaker (RIB) | Plug-in Type: NZMH3-A500-SVE +NZM3-XSVS / Fixed Type: NZMH3-A500 |
| 2 | Bypass Input Breaker (BIB) | Plug-in Type: NZMH3-4-A500-SVE + NZM3-4-XSVS |
| 3 | Maintenance Bypass Breaker (MBS) | Plug-in Type: NZMH3-4-A500-SVE + NZM3-4-XSVS |
| 4 | Maintenance Isolation Switch (MIS) | Fixed Type: N3-4-400 |
| 5 | Battery Switch |
Notes on Switching Capacity (Icu): N Type NZM3 MCCB has a capacity of 50 kA, while H Type NZM3 MCCB has a capacity of 100 kA.
Drawing Information
Manufacturer: Eaton Industries (Netherlands) B.V.
Product: 300 kVA CX CONNECT
Drawing Name: General Arrangement View (Page 1), Views Without Front and Side Door (Page 2)
Drawing Number: CX 01
Revision: A2
Scale: 1:10
Drawn By: Ravindra Padwal
Approved By: Tanmay Tamboli
Material Specification: Binding, with tolerances according to material specification. Non-toleranced dimensions: +/- 0.5mm.
Copyright: All rights reserved.
