Owner's Manual for HAISEN models including: XS-HD06R, XS-HD06R Remote Control for Bi-Level Microwave Motion Sensor, Remote Control for Bi-Level Microwave Motion Sensor, Bi-Level Microwave Motion Sensor, Microwave Motion Sensor, Motion Sensor, Sensor
Remote Control for Microwave Motion Sensors – Sunco Lighting
Model: XS-HD06R ON/OFF Auto Reset Scenes Start Memory Apply M H Mounting Height Send Detection range Daylight sensor Stand-by dimming Hold time CCT + Stand-by period - POWER Reserved Daylight Harvesting HD06R Test Electric Parameters Working Voltage: AAA battery *2pcs (2.2-3V) Screen OFF Duration: 60S Icon Flicking Duration: 5S S(start) button ON Duration: 10S M(Memory) button Flicking Duration: 3S Carrier Frequency: 38KHz±2KHz Operation Distance Max. 15M/49ft (3V) Emission Angle: <30 degree Standby Current: <1.2uA Working Current: <5mA Peak Current: <30mA Working Temp: -4°F ~ +140°F Storage Temp: -22°F ~ +185°F Dimensions 5.78" (147mm) 0.99" (25.2mm) 2.7" (68.8mm) User LCD Screen Display Detection Area Holdtime Standy Dim Level Standby Period Daylight Threshold Brightness CCT Selected AM means "Auto Mode", AM not showing means "manually control mode" Daylight Harvesting enabled or disabled "Start" or "Memory" scene parameters Reserved area for the future Mounting Height Sensor & Intelligent Control Briefing of Button Functions Buttons ON/OFF Auto Reset Function ON/OFF Auto Reset Function Programming Buttons Function Performance Turn ON or OFF light and keep the sensor in ON/OFF mode. Enter into SENSOR MODE and peform the last time setting. Go back to default program; Enter into SENSOR MODE and perform the default program. Keep favorable program(Detection area, holdtime, daylight threshold, standby Scenes Scenes dim level and standby period) into different scenes and apply them quickly. Press this button to start programming, S icon on LCD screen display started Start Start to blink; after programming press MEMORY button, S icon keeps being. Memory Memory Press this button to memorize program and saved it into SCENEs; after pressing it, M icon's bright then off after 3S. Press this button to send the program(detection area, holdtime, daylight threshold, Apply Apply standby dim level and standby period) and sensor works in SENSOR mode. Adjust detection area/sensitivity levels according to real installation M H Mounting Height situations, higher or lower. Memorize and send out the last time setting of individual parameters(detection area, Send Send holdtime, standby dim level, standby period, daylight threshold, power, CCT, Daylight Harvesting, ON/OFF, Auto, Reset, Mounting Height, test) Detection Area Adjust from detection area options 25%50%75% and 100%. Daylight Threshold Adjust from daylight threshold options, there are "---"(disable), 2lux, 10lux, 30lux, 50lux, 80lux, 120lux, 200lux, 250lux, 300lux, 350lux, 400lux, LEN(daylight learning). Standy Dim Level Adjust from standby dim levels, 10%, 20%, 30% and 50%. Holdtime Adjust from holdtime options: 5S, 30S, 1min, 3min, 5min, 10min, 20min and 30min. Standby Period Adjust from Standby Period options, 0S, 10S, 30S, 1min, 5min, 10min, 30min, 60min and "--" as infinite. (To work with CCT supported sensors)Adjust from CCT options, CCT CCT Selectable 2700K, 3500K, 4000K, 5000K, 5700K, 6500K. POWER Brightness Adjust brightness in both ON/OFF mode & SENSOR mode, minimum Adjustable 10%, max 100%, each pressing makes 5% change. Reserved Button This remote control works for the next years, we keep this reserved button for the future reference. Daylight Harvesting Daylight harvesting function enabled or disabled. Test Test Button Quick testing button for only 2S ON then OFF. Choose higher parameters. Tips: 1. Press POWER button then keep + + pressing + button get you directly to 100% - Choose lower parameters. Tips: 1. Press POWER button then keep - pressing - button get you directly to 10% Sensor & Intelligent ControlAdobe PDF library 15.00