GODOX Photo Equipment Co.,Ltd.GODOX Photo Equipment Co.,Ltd.
Godox神牛 - 官方网站Declaration of Conformity-GODOX Photo Equipment Co.,Ltd.Continuous Light-GODOX Photo Equipment Co.,Ltd.
Instruction Manual for Godox models including: MG2400R, MG2400R K1, MG2400R K2, MG2400R Knowled Full Color LED Light, Knowled Full Color LED Light, Full Color LED Light, Color LED Light, LED Light
MG2400R-Product-GODOX Photo Equipment Co.,Ltd.
Apr 29, 2025 — 专业灯具，禁止儿童使用。当儿童靠近时，家长或陪护人必须密切监督，以免儿童因碰. 撞灯具或私用灯具造成人身伤害。 3. 本灯具并非普通照明灯具，不可用于普通照明，任何有 ...
File Info : application/pdf, 87 Pages, 12.83MB
DocumentDocument LED KNOWLED Full-color LED Light
Instruction Manual
V1.2 /Instruction Manual
V1.00 /Firmware
1. 2. 3. 4. LED 5. 6. 7. -20 40 8. 9. 10. 11. 12. 13. 14. 15. 16. 17.
01
18. ROHSCE FCC 19. 20. 21.
LED MG2400R 100V-240V IP54 4 1800K-10000K
:CMIIT ID: 25J44811A015
02
1.
2.
3. G
4. U
5.
6.
7.
8.
9.
10.
11. DC INPUT
12. USB-C
13. ACC
03
1. 2.DC OUTPUT 3. 4. 5.LED 6.MODE 7.MENU 8.LOCK 9.PRESET 10. 11.DMX OUT 12.DMX IN 13.USB-A 14.AC INPUT 15.LAN 16.
04
MG2400R
×1
U ×1
×1
×1
GR45 ×1
×1
×1
×1
×1
×1
×1
05
MG2400R K1
×1
U ×1
×1
×1
GR45 ×1
×1
×1
×1
×1
×1
×1
×1
×1 06
MG2400R K2
×1
U ×1
×1
×1
GR45 ×1
×1
×1
×1
×1
×1
×1
×1
07
U
1.
2. U
3.
08
U
1. U
2. U
/
09
/
10
11
DMX 1. DMX
LumenRadio CRMX TX DMX512
2. DMX
\¯ \¯ \¯
%\¯
DMX512
12
AC 100V-240V
AC 1 2 3 U
13
MODE
MODE
CCT
MODE CCT
0.0 100.0 1800K 10000K GM -100% +100%
0% 10000K
-80%
HSI
MODE HSI
0.0 100.0 0° 360° 0% 100%
14
RGBW MODE RGBW
0.0 100.0 0.0 100.0 0.0 100.0 0.0 100.0 0.0 100.0
GEL MODE GEL
0.0 100.0 R-GEL/L-GEL R-GEL COR./CAL./SPC./CINE. L-GEL COR./COLOR./600/ COS./700 3200K 5600K -10° 10° -20 20
X-Y MODE X-Y 0.0 100.0 X 0.0000 0.8500 Y 0.0000 0.8500 GamutRec.2020 DCI-P3Rec.709Black body
15
0
700 0
L-GEL 700 5600K 0%
FX MODE FX 14
1. 0.0 -100.0 / CCT/HSI / 1800K-10000K/0-360° / 1-100 /
2. 0.0 -100.0 / 1800K-10000K / /1-10 /2-20
3. 0.0 -100.0 / 30%-90% /1-100
16
4. 0.0 -100.0 / CCT/HSI / 1800K-10000K/0-360° 1-100
5. 0.0 -100.0 / CCT/HSI 1-100
6. 0.0 -100.0 / 1-100
7. 0.0 -100.0 / 1-100
8. 0.0 -100.0 / 1-100 1-100
17
9. 0.0 -100.0 / CCT/HSI / 1800K-10000K/0-360° / 1-100 1-100
10. 0.0 -100.0 / CCT/HSI / 1800K-10000K/0-360° 1-100
11. 0.0 -100.0 / + + + + + + + 1-5
12.SOS SOS 0.0 -100.0 / CCT/HSI / 1800K-10000K/0-360°
18
13. 0.0 -100.0 / 0%-100% 1-100 14. 0.0 -100.0 / 0%-100% 1-100
MODE 14
19
MENU MENU
1.DMX
DMX
V1.00
MG2400R
1 01
20
%\¯
%\ %\¯
AD < <ª AD <ª ;¯ <)V AD < <ª ¯° ;¯ <)V
%\¯
AD < <ª AD <ª ;¯ <)V AD < <ª ¯° ;¯ <)V %\ %\¯ %\ %\¯ %\¯ %\¯ %\¯ %\¯ %\¯ %\¯ %\¯ %\¯
DMX/RDM https://www.godox.com.cn/ DMX
21
2.CRMX CRMX
"Godox KNOWLED"app "Godox KNOWLED" app
CRMX BT CRMX
1. CRMX BT /iOS Godox TimoLink TRX 2. Godox TimoLink TRX CRMX DMX Godox TimoLink RX 3. "Godox KNOWLED"app
d
<ùVi¯
\¯
<ùT^dªV)% TimoLink TRX/RX
\¯ \¯
\¯ \¯ <ùVi¯
22
3. MAC
MAC: *** "Godox Light"app "Godox Light" app 1. app app 2.app V3.0
23
4.
DHCP 192 168 1 102 255 255 255 0
192 168 1 1
D~
%A~ ^ý ^ý %%%
%%%
%%%
%A~ % % D~ %A~D%%A~ ^ýD%% ^ýD%% %%%
%A~^ý^ý %%% %%%
%A~%A~ ^ý% ^ý% %%%
24
5.Art-Net & sACN
Art-Net & sACN
Art-Net&sACN
/Art-Net/sACN/
Art-Net Net Art-Net Sub-Net Art-Net Port Art-Net Universe sACN Universe
0-127 0-15 0-15 0-32767 1-63999
Art-Net&sACN Art-Net Art-Net sACN sACN Art-Net Art-Net Art-Net Art-Net Art-Net sACN
6.
25
7.
/ 10 -100 1. LOCK MODE 50% 2.
8.
/S / /
9.
/ /
26
10.
7.
/ /
/1-10
10
/
/
11.
7.
10
Rec.709 DCI-P3
Rec.709
DCI-P3
12.
/ / /
27
13. 10%-100%
14. / English
15.
28
1. https://www.godox.com.cn/firmware-continuous-light U 2. U USB-A 3. 4.
1. U BIN 2.USB-A 5V 1.5A USB
1. https://www.godox.com.cn G3 .bin 2. USB-C USB 3. G3 "" .bin
16.
/ English 100
29
17.
