Philips Xperion 6000 Slim LED Work Lights
User Manual
Before You Start
Thank you for purchasing the Philips LED work lights. Its high-quality LED lighting offers a powerful wide-angle light output, enabling you to work effectively in your workshop, garage, or any other professional environment under optimal lighting conditions.
The Philips LED work lights bear the official Philips Automotive Grade Quality seal. Philips Automotive Grade Quality products are designed and developed following strict quality-control processes, including applicable ISO norms, ensuring consistently high production standards.
Important: Please read this user guide carefully before using your LED work lights. This guide contains important health and safety information.
If you need further assistance, please visit: www.philips.com/support or your local Philips Dealer. For more information, visit www.philips.com/xperion-6000.
Step 1: Unboxing and Contents
Verify that the package contains the following items:
- Philips Xperion 6000 Slim LED Work Light ✔️
- USB Type-C Cable ✔️
- Power Adapter (charger) ✔️
- User Manual ✔️
- Remote Control ❌
- Philips Multi Dock Station ❌
Note: The included accessories may vary by region or specific product package.
Step 3: Important Safety Precautions
To ensure safe operation and prevent damage, observe the following precautions:
- Do not look directly into the light beam, as it can cause eye damage ❌.
- Do not spray liquids directly onto the work light ❌.
- Keep the work light away from open flames or heat sources ❌.
- To clean the work light, use a damp cloth and mild soap. Ensure the device is switched off and unplugged before cleaning ✔️.
Disposal: This symbol ?️❌ indicates that the product should not be disposed of with regular household waste. Please follow local regulations for electronic waste disposal.
The product complies with CE and UKCA standards.
Step 4: Charging the Work Light
The Xperion 6000 Slim can be charged using a USB Type-C cable or the Philips Multi Dock Station.
Charging via USB Type-C
Connect the included USB Type-C cable to the work light and a compatible power adapter (not always included). Charging typically takes 4 hours to reach 100% battery capacity ?.
Charging via Philips Multi Dock Station
Place the work light into the Philips Multi Dock Station and connect the station to a power source using the provided cable ?. Charging also takes approximately 4 hours for a full charge.
Battery Status Indicator
The work light features an LED indicator to show the battery level:
- 81-100% battery: All 5 LEDs illuminated.
- 61-80% battery: 4 LEDs illuminated.
- 41-60% battery: 3 LEDs illuminated.
- 21-40% battery: 2 LEDs illuminated.
- 11-20% battery: 1 LED illuminated.
- Less than 10% battery: 1 LED flashing, indicating low battery ❗.
Step 5: Operating the Work Light
The Xperion 6000 Slim offers multiple lighting modes, adjustable via the power button:
- Spotlight Mode: Provides a focused beam. Output: 150 lumens. Runtime: Up to 9 hours.
- Eco Mode: Offers a balance of brightness and efficiency. Output: 250 lumens. Runtime: Up to 7 hours.
- Boost Mode: Delivers maximum brightness for demanding tasks. Output: 500 lumens. Runtime: Up to 4.5 hours.
- Off: Press and hold the power button to turn the light off.
The light can be cycled through these modes by pressing the power button. Specific sequence may vary; refer to diagrams for adjustment actions.
Step 6: Upgrade with Philips Find My Device Accessory
Enhance your work light's functionality with the Philips Find My Device accessory (sold separately).
Installation and Pairing
- Insert the accessory into the designated port on the work light. Follow the push/pull actions as indicated in the diagrams. Ensure correct insertion.
- Activate the accessory by pressing and holding the button on the accessory for more than 5 seconds (>5s). The work light will emit a series of beeps, confirming activation: "beep! beep! beep!".
- To use the accessory, hold the remote control and press the button. The work light will respond within a range of 0-10 meters, indicated by light and sound signals ?.
- Pressing the button for less than 1 second (<1s) may deactivate or change the accessory's function ❌.
Technical Specifications
| Description | Value |
|---|---|
| Light output @25°C, 60RH | 150lm (Spot) / 250lm (Eco) / 500lm (Boost) |
| Operation time (up to) @25°C, 60RH | 9h (Spot) / 7h (Eco) / 4.5h (Boost) |
| Battery | Rechargeable battery 3.7V 2600mAh |
| Charging (Via Type C USB) | 5V 1A |
| Charging (Via Multi Dock Station) | 5V 1A |
| Charging time (up to) @25°C, 60RH | 4h |
| Impact Protection (IK) | IK07 |
| Ingress Protection (IP) | IP54 |
| Operating temperature | -10°C to 40°C |
| Storage temperature | -20°C to 50°C |
| Lamp dimensions (L*W*H) | 40x45x167 mm |
| Product weight | 334g |
| Magnet | Yes |
Warranty Information
This product comes with a 3-year warranty*.
*An additional 2+1 year warranty is available. For details, please visit: www.philips.com/auto-warranty.
To register your warranty, please provide the following information:
- Name: _________________________
- Address: _________________________
- Phone number: _________________________
- Product name: Philips Xperion 6000 Slim
- Purchasing date: _________________________
Lumileds is the warrantor of this product. © 2021 Lumileds Holding B.V. All rights reserved. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license.
Product Code: 3211 008 24611
