Manual of T-1 Wireless Controller

1: Product Introduction

The T-1 wireless controller is a wireless handle designed for the P4 host. It is also compatible with the P5 host for playing P4 games, and supports P3, PC, NB, Android, and iOS. The controller features somatosensory, touch, dual-motor vibration, 12 adjustable LED lights, and a 3.5mm wired earphone interface.

The front and back of the handle are illustrated with the following labeled components:

• 1: HOME KEY
• 2: SHARE KEY
• 3: OPTION KEY
• 4: ACTION KEY
• 5: Direction key
• 6: Left joystick/L3 key
• 7: Right joystick/R3 key
• 8: L1 KEY
• 9: R1 KEY
• 10: TYPE C
• 11: LED adjustment key
• 12: R2 key
• 13: L2 KEY
• 14: Reset key
• 15: Speaker
• 16: Headphone
• 17: Touch
• 18: TP key

II: Product Features

1. Suitable for P4, P5 (for P4 games), P3, PC, NB, Android, and iOS.
2. Unique design with a sense of science and technology, offering a comfortable grip and button feel.
3. Equipped with a double motor vibration function.
4. Features a six-axis somatosensory function and touch function.
5. Equipped with 12 adjustable LED atmosphere lights: 4 LED grips, 4 LED 3D, and 4 LED touch pads, enhancing a futuristic look. Users can adjust the lights to match their preferences.
6. Includes an external speaker and a 3.5mm audio interface for wired headphones.
7. Can wake up the P4/P5 host with a single press of the HOME key.
8. Built-in 600mAh polymer battery provides approximately 8 hours of normal use and up to 30 days of standby time.
9. Bluetooth version: 2.1+EDR.

III: Connection Instructions

1: Connection with P4/P5 Host

First-time connection: Connect the controller to the host using a USB cable for pairing while the host is turned on. After successful pairing, you can disconnect the cable and use wireless Bluetooth connection by pressing the HOME button.

Subsequent connections: Simply press the HOME button to establish a Bluetooth connection.

Waking the host: If the host is in sleep mode, press the HOME button on the controller to wake it up.

2: Connect with P3 Host

Only wired mode is supported for P3 hosts. Insert the USB cable for connection; it is plug and play.

Note: The P3 host does not support touch or audio output functions.

3: Connect with NB and PC

3.1 Wired Mode: For computers without Bluetooth functionality, connect using a USB cable. For some WIN7 computers, additional equipment may be required. WIN8 and above systems support plug and play.

3.2 Wireless Mode:

1. Turn on the computer's Bluetooth and go to Bluetooth settings.
2. Select "Add Bluetooth devices."
3. While the handle is in standby, press and hold the SHARE + HOME keys simultaneously. The channel light will flash quickly, indicating pairing mode.
4. On the computer, "Wireless Controller" will appear. Click to pair.
5. Upon successful pairing, the handle's channel light will remain on. If pairing fails, the light will turn off.

Note: To play games on a computer with this controller, a game platform like STEAM is required. External headphone output is only supported in wired mode on the computer.

4: Connect with Android and iOS

1. Turn on Bluetooth on your device and go to Bluetooth settings.
2. Start searching for Bluetooth devices.
3. While the handle is in standby, press and hold the SHARE + HOME keys simultaneously. The channel light will flash quickly, indicating pairing mode.
4. On your phone, "Wireless Controller" will appear. Click to pair.
5. Upon successful pairing, the handle's channel light will remain on continuously. If pairing fails, the light will turn off.

Note: For mobile gaming, a game platform such as Chicken Simulator or Skylin Simulator is needed to support the controller's functionality.

5: Turning off the Handle

When connected, press and hold the HOME key for 10 seconds to turn off the controller.

6: LED Regulating Switch

This feature allows for three levels of atmosphere light adjustment:

1. Level 1: Ambient light is on.
2. Level 2: Motor vibration causes the ambient light to flash.
3. Level 3: Ambient light is off.

FCC Warning

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0cm between the radiator and your body.