the Breville Home Connect™ app Start Guide

Manual Setup

1. Connect your mobile phone to the home Wi-Fi network.

   [Screenshot: Smartphone screen showing 'Online' status.]

2. Refer to information booklet for instructions on how to enable the Wi-Fi on your device. ℹ️
3. Log into the Breville Home Connect™ app to take you to the 'Home' page. Touch ‘Add Device' or +.

   [Screenshot: Breville Home Connect app 'Home' screen showing 'No devices' and an 'Add Device' button.]

Auto Scan

Note: Refer to information booklet for instructions on how to enable the Wi-Fi on your device.

1. Select 'Auto Scan', then touch 'Start Scanning'*.

   *The mobile device must have Wi-Fi and Bluetooth enabled.

   [Screenshot: Breville Home Connect app screen showing 'Add Manually' and 'Auto Scan' tabs. The 'Auto Scan' tab is active, with options to 'Enable Wi-Fi' and 'Enable Bluetooth', and a 'Start scanning' button.]

2. Enter the password*, then select 'Confirm'.

   [Screenshot: Breville Home Connect app screen showing network configuration options, including 'Configuring Wi-Fi' and 'Scan Bluetooth devi...'. It prompts the user to ensure the device is ready for network connection.]

Add Manually - First Attempt (EZ mode)

Note: The app will start in EZ mode by default. If this mode fails, follow the ‘AP mode' described on the next page.

1. Select 'Add Manually' and choose the specific product.

   [Screenshot: Breville Home Connect app screen showing product selection options: 'Air Purifier', 'Fan', 'Humidifier', 'Dehumidifier'.]

2. Touch and press the ⚙️ button on the control panel for five seconds until it flashes rapidly.

   Note: Refer to information booklet for instructions on how to enable the Wi-Fi on your device as some devices require pressing alternate or multiple buttons to enable.

   [Screenshot: Smartphone screen showing 'Enter Wi-Fi Password' with 2.4GHz and 5GHz options, and fields for 'Wi-Fi Name' and 'Password'.]

3. Choose a Wi-Fi network. Enter the password of the home Wi-Fi network, then select 'Confirm'.
4. Change the name by selecting ✏️. Select 'Done'.

   [Screenshot: Breville Home Connect app screen showing 'Added successfully' with a device named 'LAP508'. An option to edit the name is visible.]

Add Manually - Second Attempt (AP mode)

Note: If EZ mode fails and the device could not be added, the device can be added by creating an access point (AP mode).

1. If EZ mode failed to connect, follow the prompts in the app to automatically begin AP mode. To manually access AP mode, press ‘Net Pairing Mode’ in the top right corner, then select ‘AP mode’.
2. Touch and press the ⚙️ button on the control panel for five seconds until it flashes slowly.

   Note: Refer to information booklet for instructions on how to enable the Wi-Fi on your device as some devices require pressing alternate or multiple buttons to enable.

3. Connect mobile device to your home Wi-Fi network.

   [Screenshot: Smartphone screen showing 'Enter Wi-Fi Password' with 2.4GHz and 5GHz options, and fields for 'Wi-Fi Name' and 'Password'.]

   Note: A 2.4GHz Wi-Fi connection is required.

4. Select the hotspot beginning with ‘SL-Breville’.

   [Screenshot: Smartphone Wi-Fi settings screen showing available networks, including 'SL-BREVILLE-XXXX' and 'SmartLife-XXXX'.]

5. Return to the 'Network Configuration' page and it will begin to add the device.

   [Screenshot: Breville Home Connect app screen showing 'Connecting...' progress.]

6. Change the name by selecting ✏️. Select 'Done'.

   [Screenshot: Breville Home Connect app screen showing 'Added successfully' with a device named 'LAP508'.]

7. You can now start using the app to control your device.