Instruction Manual for RAK models including: RP2040, RP2040 WisMesh Starter Kit for Meshtastic, WisMesh Starter Kit for Meshtastic, Starter Kit for Meshtastic, Meshtastic

WisMesh RP2040 Starter Kit for Meshtastic flyer 250414

WisMesh RP2040 Starter Kit for Meshtastic flyer 250414

Apr 18, 2025 — The Meshtastic RP2040 Starter Kit is ideal for building off-grid LoRa mesh networks. It features the WisBlock. RAK11310 Module, powered by the Raspberry Pi ...

[PDF] WisMesh RP2040 Starter Kit for Meshtastic flyer 250414

Pre-flashed with Meshtastic firmware, the kit ensures a quick and easy setup. It is designed to support Meshtastic Client, Tracker, and Router Repeater roles.

• Download [pdf]
• Download Optimized



File Info : application/pdf, 1 Pages, 983.37KB

Document Document

Thanks for choosing RAKwireless!
The Meshtastic RP2040 Starter Kit is ideal for building off-grid LoRa® mesh networks. It features the WisBlock RAK11310 Module, powered by the Raspberry Pi RP2040. Pre-flashed with Meshtastic firmware, the kit ensures a quick and easy setup. It is designed to support Meshtastic Client, Tracker, and Router Repeater roles.
For this device use Meshtastic firmware-rak11310-w.x.yy.zzzzzzz.uf2

8261003R

Package Contents
WisBlock Base Board x 1 (RAK19001 or RAK19003 or 19007) RAK11310 WisBlock Core Module (RP2040) x 1 SMA Rubber LoRa Antenna x 1 IPEX to SMA Cable for LoRa Antenna x 1 PCB Antenna for LoRa x 1 USB Cable x 1 RAK12500 GNSS Module x 1 (Optional) GPS Antenna x 1 (Optional) RAK1921 OLED Display Module x 1 (Optional)

RAK11300

RAK11300

RAK11300

Getting Started

Step 1
Attach the LoRa PCB Antenna to the IPEX connector on the RAK11310 (LoRa ). For an external antenna, connect the IPEX to SMA cable, then attach and secure the SMA Rubber Antenna.

RAK11300
RAK19001

OR

RAK19003

OR

RAK11300

RAK19007

RAK11300

OR

8261003R

Step 2
Snap the GPS Antenna onto the RAK12500 GNSS module.

RAK19001

RAK19003

RAK19007

8261003R

8261003R

Step 3 (If needed)
Solder the RAK1921 OLED Display Module onto the baseboard using a Pin Header. Trim if necessary.

RAK19003

RAK19007

Step 4
Connect the PCB to your computer using a USB cable for configuration.

RAK19001

Need More Information?
For detailed product specifications, configuration guides, and technical support, scan the QR code on the right to access our online document center. Stay up to date with the latest resources and troubleshooting tips to get the most out of your device.

Scan for WisMesh RP2040 Starter Kit for Meshtastic Documentation