Cuisinart Hurricane™ Pro Blender

Introduction

Cuisinart is proud to introduce a blender for home use that delivers the power and advanced functionality of top-of-the-line commercial blenders. The Hurricane™ Pro delivers a level of power that far exceeds standard home blenders. Exclusive BlendLogic™ Smart Technology senses variations in the load and instantly adjusts blending speed, and a unique memory function lets you change – and saves – preset times. This blender is built to last, and backed by an unprecedented 10-year limited motor warranty. Explore the recipes in your Hurricane Handbook and power up – this is a blender you're going to want to spend time with!

Important Safeguards

When using electrical appliances, basic safety precautions should always be taken, including the following:

1. READ ALL INSTRUCTIONS.
2. Unplug from outlet when not in use, before putting on or taking off parts, and before cleaning or removing contents from blender container. Never put hands into the blender container, or handle the blades with appliance plugged in.
3. To protect against electrical hazards, and permanent damage to unit, do not put motor base of blender in water or other liquids.
4. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
5. Children should be supervised to ensure that they do not play with the appliance.
6. Do not use carbonated liquids in the blender container, or in any blending container. Using carbonated liquids in a blender container may result in injury.
7. Do not pour boiling water into the blender container.
8. Do not blend liquids for more than 6 minutes.
9. Avoid coming into contact with moving parts.
10. Do not operate this blender or any other appliance with a damaged cord or plug, or after the appliance malfunctions or is dropped or damaged in any manner. Return appliance to the nearest authorized service facility for examination, repair, or electrical or mechanical adjustment.
11. The use of attachments, including canning jars, not recommended by the manufacturer may cause a risk of injury to persons.
12. Do not use outdoors.
13. Do not let cord hang over edge of table or counter, or touch hot surfaces.
14. Keep hands and utensils out of container while blending to prevent the possibility of severe personal injury and/or damage to the blender. A plastic scraper may be used, but must be used only when the blender is not running.
15. Blades are sharp. Handle carefully.
16. Always operate blender with lid in place.
17. See Cleaning and Maintenance instructions. Add: Not for water jet cleaning.
18. Always operate blender with jar pad properly in place.
19. Do not fill above MAX FILL LINE for blending, SOUP or CLEAN settings.
20. If the container overflows during blending, there is too much liquid/ingredients in the container. Stop blending, remove enough liquid/ingredients to below MAX FILL LINE, and continue blending. Do not operate if overflowing.
21. Do not operate your appliance in an appliance garage. When storing in an appliance garage, always unplug the unit from the electrical outlet. Not doing so could create a risk of fire, especially if the appliance touches the walls of the garage or the door touches the unit as it closes.
22. Do not leave the Cuisinart® Hurricane™ Pro blender unattended while operating.
23. The use of ear protection is recommended during extended operating periods.
24. Ensure the jar coupler and motor coupler are aligned and engaged before operating. If unable to engage, remove container and shake contents, then try again.
25. The coupling seat may be hot after running – do not touch.
26. Replace jar pad if worn.
27. When the power is ON and the Start/Stop button is flashing, do not touch coupling seat, interfere with blade movement, or remove blender jar pad. Accidentally touching a speed button may activate the blender.
28. When blending hot liquids, remove center piece of two-piece cover.

SAVE THESE INSTRUCTIONS FOR HOUSEHOLD USE ONLY

Grounding Instructions

For your protection, the Cuisinart® Hurricane™ Pro Blenders are equipped with a 3-conductor cord that has a molded 3-prong grounding-type plug, and should be used in combination with a properly connected grounding-type outlet as shown in Figure 1. If a grounding-type outlet is not available, an adapter, shown in Figure 2, may be obtained so that a 2-slot wall outlet can be used with a 3-prong plug.

As shown in Figure 3, the adapter must be grounded by attaching its grounding lug under the screw of the outlet cover plate. ❗ CAUTION: Before using an adapter, it must be determined that the outlet cover plate screw is properly grounded. If in doubt, consult a licensed electrician. Never use an adapter unless you are sure it is properly grounded.

Diagram Description: The grounding diagram shows three figures. Figure 1 illustrates a properly connected 3-prong plug and grounding conductor. Figure 2 shows an adapter that allows a 3-prong plug to be used with a 2-slot outlet. Figure 3 details how to attach the adapter's grounding lug to the outlet cover mounting screw.

