Interface module, relay module, terminal block module, Fuse module, DIN Rail Mount module
User Manual for OONO models including: OONO, F-1021 series, 50 Amp, Forward, Reverse, Relay, Module
24V 50Amp Forward and Reverse Relay Module for Motor / Linear Actuator, Reversing Relay Module
File Info : application/pdf, 4 Pages, 399.30KB
DocumentDocumentOONO® CZH-LABS.com 50 Amp Forward & Reverse Relay Module Model: F-1021 series Features: Reversing relay module. Powers any reversing motor equipment, can be used for any application that requires the ability to reverse motion. Support Momentary-action(Self-resetting) switch and Alternate-action (Self-holding) switch. For Self-resetting switch, when the switch is pressed the motor operates, and when the switch is released the motor stops. High quality aluminum enclosure, thickness 1.5mm/0.06". Diameter M6 / 6mm threaded copper terminals for battery and load. Connect switch terminal block: pitch 5.0mm/0.197", wire size 26~12 AWG / 2.5mm square, stripping length 7mm/0.28", Metric M2.5 slotted screw. Power on indicating red LED. Forward and Reverse status indicating LED, forward status lighting red, reverse lighting green. Operating voltage: 10~15VDC or 20~30VDC, Rated current: 50 Amp. Specifications: Operating voltage Switch short current Switch disconnect voltage Load rated current Static current consumption Action Status: FWD Switch Disconnect Connect Disconnect Connect REV Switch Disconnect Disconnect Connect Connect 12V Version 24V Version 10 ~ 15V DC 20 ~ 30V DC 150mA @12V 75mA @24V = V+ 50A 0.5mA (for power on LED) M1 Voltage V+ V+ 0V 0V M2 Voltage V+ 0V V+ 0V Motor Status Stop Forward Reverse Stop Wiring diagram: For Momentary-action(Self-resetting) switch For Alternate-action(Self-holding) switch: Dimensions: