Fully Automatic Washing Machine Owner's Manual

SAFETY INSTRUCTIONS

Safety Instructions

⚠️ For your safety, the information in this manual must be followed to minimize the risk of fire or explosion, electric shock, or to prevent property damage, personal injury or loss of life.

⚠️ This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities or lack of experience and knowledge unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

⚠️ Children should be supervised to ensure that they do not play with the appliance.

⚠️ If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.

⚠️ The new hose-sets supplied with the appliance are to be used and that old hose-sets should not be reused.

⚠️ The openings must not be obstructed by a carpet.

⚠️ This appliance is intended to be used in household settings.

Explanation of the symbols:

• Warning! This combination of symbol and descriptive word indicates a potentially dangerous situation which may result in death or serious injuries unless it is avoided.
• Caution! This combination of symbol and descriptive word indicates a potentially dangerous situation which may result in slight or minor injuries or damage to property and the environment.
• Note! This combination of symbol and descriptive word indicates a potentially dangerous situation which may result in slight or minor injuries.

Warning! Electric Shock!

• This washing machine is for indoor use only.
• Do not put this washing machine in a humid place.
• Hands should not be inserted into the rotating drum.
• Before doing any maintenance, unplug the appliance from the electrical source.
• Always unplug the machine and turn off the water supply after use.
• Be aware of the maximum and minimum inlet water pressure which is in megapascals (MPa).
• To ensure your safety, power plug must be inserted into an earthed three-pole socket. Check carefully and make sure that your socket is properly and reliably earthed.
• Make sure that the water and electrical devices provisions are connected by a qualified technician in accordance with the manufacturer's instructions and local safety regulations.
• This product is used only for domestic purposes.

Risk to Children!

• The appliance cannot be used by children and persons with reduced physical sensory or mental capabilities or lack of experience and knowledge if they have not been given supervision or instruction concerning use of the appliance in a safe way and do not understand the hazards involved.
• Cleaning and user maintenance shall not be done by children without supervision.
• Animals and children cannot climb into the machine. Check the machine before every operation.
• Children should be supervised to ensure they do not play with the appliance.
• Keep children and animals far away from the machine during operation.

Risk of Explosion!

• Do not wash or dry articles that have been cleaned in, washed in, soaked in, or dabbed with combustible or explosive substances (such as wax, oil, paint, gasoline, degreasers, dry-cleaning solvents, kerosene, etc.). This may result in fire or explosion.
• Rinse the clothes or wash articles thoroughly by hand before putting them in the appliance.

Caution Installing the Product!

• This washing machine is for indoor use only.
• It is not intended for built-in use.
• The openings must not be obstructed by a carpet.
• The washing machine shall not be installed in bathrooms or very wet rooms as well as in rooms with explosive or caustic gases.
• Remove all packaging materials before using the appliance. Otherwise, serious damage may result.
• The washing machine with a single inlet valve may only be connected to a cold water supply.
• The plug must be accessible after installation.
• Avoid places where the machine is exposed to direct sunlight. Plastic parts may become deformed or discolored.
• Avoid places where the machine may become frozen during cold weather.

Risk of Damaging Appliance!

• Your product is only for home use and is only designed for textiles suitable for washing machines.
• Do not climb up and sit on the glass lid of the machine.
• Cautions during Machine Handling and transport:
  1. The accumulated water shall be drained out of the machine.
  2. Handle the machine carefully. Never hold protruding parts of the machine while lifting.
  3. This appliance is heavy; it should be transported carefully.
• Please do not close the glass lid with excessive force.
• It is forbidden to wash carpets.

Operating the Appliance!

• Before washing the clothes for the first time, the product shall be operated without clothes using the "Tub Clean" program as displayed on the control panel.
• Flammable, explosive, or toxic solvents are forbidden. Gasoline and alcohol etc. shall not be used as detergents. Please select only detergents suitable for washing machines, especially for top-loading fully automatic washing machines.
• Make sure that all pockets are emptied. Sharp and rigid items such as coins, brooches, nails, screws, or stones etc. may cause serious damage to this machine.
• Never refill the water by hand during washing.

INSTALLATION

Product Description

The main components of the washing machine include:

• Glass lid
• Drum Frame
• Control panel
• Cabinet
• Water inlet valve
• Power cord and plug
• Handle
• Adjustable foot
• Drain hose

ℹ️ All illustrations in this manual are for reference only. Please refer to the product for the actual appearance of the parts.

