User Guide for Rogersound Labs models including: C34EMKII In-Ceiling Speaker, C34EMKII, In-Ceiling Speaker, Speaker
& Owner’s Manuals – Rogersound Labs
C34EMKII PRODUCT UDPATE (Shipped after 3/15/2024) RSL has updated the C34EMKII design to have the baffle separate from the mounting frame to allow for easier and more robust installation. The installer can now clearly see and avoid any possible interference when securing the mounting tabs. This ensures the most secure mounting and ideal orientation. There are (4) hex head screws included in the accessory bag with each speaker. Step 2a: Install and rotate mounting frame Step 2b: Mounting Frame Baffle Grille Step 2b: Step 1: Cutting the hole Use the Included carboard template to mark and cut the hole for in your drywall. Make sure to avoid obstructions (electrical, beams, ducting, etc...) View behind drywall Step 3: Install the baffle to mounting frame Rotate the mounting clamps inward so they can clear the opening when inserting. Rotate the mounting frame so this section and corresponding grille attachment magnet is oriented and closet to the listening position and then tighten the mounting screws. Note mounting clamps will rotate outward and clamp to drywall as the mounti ng screws are ti ghtened Using the included screws, tighten and secure the baffle to the mounting ring. Attach grille letting the magnets hold it in place.PDFium PDFium