MG2400R 085500000001
LOCK LOCK
MG2400R 085500000001
PRESET 1-20
1. MODE
2. PRESET 1 1
3. / / /
7. 1 2 3 4
30
1800K
GR15(15° ) GR30(30° ) GR45(45° ) GR60(60° ) GF14( ) GF14( )
2800K
GR15(15° ) GR30(30° ) GR45(45° ) GR60(60° ) GF14( ) GF14( )
3200K
GR15(15° ) GR30(30° ) GR45(45° ) GR60(60° ) GF14( ) GF14( )
lux fc
lux fc
lux fc
lux fc
lux fc
lux fc
lux fc
lux fc
lux fc
lux fc
lux fc
lux fc
lux fc
lux fc
lux fc
lux fc
lux fc
lux fc
lux fc
lux fc
lux fc
3m 3430 318 68700 6380 30700 2850 14400 1340 8680 806 36200 3360 13900 1290 8980 834 163000 15100 70000 6510 33300 3090 20600 1910 90200 8380 33900 3150 8950 831 164000 15200 70200 6520 34000 3160 20700 1920 90900 8450 34200 3180
5m 1500 139 22600 2100 10500 976 5230 486 3290 306 12800 1190 5330 495 3610 336 53600 4980 24400 2270 12400 1150 7930 737 31200 2900 13100 1220 3700 343 54200 5040 24500 2280 12500 1160 7940 738 31500 2930 13300 1240
10m 499 46 5390 501 2550 237 1410 131 998 93 2810 261 1420 132 1230 114 12800 1190 6290 584 3510 326 2370 221 6990 650 3610 336 1220 114 12900 1200 6330 588 3540 329 2390 222 7040 654 3640 338
31
4300K
GR15(15° ) GR30(30° ) GR45(45° ) GR60(60° ) GF14( ) GF14( )
5600K
GR15(15° ) GR30(30° ) GR45(45° ) GR60(60° ) GF14( ) GF14( )
6500K
GR15(15° ) GR30(30° ) GR45(45° ) GR60(60° ) GF14( ) GF14( )
lux fc
lux fc
lux fc
lux fc
lux fc
lux fc
lux fc
lux fc
lux fc
lux fc
lux fc
lux fc
lux fc
lux fc
lux fc
lux fc
lux fc
lux fc
lux fc
lux fc
lux fc
3m 8800 817 163000 15100 69400 6440 33300 3090 20300 1890 90000 8360 33600 3120 8470 787 158000 14700 67100 6230 32100 2980 19700 1830 87100 8090 32500 3020 8110 754 150000 13900 63800 5930 30500 2840 18500 1720 83300 7740 31000 2880
5m 3660 340 53400 4960 24100 2240 12300 1140 7820 726 31000 2880 13100 1210 3490 324 52000 4830 23400 2170 11900 1100 7550 702 29900 2780 12700 1180 3290 306 49400 4590 22200 2060 11300 1050 7180 667 28400 2640 12100 1130
10m 1190 111 12700 1180 6210 577 3490 324 2340 218 6900 641 3570 331 1150 107 12300 1140 6000 557 3370 313 2260 210 6660 619 3440 320 1090 101 11700 1080 5700 529 3200 297 2110 196 6320 587 3280 305
32
8500K
GR15(15° ) GR30(30° ) GR45(45° ) GR60(60° ) GF14( ) GF14( )
10000K
GR15(15° ) GR30(30° ) GR45(45° ) GR60(60° ) GF14( ) GF14( )
lux fc
lux fc
lux fc
lux fc
lux fc
lux fc
lux fc
lux fc
lux fc
lux fc
lux fc
lux fc
lux fc
lux fc
3m 8040 747 129000 12000 54700 5080 26100 2430 15900 1480 71000 6600 26500 2460 6530 607 123000 11400 52300 4860 25000 2320 15200 1410 67700 6290 25200 2350
5m 2840 264 42300 3930 19000 1770 9670 899 6100 567 24500 2270 10400 963 2700 251 40500 3760 18200 1690 9270 861 5850 544 23200 2160 9900 920
10m 925 86 9950 924 4860 452 2730 254 1820 169 5330 495 2780 259 882 82 9530 885 4660 432 2600 242 1720 160 5130 477 2660 247
33
R( )
GR15(15° ) GR30(30° ) GR45(45° ) GR60(60° ) GF14( ) GF14( )
G( )
GR15(15° ) GR30(30° ) GR45(45° ) GR60(60° ) GF14( ) GF14( )
B( )
GR15(15° ) GR30(30° ) GR45(45° ) GR60(60° ) GF14( ) GF14( )
lux fc
lux fc
lux fc
lux fc
lux fc
lux fc
lux fc
lux fc
lux fc
lux fc
lux fc
lux fc
lux fc
lux fc
lux fc
lux fc
lux fc
lux fc
lux fc
lux fc
lux fc
3m 1700 158 33700 3130 14400 1330 6660 619 4150 386 17600 1640 6810 633 2200 204 44300 4110 18900 1760 8960 832 5360 498 23900 2220 8850 823 823 77 15800 1470 6790 630 3210 298 1940 180 8670 805 3280 305
5m 718 67 10400 966 4600 427 2300 213 1460 136 5760 535 2340 218 916 85 14600 1360 6540 608 3300 306 2060 192 8170 759 3440 320 335 31 5230 486 2350 219 1180 109 742 69 2950 274 1280 119
10m 227 21 2480 230 1200 112 666 62 449 42 1280 119 666 62 293 27 3350 311 1630 151 906 84 598 56 1760 164 913 85 109 10 1190 110 584 54 321 30 215 20 637 59 338 31
34
1800K
GR15(15° ) GR30(30° ) GR45(45° ) GR60(60° ) GF14( ) GF14( )
2800K
GR15(15° ) GR30(30° ) GR45(45° ) GR60(60° ) GF14( ) GF14( )
3200K
GR15(15° ) GR30(30° ) GR45(45° ) GR60(60° ) GF14( ) GF14( )
lux fc
lux fc
lux fc
lux fc
lux fc
lux fc
lux fc
lux fc
lux fc
lux fc
lux fc
lux fc
lux fc
lux fc
lux fc
lux fc
lux fc
lux fc
lux fc
lux fc
lux fc
3m 4000 372 79500 7380 33900 3150 16300 1510 9740 905 43200 4010 15900 1470 10200 948 188000 17500 80300 7460 38600 3580 23600 2190 105000 9710 39100 3630 10300 956 189000 17600 80800 7510 38900 3610 23800 2210 106000 9810 39400 3660
5m 1730 161 25700 2380 11800 1100 5930 551 3740 347 14700 1360 6150 572 4270 397 61600 5720 27900 2590 14200 1320 9100 846 35900 3330 15200 1410 4310 400 62400 5800 28300 2630 14300 1330 9190 854 36300 3370 15400 1430
10m 576 54 6220 577 3010 279 1700 158 1120 104 3360 312 1710 159 1410 131 14800 1380 7220 671 4060 378 2710 252 8140 756 4190 389 1410 131 14900 1390 7260 674 4090 380 2740 255 8180 760 4220 392
35
4300K
GR15(15° ) GR30(30° ) GR45(45° ) GR60(60° ) GF14( ) GF14( )
5600K
GR15(15° ) GR30(30° ) GR45(45° ) GR60(60° ) GF14( ) GF14( )
6500K
GR15(15° ) GR30(30° ) GR45(45° ) GR60(60° ) GF14( ) GF14( )
lux fc
lux fc
lux fc
lux fc
lux fc
lux fc
lux fc
lux fc
lux fc
lux fc
lux fc
lux fc
lux fc
lux fc
lux fc
lux fc
lux fc
lux fc
lux fc
lux fc
lux fc
3m 10000 934 186000 17300 79600 7400 38200 3550 23300 2170 104000 9630 38700 3590 9480 881 176000 16300 74900 6960 35900 3330 21800 2030 97500 9060 36300 3380 8430 784 157000 14600 66800 6210 32000 2970 19500 1810 87200 8110 32400 3010
5m 4200 390 61300 5690 27700 2580 14100 1310 8970 833 35500 3300 15100 1400 3920 364 58600 5439 26000 2420 13200 1230 8430 783 33400 3100 14200 1320 3490 324 51700 4800 23300 2170 11900 1100 7530 700 29900 2770 12600 1170
10m 1380 128 14600 1360 7090 659 4000 372 2680 249 7990 742 4110 382 1270 118 13700 1270 6670 620 3730 347 2490 232 7450 692 3860 359 1130 105 12200 1130 5950 553 3320 308 2220 206 6630 616 3430 319
36
8500K
GR15(15° ) GR30(30° ) GR45(45° ) GR60(60° ) GF14( ) GF14( )
10000K
GR15(15° ) GR30(30° ) GR45(45° ) GR60(60° ) GF14( ) GF14( )
lux fc
lux fc
lux fc
lux fc
lux fc
lux fc
lux fc
lux fc
lux fc
lux fc
lux fc
lux fc
lux fc
lux fc
3m 7140 664 134000 12400 57300 5320 27300 2530 16600 1540 74100 6880 27500 2560 6770 629 128000 11900 54800 5090 26100 2420 15900 1470 71000 6590 26400 2450
5m 2940 273 44100 4100 19800 1840 10100 937 6390 594 25400 2360 10800 1000 2830 263 42200 3920 19000 1760 9650 987 6120 569 24200 2250 10300 960
10m 958 89 10400 965 5950 553 3320 309 1880 175 5610 521 2910 270 916 85 9950 924 4840 449 2690 250 1800 167 5350 497 2770 258
37
R( )
GR15(15° ) GR30(30° ) GR45(45° ) GR60(60° ) GF14( ) GF14( )
G( )
GR15(15° ) GR30(30° ) GR45(45° ) GR60(60° ) GF14( ) GF14( )
B( )
GR15(15° ) GR30(30° ) GR45(45° ) GR60(60° ) GF14( ) GF14( )
lux fc
lux fc
lux fc
lux fc
lux fc
lux fc
lux fc
lux fc
lux fc
lux fc
lux fc
lux fc
lux fc
lux fc
lux fc
lux fc
lux fc
lux fc
lux fc
lux fc
lux fc
3m 1700 158 33700 3130 14400 1330 6660 619 4150 386 17600 1640 6810 633 2200 204 44300 4110 18900 1760 8960 832 5360 498 23900 2220 8850 823 823 77 15800 1470 6790 630 3210 298 1940 180 8670 805 3280 305
5m 718 67 10400 966 4600 427 2300 213 1460 136 5760 535 2340 218 916 85 14600 1360 6540 608 3300 306 2060 192 8170 759 3440 320 335 31 5230 486 2350 219 1180 109 742 69 2950 274 1280 119