Note: Use of an adapter is not permitted in Canada and Europe. Green/Yellow: Earth Ground. Blue: Neutral. Brown: Live. NOTE: User-installed cord set plugs are not permitted in Europe.

This appliance is for 120 volts only and should not be used with a converter.

❗ IMPORTANT: Always unplug the Cuisinart® Hurricane™ Pro blender from outlet when assembling and disassembling.

To Reset the Unit

Your blender is equipped with a Resettable Thermal Protector to protect the motor. If the motor shuts down, unplug the blender. Let the blender rest for approximately 15 minutes. Once the resting period has elapsed, plug the power cord back into the outlet and continue blending. If your blender does not function properly following this procedure, discontinue use and contact a certified Cuisinart Consumer Service Center.

Important Unpacking Instructions

1. Place the box containing the Cuisinart® Hurricane™ Pro blender on a flat, sturdy surface before unpacking.
2. Open box and remove instruction book, the Hurricane Handbook cookbook, and any printed materials from top of box.
3. Remove packing materials and all components. ❗ CAUTION: Sharp blade inside blender container.
4. Place all packing materials back into the gift box and save, in the event that future shipping of the machine is needed.

Features and Components

Diagram Description: An illustration of the Cuisinart Hurricane Pro blender, with labels pointing to its various parts.

• A. 2-Ounce Removable Measuring Cap: A small cap that fits into the blender lid for measuring small amounts.
• B. Tight-Seal 2-Piece Blender Lid: The main lid for the blender jar.
• C. Removable Dishwasher Safe Lid Seal: A seal that fits into the lid, ensuring a tight closure.
• D. Blender Jar with Soft-Grip Handle: A 64 oz. (2 L) BPA-free Eastman Tritan™ Copolyester jar with clear English and metric graduations and a comfortable handle.
• E. 6-Prong Blade/Ball-Bearing Assembly: A commercial-quality stainless steel blade assembly with six prongs and ball bearings for durability and performance.
• F. Removable Dishwasher-Safe Jar Pad: A pad that sits between the blender jar and the motor base.
• G. ON/OFF Power Switch: Located on the back of the unit. Press ON to turn the blender on. The LCD and touchpad lights will illuminate, indicating the blender is ready to use.
• H. Turbo Boost Button: Delivers an instant burst of 30,000 RPM of power at any time.
• I. Variable Speed Dial: Allows selection of speeds from 1500 to 24,000 RPM.
• J. Blender Base: The motor housing unit.
• K. Control Panel: The interface for operating the blender, located on the front of the base.

Control Panel

• 1. LCD Screen with Countdown Timer: A brightly lit display that shows the selected function, blending time, and speed. It prompts the user through each step. The screen goes dark after 15 minutes of inactivity.
• 2. START/STOP Button: Press to start the blending process. Press again to stop.
• 3. SMOOTHIE Button: Selects preset Fruit smoothie or Green smoothie settings.
• 4. ICE CRUSH Button: Preset to crush ice in seconds.
• 5. SOUP Button: Preset to make hot pureed soup.
• 6. PULSE Button: Allows pulsing at any selected speed.
• 7. CLEAN Button: A 30-second preset cycle to clean the blades and blender jar after each use.
• 8. TIMER/MEMORY FEATURE: Up and down arrows allow adjustment of blending time to personal taste. The unit can memorize customized settings for presets.

Operating Instructions

Place the motor base of the Cuisinart® Hurricane™ Pro on a flat, sturdy surface. Ensure the surface is clean and dry. Fit the blender jar onto the motor base. Once assembled, plug the Cuisinart® Hurricane™ Pro into an electrical outlet.

Add all necessary ingredients to the blender jar and secure the lid. You may add more ingredients by removing the measuring cap and dropping them through the fill area. Replace the measuring cap after adding any ingredients.

Never put hands in the blender jar with the blender plugged in.

