MOMAX BS6 Magnetic Bluetooth Speaker

Product Specifications

• Model: BS6
• USB-C Input: 5V 350mA
• Capacity: 700mAh
• Charging time: ≤ 3 hours
• Working time: Up to 2 hours (100% Volume)
• Frequency Response: 120Hz – 20kHz
• Driver size: Φ40mm
• Output RMS: 3W
• Wireless connectivity: V5.3
• Effective range: ≤10m / TWS > 5m
• Material: ABS + Aluminum + Fabric
• Dimension: Φ60mm*H37.3mm
• Weight: 85g

Package Contents

• 1. Magnetic Bluetooth speaker
• 2. USB-A to USB-C Cable (30cm)
• 3. Magnetic patch and protective film
• 4. Instruction Manual and Warranty Card

Product Features and Operation

The MOMAX BS6 features a magnetic design for easy attachment and a compact form factor.

Key Components:

• Charging Indicator
• Microphone
• Touch Button
• Magnetic Patch
• LED Light Indicator
• USB-C Charging Port

Magnetic Sheet Installation Steps:

1. Tear off the anti-static film protective layer.
2. Stick it on the back of the phone case.
3. Smooth out the bubbles and ensure firm attachment.
4. Remove the magnetic sheet sticker and stick it on the protective film.

Note: Phones with native magnetic charging support may not require the magnetic sheet. Consult your phone brand for specific wireless charging position information.

Key Operations:

• Power on: Long press the bottom button for 2 seconds. A prompt tone will sound.
• Power off: Long press the bottom button for 2 seconds. A prompt tone will sound.
• BT Search Pairing: When powered on, the blue light flashes, entering pairing mode with a prompt tone. The speaker automatically searches for your device.
• Pairing Successful: When Bluetooth pairing is successful, the blue light stays on.
• TWS Dual speaker mode: Double-click the bottom button of the speaker. When pairing is complete, the speaker with the blue indicator light is the left channel, and the white indicator light is the right channel. The speakers will automatically reconnect to TWS and the phone on subsequent power-ons.
• Play/Pause Music: Short press the bottom button.
• Answer Incoming Call: Short press the bottom button.
• Reject Incoming Call: Long press the bottom button.
• End Call: Short press the bottom button while in a call. Music will resume playback.
• Clear Connection / Restore Factory Settings: Triple press the bottom button. This clears Bluetooth and TWS connections, resets volume, and initializes TWS and Bluetooth, entering pairing mode with a prompt tone.

LED Light Status:

• BT Search Pairing: Blue light flashes.
• Pairing Successful: Blue light stays on.
• TWS Pairing: Working indicator light flashes blue and white alternately.
• Charging: Red light stays on.
• Fully Charged: Green light next to the Type-C port stays on.
• Low Battery Alarm: A "Low Battery" prompt tone every 2 minutes. Red light flashes when battery is low (3.3V), and the device shuts down at 3.0V.

Safety Warnings

• Do not dismantle or modify the product.
• Do not store the product in wet conditions.
• Keep away from heat sources.
• Prevent liquids from entering the product's interface.
• Remove metallic or magnetic protective cases from your device when charging.
• The 1-VIBE GO may heat up during charging; this is normal. If it becomes excessively hot, remove it from the charger and allow it to cool.
• Avoid using bent or damaged USB cables.

Disposal of Electronic Products

• Do not dispose of the product as household waste.
• Dispose of electronic products according to local regulations.
• MOMAX encourages participation in electronics recycling programs.

Warranty Conditions

• MOMAX provides a 12-month free repair service for defects under normal use from the date of purchase.
• A valid warranty card and original purchase invoice are required for service.
• Warranty is void if the product is modified, misused, damaged by liquid, or affected by force majeure.
• Alterations to the warranty card are not permitted.
• Warranty terms are subject to change without prior notice.
• Retain proof of purchase for warranty service.
• Consult the dealer for product compatibility before purchase. Specifications are subject to change.
• Visit www.momax.net for the latest product information.

Customer Service

• Hong Kong and Macau: Unit A, 4/F., Cheung Lung Ind. Bldg., 10 Cheung Yee Street, Lai Chi Kok, Kowloon, Hong Kong. Hotline: 852-2402 3186, E-Mail: info@momax.net
• Mainland China: MOMAX Technology (Shenzhen) Co., Ltd., 4th Floor, Building A, Weiyulong Buji Factory, No. 2016 Xuegang Road, Gangtou Community, Bantian Street, Longgang District, Shenzhen City, Guangdong Province. Postal Code: 518000. National Service Hotline: 86-400-886-0010, E-Mail: info@momax.net.cn

FCC Caution

This device complies with part 15 of the FCC Rules. Operation is subject to two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna; Increase the separation between the equipment and receiver; Connect the equipment into an outlet on a circuit different from that to which the receiver is connected; Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement and can be used in portable exposure condition without restriction.