1. 100 2. GR15GR30GR60 GF14
10m 227 21 2480 230 1200 112 666 62 449 42 1280 119 666 62 293 27 3350 311 1630 151 906 84 598 56 1760 164 913 85 109 10 1190 110 584 54 321 30 215 20 637 59 338 31
38
GM FX CRI TLCI /
USB-A U
U
MG2400R 100V-240V~50/60Hz 26A 2650WMax. 1800K-10000K -100 100 0.0 100.0 /S / / 14 96 95 IP54 DMX 512 RDM /LumenRadio CRMX / Art-Net&sACN / APP / 60m /5V 1.5A -20 45 409mm*385mm*356mm 280mm*420mm*210mm 21kg 12kg
39
Safety Instructions and Attentions
First of all, as the most basic principle: This product is a professional lighting set equipment and should be used by professional lighting engineers or under the guidance of professionals. Basic safety attentions must always be followed during use, as follows:
1. Before use, please read and understand these instructions and attentions.
2. Professional lighting is prohibited for children. When children are near, parents or accompanying persons must supervise closely to prevent children from personal injury due to collision with lamps or private use of lamps.
3. This lighting product is not ordinary lighting product and cannot be used for general lighting. Anyone who has suffered eye damage or has sensitive eyes should avoid using this product.
4. When the lamp is on, it must be used with care. Do not touch high-temperature parts, such as LED lamp beads, to avoid burns.
5. When the lamp is on, it is forbidden to look directly at the lamp beads under any circumstances. Strong light should be used under the guidance of professional lighting engineers. Avoid prolonged exposure to strong light under any circumstances. If eye discomfort, please turn off the lamp in time, suspend use, and see a doctor immediately.
6. If the lamp bead is damaged or deformed by heat, stop using this equipment, and contact the manufacturer, service agent or qualified maintenance personnel to replace the lamp bead in time to avoid accidents.
7. This product is only suitable for use in -20 to 40 operating environment and normal humidity environment.
8. Do not use damaged equipment or accessories, and wait for professional maintenance personnel to check and repair to confirm being normal before use.
9. During using, if the casing of this product is broken due to being dropped, squeezed or subjected to strong impact, please do not use it, so as to avoid electric shock injury due to contact with internal electronic components.
10. If an extension cord is required, please use an extension cord with a current rating greater than or equal to that of the equipment. If an extension cord is rated less than the equipment, overheating may result.
11. Some products have long power cords, please place the power cords properly and keep them in a safe place. Avoid contacting the power cord with overheating surfaces, avoid improper placement that could cause pulling damage, or trip on-site personnel. Please use the certified power cord from the original manufacturer. If the product is damaged by using a non-certified power cord, it will not be repaired by our factory.
12. Be sure to unplug equipment from the power outlet before cleaning and repairing. When not in use, do not pull the power cord to unplug the equipment. For normal power-
40
off, please hold both ends of the plug of the equipment with your hands and pull the plug out of power outlet. This equipment needs to be connected to a grounded outlet. 13. Do not disassemble the product without permission. If the product fails, it must be checked and repaired by authorized maintenance personnel. 14. Before storing, make sure that the equipment has cooled down completely. For storage, unplug the power cord from the equipment. The equipment should be placed in the carrying case or in a ventilated dry place. 15. Do not place equipment near flammable and volatile solvents such as alcohol and gasoline. 16. Do not use accessories that are not recommended by our factory to avoid fire, electric shock or personal injury. 17. Please make sure to clean the glass of the lamp bead frequently and keep it clean, the glass may cause the glass to explode if it is adhered to mosquito carcasses or darkcoloured organic stains; when cleaning the device, please do not use a wet cloth to wipe, please use a dry, soft cloth to wipe the dirt on the device. 18. This product complies with ROHS, CE and FCC certification, please refer to the relevant national standards for use and operation. 19. The safety instructions are formulated according to the strict testing of the factory, and the design and specifications of the equipment are subject to change without prior notice. For latest product information, please check the GODOX website and view latest electronic instruction. 20. If it is found that the equipment is repaired without authorization, the one-year warranty period will be cancelled and relevant fees will be charged for maintenance. 21. Machine failures caused by non-standard operation are not covered by the warranty.
Do not stare at the operating light source
Foreword
Thank you for purchasing Godox's newly launched KNOWLED full-color LED light MG2400R has the following features: 100V-240V power supply supports global use, built-in full-color, thousand-bit adjustable brightness, IP54 dustproof and waterproof standard, four dimming curves, wide CCT ranges from 1800K to 10000K, and various controlling methods, suitable for large film studios, film and television shooting, broadcast studios, outdoor exteriors and large field scenes.
41
Names of Parts
Light Body
1. Mount Locking Pusher
2. Lamp Bead
3. Godox G Mount
4. U-type Bracket
5. Hanging Device
6. Direction Adjust Handle
7. Handle
8. Handle
9. Quick Install Device
10. Quick Install Device
11. DC INPUT Port
12. USB-C Port
13. ACC Port
42
Controller
1. Remove Controller Port 2. DC OUTPUT Port 3. Power Switch Button 4. Select Dial 5. LED Status Indicator 6. MODE Button 7. MENU Button 8. LOCK Button 9. PRESET Button 10. Display 11. DMX OUT Port 12. DMX IN Port 13. USB-A Port 14. AC INPUT Port 15. LAN Port 16. Quick Install Device
43
What's Inside MG2400R
Light Body × 1
U-type Bracket × 1
Controller × 1
Protection Cover × 1
Reflector GR45 × 1
Controller Mounting Device × 1
Tying Rope × 1
Safety Rope × 1
DC Power Cord × 1
AC Power Cord × 1
Instruction Manual ×1
44
What's Inside MG2400R K1
Light Body × 1
U-type Bracket × 1
Controller × 1
Protection Cover × 1
Reflector GR45 × 1
Controller Mounting Device × 1
Tying Rope × 1
Safety Rope × 1
DC Power Cord × 1
AC Power Cord × 1
Instruction Manual ×1
Storage Bag × 1
Storage Bag × 1
45
What's Inside MG2400R K2
Light Body × 1
U-type Bracket × 1
Controller × 1
Protection Cover × 1
Reflector GR45 × 1
Controller Mounting Device × 1
Tying Rope × 1
Safety Rope × 1
DC Power Cord × 1
AC Power Cord × 1
Instruction Manual ×1
Flight Case × 1
Note: Due to continuous updates and upgrades of the products, there may be differences between the actual products and the pictures. Therefore, the pictures are for reference only, products to prevail in kind.
