User Guide for ARAS SECURITY models including: E5FD3D1B1439, Koop uw Adapter Plate in White for Bullet, Koop uw Adapter Plate in White, Plate in White, Koop uw Adapter Plate, Adapter Plate, Plate
Koop uw Adapter plate in Black for Bullet | ARAS Security
Koop uw Adapter plate in White for Bullet | ARAS Security
ADAPTER PLATE Mounting guide Box contents Adapter plate RJ45 Cap Required: Cable grommet M4 x 10 mmL M4x 8 mmL · T20 screwdriver AVA-ADA-PLA-MG-01 · Drill and drill bit · Suitable fasteners for the wall or junction box · Suitable sealant Copyright © 2022, Ava Video Security. All rights reserved. Ava Bullet - Adapter Plate · Mounting guide | 2 / 5 Installing the adapter plate 1 Determine which hole pattern to use by measuring the threaded holes on your junction box. 2 Locate the corresponding pattern on the adapter plate and drill the holes. 3 To avoid junction box water ingress we recommend to apply sealant between the Adapter plate and the wall. Make sure the junction box can carry the weight of the installed camera. Wall mount is also supported, refer to the Datasheet for more information. AVA-ADA-PLA-MG-01 Copyright © 2022, Ava Video Security. All rights reserved. Ava Bullet - Adapter Plate · Mounting guide | 3 / 5 4 5 Remove pull-off tab 6 7 8 AVA-ADA-PLA-MG-01 Copyright © 2022, Ava Video Security. All rights reserved. Ava Bullet - Adapter Plate · Mounting guide | 4 / 5 9 Attach the adapter plate to the junction box or wall using suitable screws 10 Attach the Bullet wall bracket to the adapter plate using the supplied screws and washers. 11 Refer to the Bullet camera Mounting guide for the final installation steps. AVA-ADA-PLA-MG-01 Copyright © 2022, Ava Video Security. All rights reserved. Ava Bullet - Adapter Plate · Mounting guide | 5 / 5Adobe PDF Library 17.0 Adobe InDesign 18.0 (Macintosh)