XTOOL S1 Quick Start Guide

Multi-language Support and More Information

User guides and additional help are available in multiple languages. Visit support.xtool.com/article/1106 to access these resources.

List of Items Included

Your XTOOL S1 package contains the following components:

• XTOOL S1 Laser Machine
• Laser module
• Distance sensor
• Key
• Screwdriver
• Smoke exhaust pipe
• Parts storage box
• USB cable
• Screws (M3*8, M3*10)
• Power cable and adapter
• Material pack
• Brochure
• Safety Instructions

The XTOOL S1 is available in multiple color options. This guide uses the black-green version for illustrations.

Meet Your XTOOL S1

Familiarize yourself with the main components of your XTOOL S1:

• Power switch: Turns the device on/off.
• Power port: Connects the power supply.
• USB port: For computer connection.
• Port for the key: Where the access-control key is inserted.
• Emergency stop switch: Red button to immediately cut power in emergencies.
• Tube fitting for air assist set: Connection point for the air assist system.
• Tube fitting for fire safety set: Connection point for fire safety accessories.
• Extension port (x3): For connecting accessories.
• Smoke outlet: For connecting the smoke exhaust pipe.
• Distance sensor: Helps measure the distance to the material.
• Button: General function button.
• Annular indicator: Provides status feedback through light patterns.

Preparations

Before operating your XTOOL S1, follow these preparation steps:

1. Remove transit blocks: Remove the blocks that secure the x-axis guide rail during shipping.
2. Install the laser module: Secure the laser module using the provided M3*10 screws. Ensure the locating pin is inserted and moved down.
3. Install the distance sensor: Connect the distance sensor to its designated port.
4. Install the smoke exhaust pipe: Connect the smoke exhaust pipe to the smoke outlet. Ensure it is properly sealed to vent harmful smoke and fumes outside or to a purifier.
5. Insert the access-control key: Insert the key into the machine to unlock its functions. The protective cover can be stored away after removal.
6. Check the emergency stop switch: Ensure the emergency stop switch is not pressed in.
7. Connect to a power supply: Connect the power cable and adapter to the device and a power source.

Using Your XTOOL S1

For Computers:

1. Connect the XTOOL S1 to your computer via USB and power it on.
2. Download and install either the free XTOOL Creative Space (XCS) software from xtool.com/pages/software or the paid third-party software LightBurn from lightburnsoftware.com.

For detailed software operation instructions, visit support.xtool.com/product/24.

For Mobile Devices:

Download the XTOOL Creative Space app from the Google Play Store or Apple App Store, or visit xtool.com/software.

For detailed software operation instructions, visit support.xtool.com/product/24.

Example Projects

Discover various projects and tutorials by visiting support.xtool.com/product/24 and navigating to the 'Try Some Projects' section. The included material pack allows you to start creating immediately.

Understanding the Annular Indicator

The annular indicator provides visual feedback on the machine's status:

Knowledge About Parts and Accessories

1. Access-control Key

The key is a physical security device to control processing access. Insert it to unlock functions; remove it to prevent unauthorized use. Keep it safe, perform regular checks, and follow operation instructions.

Cautions:

• Keep the key safe when not in use.
• Check key status regularly; repair or replace if insertion is difficult.
• Use the key to lock/unlock functions at the appropriate times.

2. Emergency Stop Switch

This is a critical safety device that cuts off power in emergencies. It's typically a red button. To use, press it firmly. To reset, turn it clockwise about 45 degrees and restart the machine.

3. Exhaust Fan

Cleaning the exhaust fan is crucial for:

• Cooling efficiency: Prevents overheating and ensures proper operation.
• System stability: Maintains thermal management.
• Service life: Prevents premature wear.

If smoke exhaust slows, clean the fan. Steps: Turn off, remove pipe, clean fan with moist swab (water/alcohol), reattach pipe.

4. Laser Safety Goggles

Laser safety goggles protect eyes from high-energy laser beams, which can cause irreversible damage. They reflect or absorb beams. Even with goggles, avoid looking directly into the laser. Some machines have protective enclosures for Class 1 laser safety, but Class 4 machines require goggles.

5. Air Assist Set

The air assist set blows air into the machine via a tube to clean the processing area, cool materials, exhaust smoke, and blow away residues. It improves processing results, stability, and precision. Purchase separately from xtool.com.

• Cleaning the processing area: Disperses smoke, dust, and debris.
• Cooling the processed material part: Prevents material damage from heat.
• Facilitating smoke exhaustion: Helps remove harmful fumes.
• Blowing away residues: Ensures smoother cuts.

6. Lens Protector

The lens protector can get dirty from smoke, potentially reducing laser power or damaging the module. Regular maintenance is required.

Maintenance:

• Avoid scratches: Handle carefully, avoid sharp objects.
• Working environment: Keep the machine interior dry, dust-free, and free of corrosive gas. Ensure the exhaust fan works.
• Check status: Ensure the protector is firmly in place.
• Clean regularly: Remove dust and dirt to maintain laser transmission rate.
• Replace regularly: Replace if worn to prevent reduced performance or faults.

Cleaning:

Get ready: Detergent (alcohol, anhydrous acetone), cleaning tool (lint-free cloth, swab).

Steps:

1. Turn off the machine and remove the laser module.
2. Remove the nozzle from the laser module.
3. Clean the lens protector and nozzle with a lint-free cloth moistened with alcohol.

Frequency:

• 10W laser module: Clean every 4 hours of processing.
• 20W laser module: Clean every 4 hours of processing.
• 40W laser module: Clean every 1 hour of processing.

Using the air assist set can reduce cleaning frequency.