CommScope | now meets nextWireless Support
Instruction Manual for COMMSCOPE models including: BHD-4MM, BHD-14, BHD-38, BHD-58, BHD-12S, BHD-12, BHD-78, BHD-114 - BHS-114, BHD-158 - BHS-158, BH Series Single and Double Block Hangers, BH Series, BH Series Block Hangers, Single and Double Block Hangers, Single Block Hangers, Double Block Hangers, Block Hangers, Block, Hangers
BHD-114 | CommScope
File Info : application/pdf, 1 Pages, 327.83KB
DocumentDocumentInstallation Instructions BH-Series Single and Double Block Hangers for Fiber, Power, Hybrid and Coaxial Assemblies Bulletin 7717392 Revision E Page 1 of 1 Description BH-series Blocks are designed to secure multiple runs of cable in bundled space saving configurations. Blocks can be mounted directly to existing tower members using single, double, triple, or quadruple stack hardware kits recommended at 3ft (0.9m) intervals. For additional details on spacing, you can reference the CommScope Hanger Spacing Guidelines. www.commscope.com/globalassets/digizuite/968475-7719798.pdf Block Part No. BHD-4MM BHD-14 BHD-38 BHD-58 BHD-12S BHD-12 BHD-78 BHD-114 / BHS-114 BHD-158 / BHS-158 Compatible Cable Diameter Range 5-7 mm 7-9 mm 10-12 mm 17.8-20.1 mm 13.5-15.5 mm 15.2-16.3 mm 27.7-28.2 mm 39.6-40.6 mm 49-51.1 mm 1-Stack Hardware Part No. 3/8" 243095-9 M10 243095-11 3/8" 243095-9 M10 243095-11 3/8" 243095-9 M10 243095-11 3/8" 243095-9 M10 243095-11 3/8" 243095-9 M10 243095-11 3/8" 243095-9 M10 243095-11 3/8" 243095-9 M10 243095-11 3/8" 243095-10 M10 243095-12 3/8" 243095-10 M10 243095-12 2-Stack Hardware Part No. 3/8" 243095-5 M10 243095-7 3/8" 243095-5 M10 243095-7 3/8" 243095-5 M10 243095-7 3/8" 243095-5 M10 243095-7 3/8" 243095-5 M10 243095-7 3/8" 243095-5 M10 243095-7 3/8" 243095-5 M10 243095-7 3/8" 243095-6 M10 243095-8 3/8" 243095-6 M10 243095-8 3-Stack Hardware Part No. 3/8" 243095-1 M10 243095-3 3/8" 243095-1 M10 243095-3 3/8" 243095-1 M10 243095-3 3/8" 243095-1 M10 243095-3 3/8" 243095-1 M10 243095-3 3/8" 243095-1 M10 243095-3 3/8" 243095-1 M10 243095-3 3/8" 243095-2 M10 243095-37 3/8" 243095-2 M10 243095-37 4-Stack Hardware Part No. 3/8" 243095-2 M10 243095-4 3/8" 243095-2 M10 243095-4 3/8" 243095-2 M10 243095-4 3/8" 243095-2 M10 243095-4 3/8" 243095-2 M10 243095-4 3/8" 243095-2 M10 243095-4 3/8" 243095-2 M10 243095-4 3/8" 243095-38 M10 243095-37 3/8" 243095-38 M10 243095-37 Flat washers between hangers Torque (2.2-3.0 ft-lb) 3 - 4 N·m CommScope 3642 E US Highway 70, Claremont, NC 28610 USA (828) 324-2200 (800) 982-1708 www.commscope.com Technical Support +1 888 297 6433, Option 3 (Toll Free US and Canada) +1 828 323 4220, Option 3 (local) https://www.commscope.com/wisupport (open a ticket) Notice: CommScope disclaims any liability or responsibility for the results of improper or unsafe installation, inspection, maintenance, or removal practices. Aviso: CommScope no acepta ninguna obligación ni responsabilidad como resultado de prácticas incorrectas o peligrosas de instalación, inspección, mantenimiento o retiro. Avis : CommScope décline toute responsabilité pour les conséquences de procédures d'installation, d'inspection, d'entretien ou de retrait incorrectes ou dangereuses. Hinweis: CommScope lehnt jede Haftung oder Verantwortung für Schäden ab, die aufgrund unsachgemäßer Installation, Überprüfung, Wartung oder Demontage auftreten. Atenção: A CommScope abdica do direito de toda responsabilidade pelos resultados de práticas inadequadas e sem segurança de instalação, inspeção, manutenção ou remoção. Avvertenza: CommScope declina eventuali responsabilità derivanti dell'esecuzione di procedure di installazione, ispezione, manutenzione e smontaggio improprie o poco sicure. © 2024 CommScope