46
Installation and Disassembly Install the U-type Bracket
1. Place the light on a flat surface, press down the quick install device button and remove the wrench.
2. Align both ends of the U-type bracket with the quick install device and insert in, lock the wrenches on both sides.
3. Install the light on the roller stand and lock the fixing knob on the roller stand.
Please be careful when installing the light as it is quite heavy and may cause personal injuries.
47
Disassemble the U-type Bracket
1. Hold the U-type bracket and remove it from the roller stand then place it on a flat surface.
2. Press and hold the quick install device button and release the wrench to remove the U-type bracket.
Install the Protection Cover/Reflector Align the protection cover or the reflector with the mount and rotate clockwise to install.
Install the Protection Cover
48
Install the Reflector
Disassemble the Protection Cover/Reflector
Press and hold the mount locking pusher and rotate counterclockwise to remove the protection cover or the reflector.
Disassemble the Protection Cover
Note: Please remove the protection cover first before turning the light on.
49
Disassemble the Reflector
Install the Controller onto the Light Stand Loosen the handle of controller mounting device and insert the light stand pole, rotate the handle clockwise to lock the mounting device, then align the quick install device with the slot of mounting device and insert it.
50
Connecting to DMX Controller 1. Wireless DMX Connection
LumenRadio CRMX TX
DMX512
\¯ \¯
\¯
2. Wired DMX Connection
Multi-connection
Multi-connection
%\¯
Note: The above pictures only show the method to connect the DMX512 controller, the controller and the connection cable are sold separately.
51
Power Supply
AC 100V-240V
AC Power Cord Instructions The No. 1 yellow wire is the earth wire, the No. 2 black wire is the neutral wire, and the No. 3 red wire is the live wire, please connect the plug according to the corresponding wire.
Please turn off the power when disassembling and installing the connection cable or power cord, it is strictly forbidden to plug and unplug when the power is on. Please press the latch button and rotate anticlockwise when disassembling the power cord with latch button. Coil the DC power cord when using, tie the tying rope through it then hang the end of the rope on the hanging device of the U-type bracket.
Power Switch
Press the power switch after connected to power source to turn on or off the device.
52
Mode Selection
Short press the MODE button to enter selection interface, rotate the select dial to select the desired mode, then press it to enter the corresponding parameter settings.
MODE
CCT Mode
Short press the MODE button to enter mode selection, rotate and press the select dial to select CCT mode, in which you can adjust the DIM/CCT/GM. Rotate the select dial clockwise to increase the parameters, while rotate anticlockwise to decrease the parameters.
DIM range: 0.0100.0 CCT range: 1800K10000K GM range: -100% +100%
HSI Mode
Short press the MODE button to enter mode selection, rotate and press the select dial to select HSI mode, in which you can adjust the DIM/HUE/SAT. Rotate the select dial clockwise to increase the parameters, while rotate anticlockwise to decrease the parameters.
DIM range: 0.0100.0 HUE range: 0° 360° SAT range: 0% 100%
DIM
0%
10000K
-80%
DIM
HUE
SAT
53
RGBW Mode
Short press the MODE button to enter
mode selection, rotate and press the
DIM
select dial to select RGBW mode, in which
you can adjust the DIM/red/green/blue/
white. Rotate the select dial clockwise
to increase the parameters, while rotate
anticlockwise to decrease the parameters.
DIM range: 0.0100.0 Red range: 0.0100.0 Green range: 0.0100.0 Blue range: 0.0100.0 White range: 0.0100.0
GEL Mode
Short press the MODE button to enter mode selection, rotate and press the select dial to select GEL mode, in which you can adjust the following parameters. Rotate the select dial clockwise to increase the parameters, while rotate anticlockwise to decrease the parameters.
DIM range: 0.0100.0 Gel type: R-GEL/L-GEL R-GELCOR./CAL./SPC./CINE. L-GELCOR./COLOR./600/COS./700 CCTrange: 3200K or 5600K HUE range: -10° 10° SAT range: -20 20
DIM
0
L-GEL 700
700 CCT 5600K
HUE
0 SAT
0%
54
X-Y Mode
Short press the MODE button to enter
mode selection, rotate and press the
DIM
select dial to select X-Y mode, in which
you can adjust the DIM/X coordinate/
Y coordinate/color temperature/color
space. Rotate the select dial clockwise
to increase the parameters, while rotate
anticlockwise to decrease the parameters.
DIM range: 0.0100.0 X coordinate0.0000 0.8500 Y coordinate0.0000 0.8500 color temperature or color space: Gamut, Rec.2020, DCI-P3, Rec.709, Black body
FX Mode
Short press the MODE button to enter mode selection, rotate and press the select dial to select FX mode, in which you can choose among the following 14 effects and adjust their respective parameters. Rotate the select dial clockwise to increase the parameters, while rotate anticlockwise to decrease the parameters.
;Ö
1. Flash This light effect simulates the flash of a camera flash or a traditional flash bulb, often used to create a lively and dynamic atmosphere. DIM: 0.0100.0 Switch: Turn on/off the effect Color: CCT/HSI CCT/HUE: 1800K-10000K/0-360° Trigger: Auto/Manual Speed: 1-100 Mode: Camera Flash/Flash Bulb
55
2. Lightning This effect simulates the natural thunder and lightning and is often used to create a tense, terrifying or mysterious atmosphere. DIM: 0.0100.0 Switch: Turn on/off the effect CCT: 1800K-10000K Trigger: Auto/Manual Times: Random/1-10 Frequency: Random /2-20
3. Cloudy This effect simulates the effect of cloud occlusion and is often used to create a gloomy, oppressive or sad atmosphere. DIM: 0.0100.0 Switch: Turn on/off the effect Ratio: 30 -90 Speed: Random/1-100
4. Broken Bulb This effect simulates the effect of a broken bulb and is often used to create a dim atmosphere. DIM: 0.0100.0 Switch: Turn on/off the effect Color: CCT/HSI CCT/HUE: 1800K-10000K/0-360° Speed: 1-100
5.TV This effect simulates the effect of light from a television or screen and is often used to create a cold, mechanical or digital atmosphere. DIM: 0.0100.0 Switch: Turn on/off the effect Color: CCT/HSI Speed: 1-100
56
6. Candle
This effect simulates the effect of light from a candle and is often used to create a soft, warm, shimmering atmosphere.
DIM: 0.0100.0 Switch: Turn on/off the effect Speed: 1-100
7. Fire
This effect simulates the effect of light from flame and is often used to create a bright, warm, shimmering atmosphere.
DIM: 0.0100.0 Switch: Turn on/off the effect Speed: 1-100
8. Firework
This effect simulates the effect of light from fireworks and is often used to create a gorgeous, colorful, romantic atmosphere.
DIM: 0.0100.0 Switch: Turn on/off the effect Embers: 1-100 Speed: 1-100
9. Explosion
This effect simulates the effect of light from explosion and is often used to create a bright, fierce, shimmering atmosphere.
DIM: 0.0100.0 Switch: Turn on/off the effect Color: CCT/HSI CCT/HUE: 1800K-10000K/0-360° Trigger: Auto/Manual Embers: 1-100 Speed: 1-100
10. Welding
This effect simulates the effect of light from welding and is often used to create a hot, mechanical atmosphere.
DIM: 0.0100.0 Switch: Turn on/off the effect Color: CCT/HSI CCT/HUE: 1800K-10000K/0-360° Speed: 1-100
57
11. Cop Car This effect simulates the effect of light from cop car and is often used to create a tension, chasing atmosphere. DIM: 0.0100.0 Switch: Turn on/off the effect Color: Red+Blue, Red, Blue, Blue+White, Blue+Yellow, Yellow, Red+White+Blue, Red+Yellow+Blue Mode: 1-5
12. SOS This effect simulates the flashing effect of an SOS signal and is often used to create a dangerous, distress or emergency atmosphere. DIM: 0.0100.0 Switch: Turn on/off the effect Color: CCT/HSI CCT/HUE: 1800K-10000K/0-360°
13. RGB Cycle This effect simulates the effect cycle and change of colorful lights and is often used to create a fantasy, sci-fi atmosphere. DIM: 0.0100.0 Switch: Turn on/off the effect SAT: 0%-100% Speed: 1-100
14. Party This effect simulates the effect of colorful lights, flashes and laser, and is often used to create a carnival, fun, high energetic atmosphere. DIM: 0.0100.0 Switch: Turn on/off the effect SAT: 0%-100% Speed: 1-100
Note: Please rotate the select dial to adjust the parameters, then press and rotate it to the next parameter. Select manual, the effect can be triggered once by pressing the select dial once. After a certain effect is set, press MODE button can return to the 14 effects interface.
