User Guide for Ekwb models including: 106834 PCI Bracket Pass Through, 106834, PCI Bracket Pass Through, Bracket Pass Through, Pass Through, Through
EK Water Blocks EK-Loop PCI Bracket Pass-Through ab € 29,29 (2024) | Preisvergleich Geizhals Österreich
File Info : application/pdf, 6 Pages, 884.38KB
DocumentDocumentEK-Loop PCI Bracket Pass-Through USER GUIDE Please note the installation of the product is intended to be undertaken by an adequately trained and experienced person. You are installing the product at your own risk. If you are not properly trained or experienced or feel unsure about the installation procedure, please refrain from installing the product yourself and contact our tech support for assistance. We disclaim our liability for any damages to the product as well as incidental, consequential, or indirect damages incurred due to improper or inappropriate installation. Before you start using this product, please follow these basic guidelines: Carefully read the manual before beginning with the installation process. The EK Fittings require only a small amount of force to screw them firmly in place since the liquid seal is ensured by the rubber O-ring gaskets. Using corrosion-inhibiting coolants is always recommended for liquid cooling systems and mandatory for nickel-plated water blocks! Do not use pure distilled water! For best results, EK recommends the use of EK-CryoFuel coolants! To reach optimal performance, make sure to bleed the air out of your water block thoroughly! TABLE OF CONTENTS TECHNICAL SPECIFICATIONS AND MAIN PARTS 4 INSTALLING THE EK-Loop PCI Bracket Pass-Through 4 SUPPORT AND SERVICE 6 SOCIAL MEDIA 6 - 3 - TECHNICAL SPECIFICATIONS AND MAIN PARTS 4 Position EAN Description 1 106837 Single slot bracket (Bl.) 3 5 1 2 106834 Pass Trought nut (Ni) 3 106832 Pass Through screw (Ni) 2 4 106930 Rubber 5.5/8*1 NBR 5 5192 OR 7 x 1.5 mm Quantity 1 2 2 1 2 INSTALLING THE EK-Loop PCI Bracket Pass-Through STEP 1 First, remove one (1) GPU expansion slot from the PC Chassis. Save the removed screw for later steps. For this step, you will need: Phillips Head Screwdriver PC CHASSIS SCREW GPU EXPANSION SLOT STEP 1 - 4 - PC CHASSIS SCREW STEP 2 Replace the original GPU Expansion slot with the EK-Loop PCI Bracket Pass-Through. Secure the bracket with the saved PC Chassis screw. Make sure to rotate the bracket as shown in the picture. * The cable management hole, featuring a rubber gasket, prevents friction damage to cables passing through the metal gap on the bracket. For this step, you will need: EK-Loop PCI Bracket Pass-Through PC Chassis screw Phillips Head Screwdriver EK-LOOP PCI BRACKET PASS-THROUGH STEP 2 - 5 - SUPPORT AND SERVICE In case you need assistance or wish to order spare parts or a new mounting mechanism, please contact: https://www.ekwb.com/customer-support/ For spare parts orders, refer to the page with "TECHNICAL SPECIFICATIONS AND MAIN PARTS" where you can find the EAN number of each part you might need. Include the EAN number with quantity in your request. SOCIAL MEDIA EKWaterBlocks @EKWaterBlocks ekwaterblocks EKWBofficial ekwaterblocks