1. POWER ON: Press the Power ON/OFF switch at the back of the unit. This activates a 10-second process ending at the Ready mode. During this process, all control buttons illuminate, and the LCD screen displays the Cuisinart logo, followed by “the most trusted name in the kitchen,” and then “SELECT SPEED OR FUNCTION.” The START/STOP control will start flashing.
2. READY MODE: When in ready mode, the LCD screen displays “SELECT SPEED OR FUNCTION.” The START/STOP button will be active and flashing, and the Turbo Boost button will be active and illuminated.
   • Pressing START/STOP begins the blending process. Pressing and holding the Turbo Boost button also starts blending. If no function or time is selected, the blender defaults to 3 minutes at Speed 5. Time counts up on the LCD screen.
   • If START/STOP is not pressed within 15 minutes, the blender enters Sleep Mode, and the LCD display goes dark.
   • To return to Ready mode, press any button.
3. SPEED: You can adjust the speed in Ready mode or while blending by turning the dial. The default is Speed 5, with options from Speed 1 (1,500 rpm) to Speed 10 (24,000 rpm). Once speed is selected, press START/STOP or PULSE to activate blending.
4. PULSE: When the blender is running at speed 1-10, pressing and releasing the PULSE control allows you to pulse ingredients on and off for precise control.
5. TURBO: While blending on any function other than “SOUP” or at any speed, press and hold the Turbo Boost button for a burst of power at the blender's top speed (30,000 rpm).
6. TIMER: Use the [up arrow] and [down arrow] buttons to set/adjust blending time when using the speed control knob. You can adjust time in one-second intervals by pressing and releasing, or press and hold to scroll more quickly.
7. MEMORY FEATURE: This feature allows you to adjust and customize the timing for all preset functions (Smoothie, Ice Crush, Soup & Clean) to your personal needs, and it will memorize that setting. To use, select a preset function, use the timer arrows to adjust the timing, then press START/STOP to activate. Your memorized setting is saved unless the unit is powered off or unplugged, which resets it to default.

Preset Functions

• 8. SMOOTHIE: Offers two preset options. Press the SMOOTHIE button once for Fruit Smoothie (45-second run time) or a second time for Green Smoothie (90-second run time). Press START/STOP to begin. Time counts down on the LCD. (See TIMER/MEMORY FEATURE for adjustments.) Use Fruit Smoothie for most drinks. Use Green Smoothie for ingredients like fibrous leafy greens and fruits with tiny seeds.
• 9. ICE CRUSH: Operates at Speed 10 for 10 seconds. Press the ICE CRUSH control, then press START/STOP to begin crushing ice. Time counts down.
• 10. SOUP: Runs for 6 minutes, ideal for processing and heating ingredients. Do not exceed the MAX FILL LINE.
• 11. CLEAN: A 30-second preset cycle to clean the jar and blades. Add a few drops of dishwashing detergent and one cup of warm water to the jar, put on the lid, press CLEAN, then START/STOP. The cycle runs from low to high speed. Rinse thoroughly. May require multiple cycles for tough tasks.
• 12. PAUSE: While blending in any preset function, press the active button to pause. Press again to reactivate.

Helpful Reminders

• Lid should always be secure while the unit is in operation.
• Always use the blender on a clean, sturdy, and dry surface.
• Secure the measuring cap insert in the lid by twisting it clockwise.
• Additional ingredients can be added during blending by removing the measuring cap insert, adding ingredients, and replacing it securely.
• Do not place the blender jar on the base while the motor is running, or remove the jar before the blender has stopped running.
• Cut all foods into 1-inch pieces for uniform results.
• Do not attempt to blend boiling liquids or solid frozen foods (except ice cubes or frozen fruits cut to 1-cubic inch or smaller).
• When blending, add liquid ingredients first, followed by softer ingredients. Ice or frozen fruit should be added last.
• Use a plastic spatula as needed, only when the blender is turned off. Never use metal utensils, as they can damage the blender jar or blade.
• After 3 minutes of continuous blending, the blender will automatically shut off, unless in SOUP mode (which runs for 6 minutes).
• Milling hard ingredients and spices may cause some clouding of the blender jar interior, but will not affect performance.
• Use Turbo Boost function for maximum power to break up hard ingredients.
• Do not exceed the MAX FILL LINE when adding food or liquid.
• Ensure the blender jar is completely dry when chopping ice, fresh herbs, garlic, onion, zest, breadcrumbs, or nuts and spices.
• Do not store food or liquids in the blender jar.
• Be careful not to overprocess foods.
• Do not use any utensil inside the blender jar with the motor on.
• Unplug the blender before reaching into the blender jar.
• Never use carbonated liquids in the blender jar, as this may cause injury.

