TECHNI MOBILI RTA-S06 Rolling File Cabinet with Glass Top Instruction Manual

Instruction Manual for TECHNI MOBILI models including: RTA-S06 Rolling File Cabinet with Glass Top, RTA-S06, Rolling File Cabinet with Glass Top, File Cabinet with Glass Top, Cabinet with Glass Top, with Glass Top, Glass Top

Installation Manual (PDF)

Techni Mobili Rollingg File Cabinet, Regular, gray : Office Products

MODEL RTA-S06

m.media-amazon.com

File Info : application/pdf, 16 Pages, 1.95MB

A1MPQONWBcL

ROLLING FILE CABINET WITH GLASS TOP
MODEL RTA-S06
ASSEMBLY INSTRUCTIONS
REV.OL-7284-0423
Thank you for purchasing our product

FRENCH
Scan QR to view the manual in French

ARABIC
Scan QR to view the manual in Arabic

P.1

RTA-S06

P.1

Do a quick inventory of all the parts and hardware listed below.

For Support, assembly questions & Replacement Parts within the 48 Contiguous United States:

Please email us at: support@rtaproducts.com

Replacement Parts for International Customers & AK-HI-PR orders: RTA Products will replace the part free of charge, while the customer is responsible for shipping costs plus any International local taxes or duties.

1 Top drawer left
x1 panel

MAIN PARTS LIST

2 Top drawer right
x1 panel

3L Locking caster
x2

4 Top drawer front
x1 panel

3N Non-locking caster
x2

5 Drawer bottom panel 6 Top drawer back

x1 panel

7 Bottom drawer left 8 Bottom drawer right

x1 panel

9 Bottom drawer front panel
x1

10 Bottom drawer back panel
x1

11 File tubes, Set of 2 pcs
x1
Set

12 Sliders, Set of 4 pcs for each drawer
x2
Set

13 Handle
x2

"Flat": 2 pcs, go inside the cabinet

"L shaped": 2 pcs, go on the drawers

P.2
14 Left panel
x1

RTA-S06

15 Right panel
x1

16 Bottom panel
x1

P.2
17 Back panel
x1

18 Top wood panel
x1

Ø1x2.75"

19 L bracket
x1 and Nut
Set

20 Bottom drawer
x1 front wheel

21 Support tube
x4

22 Top glass panel
x1

23A Metal fitting A,
x1 Set set of 2 pcs

23B Metal fitting B,
x1 Set set of 2 pcs

23C Metal fitting C,
x1 Set set of 2 pcs

23D Lock and keys,
x1 Set matching set

23E Metal locking bar
x1

16.75"

23F Tiny screw F for 23C, 23G Metal ring G for lock

x1 Set set of 2 pcs

MAIN PARTS LAYOUT (FOR REFERENCE):

22 18

23A

23F

23C

LIST OF HARDWARE, SCREWS AND FITTINGS

PART QTY

ITEM

A 16 M6x40

B 8 M4X35

C 30 M3x15

23E

23F

23C

10 8

23A

9 7

D 4 M4x20

E 18 M4x14

F 1 M6x12

M6x20 Headless

H 4 M6x35

P.3

RTA-S06

P.3

BEFORE YOU START THE ASSEMBLY, PLEASE READ THE FOLLOWING TIPS AND WARNINGS.

· Please read the assembly instructions throughly and

follow step by step.

· Make sure you understand which hardware will be used on each step. Using the wrong size of screw, bolt or pin might strip the threads or cause damage to the part in which it is being used.
· To avoid misalignments, always leave the screws loosely and do not tighten them until all the pieces are positioned correctly.
· Do not overtighten or force the screws as they might break, strip, damage the threads of the holes, or get stuck inside the parts.
· If the hole seems to small for the screw, make sure you are using the correct size of screw and/or that you are installing it in the correct hole.
· Sometimes on the wood panels the laminate or material might be covering the hole partially or entirely, if there is no visible hole or if it looks too small, pass and press the tip of your finger over the area to feel its indentation, and carefully pierce the laminate to uncover the hole underneath.
· After the item is assembled, you can use rubbing alcohol to erase or remove the visible part numbers printed or labeled on the pieces.

30mm

M6x30

P.4

RTA-S06

P.4

THE ASSEMBLY STEPS START ON NEXT PAGE

CAM BOLT AND CAM LOCK TUTORIAL
THE INSTRUCTIONS BELOW
ARE NOT ACTUAL ASSEMBLY STEPS This unit uses cam bolts and locks (also known as mini fixes).
If you are not familiar with this kind of hardware, the below is a tutorial that explains how to use them on the steps where they are required.

1. Screw the bolt into the indicated hole on the panel indicated in the assembly step.
THIS IS ONLY A TUTORIAL

2. Join the other panel (with the big hole) to the panel with the bolt. If it comes with the cam locks already pre-installed, make sure to align them to receive the bolt's head (refer to point 3). There might be a very small gap between the panels which is normal.
If the cam locks come pre-in stalled, make sure they are aligned (see point 3).

3. Insert the cam lock on the panel with the big hole making sure it goes aligned to receive the bolt's head.

THIS IS ONLY A TUTORIAL

THIS IS ONLY A TUTORIAL
Cam lock alignment

4. Use a Phillips screwdriver to turn the cam lock clockwise. This will lock the panels togheter and also will close any gaps.
THIS IS ONLY A TUTORIAL

P.5

RTA-S06

P.5

ASSEMBLY STEPS

WE RECOMMEND TO PLACE THE PIECES OVER BLANKETS TO PROTECT THEIR FINISH DURING ASSEMBLY.