58
MENU Settings
Press the MENU button to enter menu interface, rotate and press the select dial to enter the following setting options, press the MENU button can return to the MENU interface.
MENU
Optics Recognition Power Limit
Smoothing
Smooth
OFF
1. DMX
Short press the select dial to enter DMX interface, press and rotate the select dial to adjust the following settings.
MG2400R
Address
510
DMX Mode RDX State
01:CCT 8 Bit Off
DMX Lost
Hold Last Command
Termination
Off
Extend DMX Channels
Off
DMX Table
59
Level 1 Option Level 2 Option
Description
Address
001-512
Initial address
DMX Mode 01: CCT 8 Bit
CCT mode in 8bit
02: HSI 8 Bit
HSI mode in 8bit
03: RGB 8 Bit
RGB mode in 8bit
04: RGBW 8 Bit
RGBW mode in 8bit
05: CCT+HSI 8 Bit CCT+HSI mode in 8bit
06: CCT+RGBW 8 Bit CCT+RGBW mode in 8bit
07: FX 8 Bit
FX mode in 8bit
08: GEL 8 Bit
GEL mode in 8bit
09: CCT 16 Bit
CCT mode in 16bit
10: HSI 16 Bit
HSI mode in 16bit
11: RGB 16 Bit
RGB mode in 16bit
12: RGBW 16 Bit
RGBW mode in 16bit
13: X-Y 16 Bit
X-Y mode in 16bit
14: FX 16 Bit
FX mode in 16bit
15: GEL 16 Bit
GEL mode in 16bit
RDM State On
Turn on RDM, the controller can set the fixture address and DMX mode
Off
Turn off RDM
DMX Lost
Hold Last
After the DMX control signal is lost, continue to use the last received
Command
DMX control signal until power down or a valid DMX control signal is
received again.
Black Out
The light is off immediately.
Black Out After 2 After the DMX control signal is lost, continue to use the last received
Min.
DMX control signal for 2 minutes then black out.
Note: If a valid DMX control signal is received within 2 minutes, then use
the new DMX control signal.
Termination On
Turn on DMX terminal
Off
Turn off DMX terminal
Extend DMX On
Turn on extend DMX channels
Channels
Off
Turn off extend DMX channels
DMX Table Scan the QR code to check DMX table
Note: Please refer to the DMX mode specification to control the device by DMX/RDM. The electronic version can be downloaded from the official website https://www.godox.com.
60
2. CRMX
Short press the select dial to enter CRMX interface, press and rotate the select dial to turn on/off, or reset.
"Godox KNOWLED" app Downloading
Scan the QR code to download "Godox KNOWLED" app (Currently available for tablet download and use only).
CRMX BT to CRMX
1. First, connect the Android/iOS tablet to Godox TimoLink TRX via the CRMX BT module. 2. Then connect Godox TimoLink TRX to CRMX fixtures, or DMX fixtures (used with Godox TimoLink RX). 3. Finally, add the fixtures in "Godox KNOWLED" app to control them.
Android/iOS tablet
Godox TimoLink TRX
CRMX BT
"Godox KNOWLED" App Note: TimoLink TRX and TimoLink RX are sold separately.
Fixture with CRMX
CRMX
Fixture without CRMX CRMX need to be used with
Godox TimoLink RX
61
3. Bluetooth
Short press the select dial to enter Bluetooth interface, press and rotate the select dial to Bluetooth to turn it on or off. If you need to reset the Bluetooth, rotate the select dial to reset and press it to choose between apply and cancel. The MAC code is on the left corner for quick check.
Bluetooth Bluetooth Reset
MAC:***
"GODOX Light" app Downloading
Scan the QR code to download the "Godox Light" smartphone app (can be used in Android and iOS).
Note: 1. The app can be used directly on the firstly installed device (smartphone or tablet). When change to other mobile device (smartphone or tablet), the light shall be reset before the normal connection of the app. 2. The app should be version 3.0 or above.
4. Network Settings
Short press the select dial to enter network settings interface, press and rotate the select dial to adjust the parameters as follows.
xxx
Off Reset
62
Level 1 Option Level 2 Option
Network Mode DHCP
Art-Net2.x
Art-Net 10.x
Manual
IP
AAA.BBB.CCC.DDD
Subnet Mask 255.BBB.CCC.DDD
Gateway
AAA.BBB.CCC.DDD
Description DHCP mode To use 2.B.C.D network To use 10.B.C.D network Set the network IP, subnet mask, and default gateway manually The ID address is assigned by DHCP in DHCP mode. The ID address is 2.B.C.D in Art-Net 2.x mode. The ID address is 10.B.C.D in Art-Net 10.x mode. In manual mode: AAA0-255 BBB0-255 CCC0-255 DDD0-255 The subnet mask is 255.BBB.CCC.DDD and can not be adjusted by menu settings in DHCP/Art-Net 2.x/Art-Net 10.x mode. In manual mode: AAA0-255 BBB0-255 CCC0-255 DDD0-255 The gateway is assigned by DHCP in DHCP mode. The gateway is 2.B.C.D in Art-Net 2.x mode. The gateway is 10.B.C.D in Art-Net 10.x mode. In manual mode: AAA0-255 BBB0-255 CCC0-255 DDD0-255
5.Art-Net & sACN
Short press the select dial to enter Art-Net & sACN interface, press and rotate the select dial to adjust the parameters as follows.
Art-Net Universe
0
sACN Universe
1
63
Level 1 Option Art-Net&sACN
Art-Net Net Art-Net Sub-Net Art-Net Port Art-Net Universe sACN Universe
Level 2 Option Auto/Art-Net/sACN/Off
Description AutoArt-Net & sACN two protocols are accepted. Art-NetOnly Art-Net protocol. sACNOnly sACN protocol. OffNo network protocols are accepted.
0-127
Art-Net network
0-15
Choose Art-Net subnet in Art-Net network
0-15
Art-Net port
0-32767
Art-Net universe
1-63999
sACN universe
6. Optics Recognition Short press the select dial to enter optics recognition interface, press and rotate the select dial to turn on or off.
Note: The light will not be lightened if the optics is not correctly installed even optics recognition function is turned on.
Optics Recognition
Optics Recognition
On
7. Power Limit
Short press the select dial to enter power limit interface, press and rotate the select dial to turn on or off, and adjust the maximum limit.
Power Limit: On/Off Maximum Limit: 10%-100%
Note: 1.If the power supply is unable to meet the requirements for powering on, you can activate this function while the device is in powered-off state: simultaneously press the LOCK button and MODE button, it will automatically enter the power limit mode upon startup (default power limit is set to 50%).
2. Highspeed mode is unavailable if power limit is turned on.
64
Power Limit Power Limit
Maximum Limit
Off 100%
8. Dimming Curves
Short press the select dial to enter dimming curves interface, press and rotate the select dial to select among linear, S-curve, exponential and logarithmic.
9. Smoothing
Short press the select dial to enter smoothing setting interface. Rotate and short press the select dial to choose among default, smooth and off.
Smoothing
Default
Smooth
OFF
Smoothing Default Smooth Off
Note
The brightness data is basically smoothed to achieve smooth dimming and shorten the response time. The brightness data is smoothed to achieve ultra-smooth dimming with a slow response time. No smoothing of brightness data, fastest response time.
65
10. Control Mode
Short press the select dial to enter control mode interface. Rotate and short press the select dial choose the mode between normal, low end and highspeed, then short press and rotate the select dial can adjust the frequency of normal and low end modes from default or 1 to 11.
