iPega PG-9083S Red Bat Wireless Controller

Device Description

The iPega PG-9083S Red Bat is a wireless controller that supports Direct-Play and Connect & Play modes, eliminating the need for additional application installations. It is compatible with Android 6.0+ and iOS 11.0+ devices.

• Allows gaming on Android, iOS, Tablets, and Smart TVs.
• Can accommodate devices up to 280mm in size.
• Features an ergonomic and comfortable grip.

Note: Due to system variations, some phones (e.g., Media Tek platform) may not support the controller. The controller's functionality may be affected by game updates; the manufacturer is not responsible for issues arising from game code changes.

Button Functions

Diagram showing button layout: L1/L2, Left Joystick/L3, HOME, Directional Button, Mode Switch, LED1-LED2, SELECT, R1/R2, Right Joystick/R3, A/B/X/Y, LED3-LED4, START.

[Diagram of controller buttons]

Specifications

• Product Dimensions: L215.5*W127.9*H54.5 mm
• Product Weight: 232±5g
• Operating Voltage: DC 3.7V
• Operating Current: <15mA
• Static Current: <15uA
• Endurance: >15 hours
• Input Voltage/Current: DC 5V/500 mA
• Charging Time: ~3 hours
• BT 4.0 Transmission Range: ≤8M
• Battery Capacity: 380 mA
• Standby Time: up to 30 days

Direct Play - Android V3

Set the mode switch to " ". Press and hold the "HOME" button for 3 seconds to turn on the controller. LED1 will flash rapidly. Search for and connect to "PG-9083S". LED1 will remain solid after a successful connection. Subsequently, pressing "HOME" will automatically connect to the previously paired device.

[Diagram showing horizontal device usage with HOME button on the right and a note about resetting key settings]

Direct Play - iOS V3

Set the mode switch to " ". Press and hold the "HOME" button for 3 seconds to turn on the controller. LED2 will flash rapidly. Search for and connect to "PG-9083S". LED2 will remain solid after a successful connection. Subsequently, pressing "HOME" will automatically connect to the previously paired device.

Button Configuration (Android/iOS)

The default button layout is available on www.ipega.hk. To change button functions, download and install the "ShootingPlus V3" application from the App Store/Google Play. The application allows for button function customization. By default, the controller is optimized for "PUBG Mobile".

[Diagram showing a phone connected to the controller and an app interface for configuration]

Standard Android Mode

Set the mode switch to " ". Press and hold the "HOME" button for 3 seconds to turn on the controller. LED3 will flash rapidly. Search for and connect to "PG-9083S". LED3 will remain solid after a successful connection. Subsequently, pressing "HOME" will automatically connect to the previously paired device.

Charging/Sleep/Wake/Power Off

1. Charging Function:
   • If the battery power is low, LED4 will flash rapidly.
   • During charging, LED4 will flash slowly.
   • When fully charged, LED4 will remain solid.
2. Sleep/Wake/Power Off:
   • The controller will enter sleep mode if unused for 5 minutes.
   • Press "HOME" to reconnect.
   • Hold "HOME" for 5 seconds to turn off the device. The LED will extinguish.

Notes

• Do not store the device in wet or hot locations.
• Do not strike, drop, or puncture the device.
• The device has a built-in battery. Do not dispose of it with household waste.
• Do not charge the device near fire or other heat sources.
• Only professionals or authorized personnel should disassemble the device. Doing so will void the warranty.

Accessory List

• Controller
• User Manual
• Micro USB Cable