Lionelo Bart Air Balance Bike

Contact & Producer Information

For any remarks or questions concerning the product, please contact: help@lionelo.com

Producer: BrandLine Group Sp. z o. o., ul. A. Kręglewskiego 1, 61-248 Poznań, Poland

Please read this manual before using the product to understand its functions and intended use. Keep this manual for future reference.

Important Safety Warnings

• The bike is intended for children aged above 2 years and weighing up to 30 kg.
• Bike intended for one person only.
• Bike must be assembled, disassembled, and adjusted by an adult only, away from children (risk of suffocation from small elements).
• Always wear protective equipment (helmet, guards) when using the product.
• Do not allow children to stand on the saddle or handlebar.
• Do not use the bike on sloping or uneven surfaces.
• Do not use the bike on public highways.
• Do not use the bike near potentially hazardous areas (e.g., swimming pools).
• The child using the bike must be supervised by an adult.
• The child using the bike must wear footwear.
• The product is devoid of a brake; use with caution.
• Use the product carefully; skills are necessary to prevent falls or collisions that could cause injury.
• Keep plastic packaging out of reach of children (suffocation risk).
• Before each use, check the bike for damage, loose connections, or missing components. Do not use if damaged or missing parts; contact the manufacturer's authorized service center.
• Keep the product away from fire.
• Do not drag the bike behind a car or other vehicle.
• Keep the product away from heat sources, high temperatures, hot surfaces, ignition sources, naked flame, oil, and sharp edges.
• Store the bike in a dry place.
• Do not use the product in unfavorable weather conditions (e.g., frost, rain, snow, black ice).

Product Description (Figure 1)

The balance bike consists of the following parts:

• 1. Handlebars grips
• 2. Handlebars with shank hole
• 3. Saddle
• 4. Front fork
• 5. Crossbar
• 6. Rear wheel
• 7. Front wheel
• 8. Wheel clamping ring
• 9. Saddle clamping ring

Diagram Description (Figure 1): This figure shows a side view of the Bart Air balance bike, with key components labeled with numbers 1 through 9.

How to Assemble

Assembly must be performed by an adult only.

1. Handlebars (Figure 2)

Diagram Description (Figure 2): This diagram illustrates the handlebar installation. It shows inserting a shank with a cap (marked B) into the handlebar hole, then inserting the handlebars into the front fork. It also indicates the depth marker (marked C) which should not be visible and must be inside the bike's crossbar.

Insert the shank with a cap (marked B) into the handlebar hole. Next, insert the handlebars into the front fork of the bike. Ensure the handlebars are properly fixed and the wheels are positioned forward (see Figure 2). Adjust the handlebar height to your child's height – the handlebars depth marker (marked C) must not be visible; it must be inside the bike's crossbar. Use the included Allen wrench to screw the shank into the handlebars until resistance is felt. After completion, verify the handlebars are securely mounted. If not, tighten the shank further for stability.

2. Saddle (Figure 3)

Diagram Description (Figure 3): This diagram shows the saddle installation. It depicts releasing a nut on the saddle clamping ring (9), inserting the saddle tube into the crossbar hole, and adjusting the saddle height using a depth marker (marked A) which must be inside the crossbar.

Release the nut on the saddle clamping ring (9). Insert the saddle tube into the saddle hole in the crossbar. Adjust the saddle height to your child's height – the saddle depth marker (marked A) must not be visible; it must be inside the crossbar. Tighten the nut on the saddle clamping ring (9) properly. After completion, ensure the saddle is securely fixed. If not, tighten the nut further to guarantee stability.

3. Wheels

Pay attention to the front wheel tread direction; it should match the rear wheel tread direction. Insert the wheel into the fork by sliding one end of the hub into the designated opening. Repeat for the other side. Avoid excessive tilting of the fork. Tighten the hub to the fork with screws. The grooved side of the washer should face the frame.

How to Use

Sit on the saddle, grip both handlebars firmly, and push off the ground alternately with your feet. Once you gain speed, lift your feet to ride freely. This method helps the child learn to balance. Turning is achieved by rotating the handlebars in the desired direction and balancing the body. To brake, touch the ground with your feet.

Maintenance and Cleaning

Clean the bike with a damp cloth and wipe it dry. Do not use caustic or abrasive cleaning agents.

Compliance

The product has been tested and complies with the following standards: EN 71-1:2014+A1:2018, EN 71-2:2020, EN 71-3:2019+A1:2021

Note: Pictures are for illustrative purposes only. The actual product appearance may differ from the images shown.

Video Manual

A video manual is available on YouTube. You can find it by searching for the product or visiting youtube.com/lionelo.

Warranty Information

Detailed warranty conditions are available on the website: www.lionelo.com

Thank you for purchasing our product.