Control Mode Mode Frequency
Normal 10
Control Mode Suitable Environment Dimming Feature
Blink
Normal
Normal dimming
Proper in the whole dimming range Unlikely
Low End Highspeed
TV series/Movie Not dimmable
Proper in low dimming /
Probably No
11. Color Space
Short press the select dial to enter color space interface, press and rotate the select dial to choose among original gamut, correction gamut, Rec.709 and DCI-P3.
Color Space ColoOr Sripgacine al Gamut
Original Gamut
Correction Gamut
Rec. 709
DCI-P3
12. Fan
Short press the select dial to enter fan interface. Rotate and short press the select dial choose among off, auto, medium and high.
66
13. Display Short press the select dial to enter display interface, press and rotate the select dial to adjust the display brightness from 10% to 100%.
14. Language Short press the select dial to enter language interface, press and rotate the select dial to choose between simplified Chinese and English.
15. Version & Upgrade
Short press the select dial to enter version & upgrade interface to check the firmware version and upgrade instruction.
Insert the u disk with new firmware after power off, then reboot to upgrade the device.
V 1.00
Firmware Upgrade of the Controller 1. Download the new firmware to the U disk from official website (https://www.godox.com/firmware-continuous-light). 2. Turn off the device. Insert the U disk with new firmware into the USB-A port. 3. Turn on the device, and it will automatically enter the upgrading interface. 4. It will return to main interface after completion.
67
Notes: 1. New firmware must be downloaded from the official website, and keep only one BIN file in the root directory of the USB disk. 2. The USB-A port can only support output voltage and current of 5V 1.5A. Do not connect to over-rated USB device.
Firmware Upgrade of the Light Body
1. Download the firmware upgrade software G3 and the corresponding product firmware (.bin) from the official website (https://www.godox.com). 2. Connect the computer interface to the USB-C port of the light head via USB cable. 3. Open the G3 application, click `Open File' to open the .bin file, click upgrade, and wait for the upgrade to complete. Note: There is no need to connect to the controller when upgrading the light head.
16. Factory Reset Short press the select dial to enter factory reset interface to choose yes or no. If you choose yes, the device will automatically reset and reboot, then simplified Chinese and English options show on the display for your choice, after which the brightness will turn to 100% automatically.
17. Fixture Info
Short press the select dial to enter fixture info interface to check the detailed fixture information.
Fixture Info
Model: MG2400R UID: 085500000001 Firmware Version: V1.00 Temperature: 21
68
Lock Setting
Short press the LOCK button, the panel is locked when < > is displayed on the panel, press it again to unlock.
Note: The locking function only works on the controller panel, other operations are still available.
Preset Setting
Short press the PRESET button to enter preset effects interface. Rotate and press the select dial to choose and enter preset effects 1-20.
1. Short press the MODE button to enter the mode interface and set the desired parameters.
2. Short press the PRESET button to enter the preset interface, if you want to save this effect as preset 1, choose preset 1 and press the select dial to save.
3. You can apply, delete, save or cancel the preset groups by rotating and pressing the select dial.
P7r.eset
Preset 1 Preset 2
Preset 3 Preset 4
69
Illuminance Data (Normal Mode)
CCT
Testing Condition
Unit
Bare Light
lux
fc
With Reflector
lux
GR15 (15°)
fc
With Reflector
lux
GR30 (30°)
fc
1800K With Reflector
lux
GR45 (45°)
fc
With Reflector
lux
GR60 (60°)
fc
With Fresnel Lens
lux
GF14(spot)
fc
With Fresnel Lens
lux
GF14(flood)
fc
Bare Light
lux
fc
With Reflector
lux
GR15 (15°)
fc
With Reflector
lux
GR30 (30°)
fc
With Reflector
lux
2800K GR45 (45°)
fc
With Reflector
lux
GR60 (60°)
fc
With Fresnel Lens
lux
GF14(spot)
fc
With Fresnel Lens
lux
GF14(flood)
fc
Bare Light
lux
fc
With Reflector
lux
GR15 (15°)
fc
With Reflector
lux
GR30 (30°)
fc
With Reflector
lux
3200K GR45 (45°)
fc
With Reflector
lux
GR60 (60°)
fc
With Fresnel Lens
lux
GF14(spot)
fc
With Fresnel Lens
lux
GF14(flood)
fc
3m 3430 318 68700 6380 30700 2850 14400 1340 8680 806 36200 3360 13900 1290 8980 834 163000 15100 70000 6510 33300 3090 20600 1910 90200 8380 33900 3150 8950 831 164000 15200 70200 6520 34000 3160 20700 1920 90900 8450 34200 3180
5m 1500 139 22600 2100 10500 976 5230 486 3290 306 12800 1190 5330 495 3610 336 53600 4980 24400 2270 12400 1150 7930 737 31200 2900 13100 1220 3700 343 54200 5040 24500 2280 12500 1160 7940 738 31500 2930 13300 1240
10m 499 46 5390 501 2550 237 1410 131 998 93 2810 261 1420 132 1230 114 12800 1190 6290 584 3510 326 2370 221 6990 650 3610 336 1220 114 12900 1200 6330 588 3540 329 2390 222 7040 654 3640 338
70
CCT
Testing Condition
Unit
Bare Light
lux
fc
With Reflector
lux
GR15 (15°)
fc
With Reflector
lux
GR30 (30°)
fc
4300K With Reflector
lux
GR45 (45°)
fc
With Reflector
lux
GR60 (60°)
fc
With Fresnel Lens
lux
GF14(spot)
fc
With Fresnel Lens
lux
GF14(flood)
fc
Bare Light
lux
fc
With Reflector
lux
GR15 (15°)
fc
With Reflector
lux
GR30 (30°)
fc
With Reflector
lux
5600K GR45 (45°)
fc
With Reflector
lux
GR60 (60°)
fc
With Fresnel Lens
lux
GF14(spot)
fc
With Fresnel Lens
lux
GF14(flood)
fc
Bare Light
lux
fc
With Reflector
lux
GR15 (15°)
fc
With Reflector
lux
GR30 (30°)
fc
With Reflector
lux
6500K GR45 (45°)
fc
With Reflector
lux
GR60 (60°)
fc
With Fresnel Lens
lux
GF14(spot)
fc
With Fresnel Lens
lux
GF14(flood)
fc
3m 8800 817 163000 15100 69400 6440 33300 3090 20300 1890 90000 8360 33600 3120 8470 787 158000 14700 67100 6230 32100 2980 19700 1830 87100 8090 32500 3020 8110 754 150000 13900 63800 5930 30500 2840 18500 1720 83300 7740 31000 2880
5m 3660 340 53400 4960 24100 2240 12300 1140 7820 726 31000 2880 13100 1210 3490 324 52000 4830 23400 2170 11900 1100 7550 702 29900 2780 12700 1180 3290 306 49400 4590 22200 2060 11300 1050 7180 667 28400 2640 12100 1130
10m 1190 111 12700 1180 6210 577 3490 324 2340 218 6900 641 3570 331 1150 107 12300 1140 6000 557 3370 313 2260 210 6660 619 3440 320 1090 101 11700 1080 5700 529 3200 297 2110 196 6320 587 3280 305
71
CCT
Testing Condition
Unit
Bare Light
lux
fc
With Reflector
lux
GR15 (15°)
fc
With Reflector
lux
GR30 (30°)
fc
8500K With Reflector
lux
GR45 (45°)
fc
With Reflector
lux
GR60 (60°)
fc
With Fresnel Lens
lux
GF14(spot)
fc
With Fresnel Lens
lux
GF14(flood)
fc
Bare Light
lux
fc
With Reflector
lux
GR15 (15°)
fc
With Reflector
lux
GR30 (30°)
fc
With Reflector
lux
10000K GR45 (45°)
fc
With Reflector
lux
GR60 (60°)
fc
With Fresnel Lens
lux
GF14(spot)
fc
With Fresnel Lens
lux
GF14(flood)
fc