Accessories

The following accessories are typically included:

• Inlet hose assembly
• Cabinet baseboard
• Owner's Manual
• Screw

Installation Area

Choose a stable, level surface for installation. Ensure adequate ventilation and avoid direct sunlight or freezing temperatures.

Unpacking the Washing Machine

Remove all packaging materials before use. Ensure all transit bolts and packaging are removed.

Base Cover Installation

Install the base cover as per the product design.

Levelling the Washing Machine

Proper levelling is crucial for stable operation and noise reduction.

• Check if the feet are properly attached to the cabinet. If not, rotate them to their original position and tighten the nuts.
• Use a leveler to check the alignment of the product. Adjust the feet as necessary.
• Loosen the lock nut and rotate the foot clockwise or counter-clockwise until it closely contacts the floor.
• Once the foot is in position, secure it by tightening the lock nut against the housing.
• Press down on the top corners of the machine alternately to ensure it is stable and properly adjusted.

ℹ️ Diagram Explanation: The diagram illustrates how to adjust the feet. A lock nut is used to secure the foot. Rotating the foot raises or lowers it to level the machine. Ensure lock nuts are tightened.

Selection of Tap

Ensure the water tap is compatible with the inlet hose provided.

Connection of Inlet Hose, Tap and Washing Machine

Connect the inlet hose securely to the tap and the washing machine's water inlet valve.

Drain Hose Positioning

Proper drain hose placement is essential to prevent water leakage and ensure efficient draining.

• Do not kink, protract, or compress the drain hose.
• Position the drain hose correctly.
• If the drain hose is too long, do not force it into the washing machine, as this may cause abnormal noises.

ℹ️ Drain Direction and Placement: The drain hose can be directed left or right. The end of the drain hose should be placed in a water trough or a drain pipe. The hose length should be less than 3 meters, and the height of the drain outlet should be less than 15 cm from the floor.

OPERATION

Preparation Before Washing

Ensure pockets are empty, zippers are closed, and delicate items are protected.

Washing

Select the appropriate wash course and options based on the laundry type and soil level.

After Washing

Remove laundry promptly. Turn off the water supply and unplug the machine if not in use.

Washing Matters Needing Attention

Follow safety guidelines regarding detergents and items that should not be washed.

The Usage of Detergent and Washing Powder

Use detergents specifically designed for automatic washing machines. Refer to the recommended detergent amount table.

Control Panel

The control panel allows selection of various wash courses, options, and settings. (Details not provided in source text).

Option

Various options may be available to customize the wash cycle, such as water level, spin speed, etc.

Personalized Setting of Washing Course

Some models allow saving personalized washing course settings.

Operations of Washing Process

The machine automatically progresses through the wash, rinse, and spin cycles.

Washing Course Table

Recommended Detergent Amount

MAINTENANCE

Cleaning and Care

⚠️ Before your maintenance starts, please unplug the machine and close the tap.

Proper maintenance of the washing machine can extend its working life.

Cleaning the Cabinet

The surface can be cleaned with diluted non-abrasive neutral detergents when necessary. If there is any water overflow, wipe it off immediately with a wet cloth. No sharp items are allowed.

ℹ️ Formic acid and its diluted solvents or equivalent are forbidden, such as alcohol, solvents, or chemical products, etc.

Cleaning the Inlet Filter

ℹ️ Inlet filter must be cleaned if the pressure of water from the inlet drops.

Water inlet valve filter cleaning:

1. Screw off the inlet hose from the back of the machine.
2. Pull out the filter with a pair of long nose pliers and reinstall it back after being washed.
3. Use a brush to clean the filter.
4. Reconnect the inlet hose.

Lint Filter Cleaning

There is a built-in lint filter in your washer that helps collect lint during the washing cycle.

• It is suggested to clean the lint filter every 10 cycles.
• Take it out and clean the filter with water. Then place it back into the washer.

TROUBLE SHOOTING

Refer to the troubleshooting section for common issues and solutions. (Content not provided in source text).

TECHNICAL SPECIFICATIONS

ENERGY EFFICIENCY TEST PROGRAM

Follow these steps to run the energy efficiency test program:

1. Press the "ON/OFF" switch.
2. Select the "Regular" program.
3. Adjust washing water level to the highest level "8 gear".
4. Select "Process", go to "(Rinse)", adjust the value by pressing the "Set" button, select Rinse 1 time.
5. Select "Process", go to "(Spin)", adjust the value by pressing the "Set" button, select Spin for 9 minutes.
6. Press the start button.