Appliance Installation Dimensions
Overall Dimensions
The appliance has the following approximate dimensions:
- Height: 33 7/8" - 35" (860-890 mm)
- Width: 23 7/8" (604 mm)
- Depth: 22 5/8" (574 mm)
The installation opening requires a width of 23 7/8" - 24" (605-610 mm) and a minimum depth of 33 7/8" (min. 860 mm).
Connection Points (Rear View)
All connections are located at the rear of the appliance.
- A: Front view (refer to overall dimensions)
- B: Drain hose connection
- C: Water inlet connection
- D: Drain connection
- E: Electrical connection
An extension for the drain hose is available as an accessory. A junction box for hard-wired connections is also available as an accessory.
Specific connection point dimensions are provided:
- Drain hose connection: 4 1/16" (102 mm) from the side
- Inlet connection: 4 1/4" (108 mm) from the side
- Drain connection: 2 1/8" (54 mm) from the side
- Electrical connection: 4 15/16" - 6 1/8" (125-155 mm) from the side
The total width for connections is approximately 55 1/8" (1400 mm) and the height is approximately 38 5/8" (980 mm).
Water Inlet Valve Specifications
The water inlet valve has a US size connection of G 3/4"-11.5.
Valve Details:
- Model/Part Number: VAB ZH09 V- 120/110
- Flow Rate: 2.5 L/Min
- Connection Thread: G 3/4"-11.5NH
- Inlet/Outlet Diameters: Ø10.5 ±0.2 mm and Ø12 ±0.2 mm
- Overall Height: 79±0.5 mm
- Electrical Connection: Black wire
- Filter included
The valve features a solenoid mechanism and a plastic inlet fitting.