3m 8040 747 129000 12000 54700 5080 26100 2430 15900 1480 71000 6600 26500 2460 6530 607 123000 11400 52300 4860 25000 2320 15200 1410 67700 6290 25200 2350
5m 2840 264 42300 3930 19000 1770 9670 899 6100 567 24500 2270 10400 963 2700 251 40500 3760 18200 1690 9270 861 5850 544 23200 2160 9900 920
10m 925 86 9950 924 4860 452 2730 254 1820 169 5330 495 2780 259 882 82 9530 885 4660 432 2600 242 1720 160 5130 477 2660 247
72
CCT
Testing Condition Unit
Bare Light
lux
fc
With Reflector
lux
GR15 (15°)
fc
With Reflector
lux
GR30 (30°)
fc
R(Red) With Reflector
lux
GR45 (45°)
fc
With Reflector
lux
GR60 (60°)
fc
With Fresnel Lens lux
GF14(spot)
fc
With Fresnel Lens lux
GF14(flood)
fc
Bare Light
lux
fc
With Reflector
lux
GR15 (15°)
fc
With Reflector
lux
GR30 (30°)
fc
With Reflector
lux
G(Green) GR45 (45°)
fc
With Reflector
lux
GR60 (60°)
fc
With Fresnel Lens lux
GF14(spot)
fc
With Fresnel Lens lux
GF14(flood)
fc
Bare Light
lux
fc
With Reflector
lux
GR15 (15°)
fc
With Reflector
lux
GR30 (30°)
fc
With Reflector
lux
B(Blue) GR45 (45°)
fc
With Reflector
lux
GR60 (60°)
fc
With Fresnel Lens lux
GF14(spot)
fc
With Fresnel Lens lux
GF14(flood)
fc
3m 1700 158 33700 3130 14400 1330 6660 619 4150 386 17600 1640 6810 633 2200 204 44300 4110 18900 1760 8960 832 5360 498 23900 2220 8850 823 823 77 15800 1470 6790 630 3210 298 1940 180 8670 805 3280 305
5m 718 67 10400 966 4600 427 2300 213 1460 136 5760 535 2340 218 916 85 14600 1360 6540 608 3300 306 2060 192 8170 759 3440 320 335 31 5230 486 2350 219 1180 109 742 69 2950 274 1280 119
10m 227 21 2480 230 1200 112 666 62 449 42 1280 119 666 62 293 27 3350 311 1630 151 906 84 598 56 1760 164 913 85 109 10 1190 110 584 54 321 30 215 20 637 59 338 31
73
Illuminance Data (Highspeed Mode)
CCT
Testing Condition
Unit
Bare Light
lux
fc
With Reflector
lux
GR15 (15°)
fc
With Reflector
lux
GR30 (30°)
fc
1800K With Reflector
lux
GR45 (45°)
fc
With Reflector
lux
GR60 (60°)
fc
With Fresnel Lens
lux
GF14(spot)
fc
With Fresnel Lens
lux
GF14(flood)
fc
Bare Light
lux
fc
With Reflector
lux
GR15 (15°)
fc
With Reflector
lux
GR30 (30°)
fc
With Reflector
lux
2800K GR45 (45°)
fc
With Reflector
lux
GR60 (60°)
fc
With Fresnel Lens
lux
GF14(spot)
fc
With Fresnel Lens
lux
GF14(flood)
fc
Bare Light
lux
fc
With Reflector
lux
GR15 (15°)
fc
With Reflector
lux
GR30 (30°)
fc
With Reflector
lux
3200K GR45 (45°)
fc
With Reflector
lux
GR60 (60°)
fc
With Fresnel Lens
lux
GF14(spot)
fc
With Fresnel Lens
lux
GF14(flood)
fc
3m 4000 372 79500 7380 33900 3150 16300 1510 9740 905 43200 4010 15900 1470 10200 948 188000 17500 80300 7460 38600 3580 23600 2190 105000 9710 39100 3630 10300 956 189000 17600 80800 7510 38900 3610 23800 2210 106000 9810 39400 3660
5m 1730 161 25700 2380 11800 1100 5930 551 3740 347 14700 1360 6150 572 4270 397 61600 5720 27900 2590 14200 1320 9100 846 35900 3330 15200 1410 4310 400 62400 5800 28300 2630 14300 1330 9190 854 36300 3370 15400 1430
10m 576 54 6220 577 3010 279 1700 158 1120 104 3360 312 1710 159 1410 131 14800 1380 7220 671 4060 378 2710 252 8140 756 4190 389 1410 131 14900 1390 7260 674 4090 380 2740 255 8180 760 4220 392
74
CCT
Testing Condition
Unit
Bare Light
lux
fc
With Reflector
lux
GR15 (15°)
fc
With Reflector
lux
GR30 (30°)
fc
4300K With Reflector
lux
GR45 (45°)
fc
With Reflector
lux
GR60 (60°)
fc
With Fresnel Lens
lux
GF14(spot)
fc
With Fresnel Lens
lux
GF14(flood)
fc
Bare Light
lux
fc
With Reflector
lux
GR15 (15°)
fc
With Reflector
lux
GR30 (30°)
fc
With Reflector
lux
5600K GR45 (45°)
fc
With Reflector
lux
GR60 (60°)
fc
With Fresnel Lens
lux
GF14(spot)
fc
With Fresnel Lens
lux
GF14(flood)
fc
Bare Light
lux
fc
With Reflector
lux
GR15 (15°)
fc
With Reflector
lux
GR30 (30°)
fc
With Reflector
lux
6500K GR45 (45°)
fc
With Reflector
lux
GR60 (60°)
fc
With Fresnel Lens
lux
GF14(spot)
fc
With Fresnel Lens
lux
GF14(flood)
fc
3m 10000 934 186000 17300 79600 7400 38200 3550 23300 2170 104000 9630 38700 3590 9480 881 176000 16300 74900 6960 35900 3330 21800 2030 97500 9060 36300 3380 8430 784 157000 14600 66800 6210 32000 2970 19500 1810 87200 8110 32400 3010
5m 4200 390 61300 5690 27700 2580 14100 1310 8970 833 35500 3300 15100 1400 3920 364 58600 5439 26000 2420 13200 1230 8430 783 33400 3100 14200 1320 3490 324 51700 4800 23300 2170 11900 1100 7530 700 29900 2770 12600 1170
10m 1380 128 14600 1360 7090 659 4000 372 2680 249 7990 742 4110 382 1270 118 13700 1270 6670 620 3730 347 2490 232 7450 692 3860 359 1130 105 12200 1130 5950 553 3320 308 2220 206 6630 616 3430 319
75
CCT
Testing Condition
Unit
Bare Light
lux
fc
With Reflector
lux
GR15 (15°)
fc
With Reflector
lux
GR30 (30°)
fc
8500K With Reflector
lux
GR45 (45°)
fc
With Reflector
lux
GR60 (60°)
fc
With Fresnel Lens
lux
GF14(spot)
fc
With Fresnel Lens
lux
GF14(flood)
fc
Bare Light
lux
fc
With Reflector
lux
GR15 (15°)
fc
With Reflector
lux
GR30 (30°)
fc
With Reflector
lux
10000K GR45 (45°)
fc
With Reflector
lux
GR60 (60°)
fc
With Fresnel Lens
lux
GF14(spot)
fc
With Fresnel Lens
lux
GF14(flood)
fc
3m 7140 664 134000 12400 57300 5320 27300 2530 16600 1540 74100 6880 27500 2560 6770 629 128000 11900 54800 5090 26100 2420 15900 1470 71000 6590 26400 2450
5m 2940 273 44100 4100 19800 1840 10100 937 6390 594 25400 2360 10800 1000 2830 263 42200 3920 19000 1760 9650 987 6120 569 24200 2250 10300 960
10m 958 89 10400 965 5950 553 3320 309 1880 175 5610 521 2910 270 916 85 9950 924 4840 449 2690 250 1800 167 5350 497 2770 258
76
CCT
Testing Condition Unit
Bare Light
lux
fc
With Reflector
lux
GR15 (15°)
fc
With Reflector
lux
GR30 (30°)
fc
R(Red) With Reflector
lux
GR45 (45°)
fc
With Reflector
lux
GR60 (60°)
fc
With Fresnel Lens lux
GF14(spot)
fc
With Fresnel Lens lux
GF14(flood)
fc
Bare Light
lux
fc
With Reflector
lux
GR15 (15°)
fc
With Reflector
lux
GR30 (30°)
fc
With Reflector
lux
G(Green) GR45 (45°)
fc
With Reflector
lux
GR60 (60°)
fc
With Fresnel Lens lux
GF14(spot)
fc
With Fresnel Lens lux
GF14(flood)
fc
Bare Light
lux
fc
With Reflector
lux
GR15 (15°)
fc
With Reflector
lux
GR30 (30°)
fc
With Reflector
lux
B(Blue) GR45 (45°)
fc
With Reflector
lux
GR60 (60°)
fc
With Fresnel Lens lux
GF14(spot)
fc
With Fresnel Lens lux
GF14(flood)
fc
3m 1700 158 33700 3130 14400 1330 6660 619 4150 386 17600 1640 6810 633 2200 204 44300 4110 18900 1760 8960 832 5360 498 23900 2220 8850 823 823 77 15800 1470 6790 630 3210 298 1940 180 8670 805 3280 305
5m 718 67 10400 966 4600 427 2300 213 1460 136 5760 535 2340 218 916 85 14600 1360 6540 608 3300 306 2060 192 8170 759 3440 320 335 31 5230 486 2350 219 1180 109 742 69 2950 274 1280 119
10m 227 21 2480 230 1200 112 666 62 449 42 1280 119 666 62 293 27 3350 311 1630 151 906 84 598 56 1760 164 913 85 109 10 1190 110 584 54 321 30 215 20 637 59 338 31
Note: 1. All the data are average values instead of absolute values.All the above tests are based on the condition of 100% brightness. 2. Reflector GR15, GR30, GR60 and Fresnel lens GF14 are sold separately.
