Dylan Bed Assembly Instructions
Full/Queen/E.King Size
Modus Furniture International
Parts and Hardware Packing Configurations
Box #1
A. Headboard: 1 pc
Box #2
B. Footboard: 1 pc
Box #3
C. Side Rails: 2 pcs
D. Slat Roll: 1 set
E. Center Leg: 4 pcs
F. Center Slat Support: 1 pc
[Diagram showing assembled Dylan Bed]
Hardware Packed in Box #3
- 1. Allen Bolt Ø8x50mm: 8 pcs
- 2. Spring Washers M8xØ12x1.7: 8 pcs
- 3. Flat Washers M8xØ19x1.7: 8 pcs
- 4. Screw Ø4x30mm: 27 pcs
- 5. Allen Key M4 x 110: 1 pc
Assembly Steps
Step 1
Attach the side rails (C) to the headboard (A) using two Allen bolts (1), spring washers (2), and flat washers (3) per side. Do not tighten bolts completely.
[Diagram illustrating Step 1 with parts A, C, and hardware 1, 2, 3]
| No. | Picture | Size | Qty. |
|---|---|---|---|
| 1 | [Allen Bolt] | M8x50 | 4 |
| 2 | [Spring Washer] | M8xØ12xt1.7 | 4 |
| 3 | [Flat Washer] | M8xØ19xt1.7 | 4 |
Step 2
Attach the footboard (B) to the side rail assembly using two Allen bolts, spring washers, and flat washers. Tighten all four bolts and bolts from Step 1 completely using Allen key (5).
[Diagram illustrating Step 2 with parts B, C, and hardware 1, 2, 3, 5]
| No. | Picture | Size | Qty. |
|---|---|---|---|
| 1 | [Allen Bolt] | M8x50 | 4 |
| 2 | [Spring Washer] | M8xØ12xt1.7 | 4 |
| 3 | [Flat Washer] | M8xØ19xt1.7 | 4 |
Step 3
Attach the four center legs (E) to the center slat support (F).
[Diagram illustrating Step 3 with parts E, F]
Step 4
Attach the slats (D) to the bed and center slat support (F) using the provided wood screws (4). [Philips head screw driver not included].
[Diagram illustrating Step 4 with parts D, F and hardware 4]
| No. | Picture | Size | Qty. |
|---|---|---|---|
| 4 | [Wood Screw] | M4x30 | 27 |