Recipe Tips

• Allow hot foods to cool slightly before blending to prevent steam buildup, which may cause the lid to lift.
• When making pureed soup or sauce without the soup function, add ½ to 1 cup of reserved cooking liquid with the cooked solids. Start blending on Speed 1 and gradually increase speed for desired consistency.
• Keep ice cubes made from juices, milk, or fruit purées on hand to substitute for plain ice in smoothies and frosty beverages to prevent dilution.
• Freeze overripe bananas (peeled, cut, and wrapped) for delicious smoothie or shake additions.
• Use the timer for ingredients that should not be overblended, such as heavy cream for whipped cream or egg whites for meringues.
• To make frozen treats, combine 1 cup liquid (e.g., rice milk, almond milk, soy milk) and 1 pound frozen fruit chunks in the blender jar. Select Speed 10 and press START. Blend until combined, then gradually decrease speed once large chunks are broken up and the mixture no longer turns over.
• When blending thick items like hummus, an air bubble may form in the center. Lower the speed to “pop” the bubble and allow ingredients to blend. Adding more liquid (water or oil) can also help.

Food Chart

Blender Cleaning and Maintenance

Always unplug the Cuisinart® Hurricane™ Pro blender from the electrical outlet before cleaning. Never immerse blender base in water or other liquids.

1. Remove the blender jar from the blender base and remove the lid. The jar must be cleaned and dried after each use or when the blender has not been used for an extended period. We recommend using the automatic CLEAN function (see page 6).
2. Wash the lid in warm, soapy water and rinse thoroughly.
3. The blender jar, blade assembly, and lid assembly are all dishwasher safe.
4. To clean the blender base, wipe the exterior with a soft cloth or sponge dampened with cleaning solution. Do not immerse the base in cleaning solution or water. Wipe with a dry towel and ensure the base is completely dry before using.
5. Ensure the blender is thoroughly dry and properly assembled with the jar pad in place before operating.

An authorized service representative should perform any other servicing.

Warranty Information

Limited Three-Year Warranty

This warranty supersedes all previous warranties on the Cuisinart® Hurricane™ Pro Blender. This warranty is available to consumers only. You are a consumer if you own a Cuisinart® Hurricane™ Pro Blender purchased at retail for personal, family, or household use. Except as otherwise required by applicable state law, this warranty is not available to retailers or other commercial purchasers or owners. Cuisinart warrants that your blender will be free of defects in material or workmanship under normal home use for three years from the date of original purchase. Visit www.cuisinart.com for product registration, which facilitates warranty verification but does not eliminate the need for proof of purchase. If proof of purchase is unavailable, the warranty period is calculated from the date of manufacture.

If your blender proves to be defective within the warranty period, Cuisinart will repair or replace it at its discretion. To obtain warranty service, call the Consumer Service Center toll-free at 1-800-726-0190 or write to: Cuisinart, 7475 North Glen Harbor Blvd., Glendale, AZ 85307.

For returns, enclose $10.00 for shipping and handling, along with your return address, daytime phone number, a description of the defect, the product serial number (stamped on the bottom of the product base), and any other pertinent information. Payment should be by check or money order. California residents need only supply proof of purchase and should call 1-800-726-0190 for shipping instructions.

NOTE: For added protection and secure handling, use a traceable, insured delivery service. Cuisinart is not responsible for in-transit damage or packages not delivered. Lost or damaged products are not covered under warranty.

California Residents Only

California law offers two options for in-warranty service: return the product to the store of purchase or another retail store selling Cuisinart products of the same type. The store may repair, refer to an independent facility, replace, or refund the purchase price less usage. If these options do not provide adequate relief, the consumer may take the product to an independent repair facility. Cuisinart is responsible for reasonable costs of service, repair, replacement, or refund for nonconforming products under warranty.

California residents may also return defective products directly to Cuisinart for repair or replacement by calling 1-800-726-0190. Cuisinart will cover the costs of repair, replacement, and shipping/handling.

Before Returning Your Cuisinart Product

If experiencing problems, call the Consumer Service Center at 1-800-726-0190 before returning. Representatives can often help resolve issues without service. If service is needed, they can confirm warranty status and direct you to the nearest service location.

This blender is manufactured to strict specifications for 120-volt outlets and authorized accessories/parts. This warranty expressly excludes defects or damages caused by:

• Attempted use with a converter.
• Use with unauthorized accessories, replacement parts, or repair service.
• Damage caused by accident, misuse, shipment, or non-ordinary household use.
• Incidental or consequential damages (some states may not allow these exclusions).

Important: If service is performed by a non-authorized center, remind them to call Cuisinart's Consumer Service Center at 1-800-726-0190 for proper diagnosis, correct parts, and warranty verification.

The motor carries an exclusive limited 10-year warranty.