77
Technical Data
Model Power Supply Controller Input Power CCT GM Adjust Brightness Range Dimming Curves FX Mode CRI TLCI Light Body/Controller Protection Grade Controlling Methods
Bluetooth Controlling Distance USB-A Port Working Environment Temperature Dimension (without U-type bracket and reflector) Netweight (without U-type bracket and reflector)
MG2400R 100V-240V~50/60Hz 26A 2650WMax. 1800K-10000K -100 100 0.0 100.0 linear, S-curve, exponential, logarithmic 14 96 95 IP54
DMX 512 controllersupport RDM protocol/LumenRadio CRMX/Etherne/Art-Net&sACN protocol /Bluetooth app/ controller control 60m
Firmware Upgrade/5V 1.5A Power Supply -20 45
Light Body16.1"*15.16"*14.02" Controller11.02"*16.54"*8.27" Light Body21kg Controller12kg
Specifications and data may subject to changes without notice.
78
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition without restriction.
IC Warning
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement
Tout changement ou modification non expressément approuvé par la partie responsable de la réglementation de l'OCDE peut faire perdre à l'utilisateur le droit d'utiliser l'appareil.
Remarque: cet appareil a été testé pour répondre aux limites des appareils numériques de classe B conformément à la partie 15 des règles de la Federal Communications Commission des États - Unis. Ces limites sont conçues pour fournir une protection raisonnable contre les interférences nuisibles dans les installations résidentielles. L'appareil génère de l'énergie RF utilisée et rayonne, ce qui peut causer des interférences nocives pour les communications radio s'il n'est pas installé et utilisé conformément aux instructions. Cependant, aucun Garantie contre les interférences dans une installation spécifique. Si l'appareil cause des interférences nuisibles à la réception de la radio ou de la télévision, qui peuvent être déterminées en éteignant et en allumant l'appareil, l'utilisateur est encouragé à tenter de corriger les interférences par une ou plusieurs des mesures suivantes: - redirection ou repositionnement de l'antenne de réception. - augmenter l'espacement entre l'appareil et le récepteur. - Connecter l'appareil à une prise sur un circuit différent de celui auquel le récepteur est connecté. - consultez votre revendeur ou un technicien radio / tv expérimenté pour obtenir de l'aide. Avertissement RF pour les appareils portables: L'appareil a été évalué pour répondre aux exigences générales d'exposition aux radiofréquences. Équipement Peut être utilisé sans restriction dans des conditions d'exposition portables.
Warning
Operating frequency:2402MHz 2480MHzBT/2402MHz 2480MHzCRMX only receive Maximum EIRP Power: 1.21dBm(BT)
Declaration of Conformity GODOX Photo Equipment Co.,Ltd. hereby declares that this equipment are in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. In accordance with Article 10(2) and Article 10(10), this product is allowed to be used in all EU member states.For more information of DoC, Please click this web link: https://www.godox.com/eu-declaration-of-conformity/ The device complies with RF specifications when the device used at 0mm from your body.
( ) ( )
:
U
12
12
0755-29609320-8062
Warranty
Dear customers, as this warranty card is an important certificate to apply for our maintenance service, please fill in the following form in coordination with the seller and safe-keep it. Thank you!
Product Information
Model
Customer Information Seller Information Note
Name Address Name Contact Number Address Date of Sale
Product Code Number Contact Number
Note: This form shall be sealed by the seller.
Applicable Products
Applicable ProductsThe document applies to the products listed on the Product Maintenance lnformation (see below for further information). Other products or accessories (e.g. promotional items,giveaways and additional accessories attached,etc.) are not included in this warranty scope.
Warranty Period
The warranty period of products and accessories isimplemented according to the relevant Product Maintenance Information. The warranty period is calculated from the day(purchase date) when the product is bought for the first time,And the purchase date is considered as the date registered onthe warranty card when buying the product.
How to Get the Maintenance Service
If maintenance service is needed, you can directly contact the product distributor or authorized service institutions. You can also contact the Godox after-sale service call and we will offer you service. When applying for maintenance service, you should provide valid warranty card. If you cannot provide valid warranty card, we may offer you maintenance service once confirmed that the product or accessory is involved in the maintenance scope, but that shall not be considered as our obligation.
Inapplicable Cases
The guarantee and service offered by this document are not applicable in the following cases: The product or accessory has expired its warranty period; Breakage or damage caused by inappropriate usage, maintenance or preservation, such as improper packing, improper usage, improper plugging in/out external equipment, falling off or squeezing by external force, contacting or exposing to the improper temperature, solvent, acid, base, flooding and damp environments, etc; Breakage or damage caused by nonauthorized institution or staff in the process of installation, maintenance, alternation, addition and detachment; The original identifying information of product or accessory is modified, alternated, or removed; No valid warranty card; Breakage or damage caused by using illegally authorized, nonstandard or non-public released software; Breakage or damage caused by force majeure or accident; Breakage or damage that could not be attributed to the product itself. Once met these situations above, you should seek solutions from the related responsible parties and Godox assumes no responsibility. The damage caused by parts, accessories and software that beyond the warranty period or scope is not included in our maintenance scope. The normal discoloration, abrasion and consumption are not the breakage within the maintenance scope.
Maintenance and Service Support Information
The warranty period and service types of products are implemented according to the following Product Maintenance Information:
Product Type
Name
Parts
Controller internal components
Light body internal components
Maintenance Period(month) 12
12
Warranty Service Type
Customer sends the product to designated site
Customer sends the product to designated site
Accessories without electrical
Other Items
properties : Reflector, protection cover, U-bracket, locking device, cable,
No
package, etc.
Without warranty
Godox After-sale Service Call +86-755-29609320(8062)
Wechat Official Account 2 0755-296093208062 0755-25723423 godox@godox. com GODOX Photo Equipment Co., Ltd. Add.: Building 2, Yaochuan Industrial Zone, Tangwei Community, Fuhai Street, Bao'an District, Shenzhen 518103, China Tel: +86-755-29609320(8062) Fax: +86-755-25723423 E-mail: godox@godox.com www.godox.com Made in China | 705-MG24R0-01