STEP 1 Hardware:

M4x14 Pcs

Attach the casters 3 to the bottom surface of panel 16 with screws E as indicated: · The locking casters 3L go at the FRONT of the panel. · The non-locking casters 3N go at the BACK.

NON-LOCKING go at the back

BOTTOM surface:

LOCKING

go at the front

TOP surface:

(Front)

STEP 2 Hardware:

· Slide the metal fittings through the metal bar 23E in the following exact order: - One of 23A with the flat side UP. - Both 23C facing UP. - The second 23A with the flat side UP.
· Align the pieces 23C in between the marks on the bar 23E, and insert the tiny screws 23F into 23C and tighten to leave 23C stationary within those marks.

FIRST INSERT:
23A 23C 23C 23A

THEN ALIGN 23C:

(Bottom)
23A go with flat side facing UP.

23E

(Top)

23F

THEN TIGHTEN 23C:

(Bottom)

23C

23E

23C

(Top)

P.6

RTA-S07

P.6

STEP 3 Hardware:

Assemble the locking system to the right panel 15 by attaching the fittings 23A with screws C as shown.

M3x15 Pcs

(Top)

23E
(23E goes with rods at top)

23C 15

(Front)

STEP 4

Grab all the 3 sets of sliders 12 (total 4 pieces) and separate them into 2 groups according to their shape:
The "flat" ones will be used on the next step. The "L" shaped won't be used until steps 17 and 24, so set them aside.

12 "Flat", x2

RIGHT

LEFT

The "flat" ones will be
(Front) used on the next step.

(Front)

12 "L" Shaped, x2

RIGHT LEFT

(Front) (Front)

The "L" shaped won't be used until steps 17 and 24, so set them aside.

P.7

RTA-S06

P.7

STEP 5 Hardware:

8 M3x15 Pcs

Assemble the "Flat" sliders 12 to the side panels 14 and 15 with screws C. Please note: · The wheel is at the front, and faces down with 2 holes above it. · The sliders attach at the front on the 2nd hole. · The grooves on the panels are located at the back.

(Back)

(Top)

12
The groove goes at the back of panels

2nd hole from front
(Front) Wheel at front, 2 holes above it

(Back)

(Front)

(Front) (Back)

15 14

STEP 6

· Attach the bolts A to panels 14 and 15 into the indicated holes.

Hardware:

· Check and make sure the cam locks on panel 16 are aligned and

ready to receive the bolts, just as explained in page 4.

4 · Join panels 14 and 15 to panel 16 and turn the cam locks.
M6x40 Pcs

Bolt

THEN:

(Top)

(Back)

FIRST:

(Top)

Cam locks alignment on 16:

(Front)

P.8
STEP 7

RTA-S06

P.8

Slide in the back panel 17 through the grooves of panels 14 and 15 and into the groove of panel 16.

STEP 8

· Attach bolts A to the bottom surface of the top wood panel 18.

Hardware:

· Align cam locks on panels 14 and 15.

· Assemble panel 18 to 14 and 15 as explained in page 4.

M6x40 Pcs

Bolt

(Front)

Cam locks alignment

STEP 9 Hardware:

Assemble the support tubes 21 to the discs on the top glass panel 22 with screws G.

M6x20 Pcs

Headless

P.9

RTA-S06

P.9

STEP 10 Hardware:

Assemble the support tubes 21 to the top wood panel 18 with screws H from underneath.

M6x35 Pcs

(Front) 21 18

STEP 11 Hardware:

4 M3x15 Pcs

Attach the metal fitting 23B to the drawers right panels 2 and 8 respectively with screws C. NOTE: The "U" on the fitting must face DOWN.

(Top) 2

(Front)

The "U" on 23B must face DOWN

23B

(Top)
8

(Front)

23B

P.10

RTA-S06

P.10

STEP 12 Hardware:

4 M6x40 Pcs

Bolt

For the top drawer, assemble side panels 1 and 2 to the front panel 4 with bolts A.

2
1
Cam locks alignment

STEP 13
Slide one of the bottom panels 5 through the grooves of the side panels and into the front panel as shown.
5
2 1

STEP 14 Hardware:

4 M4x35 Pcs

Assemble the back panel 6 to the side panels 1 and 2 with screws B.
6

STEP 15 Hardware:

2 M4x20 Pcs

Assemble one of the handles 13 to front panel 4 with screws D.

2 1

STEP 16 Hardware:

2 M3x15 Pcs

· Assemble the lock 23D to the interior face of the front panel 4 with screws C, making sure the keys will make the rod rotate from the bottom to the top in a counter-clock motion.
· Attach the ring 23G to the lock at the front. NOTE: If the lock is installed turning the wrong way, the rod might get stuck with the drawer locked, unable to open it.

INCORRECT: It might get the rod stuck and drawer might
not open.
CORRECT: Bottom to top
in counterclock motion.

23G 4 23D

P.11

RTA-S06

P.11

STEP 17 Hardware:

4 M3x15 Pcs

Flip the drawer upside-down and assemble the "L" sliders 12 with screws C, making sure the wheel goes towards the back, and that they don't protrude, otherwise, the drawer raises 1" and won't fit in the cabinet.

When finished, the sliders

look like this:

(Top)

(Front)

12
(Bottom)
1
(Top)

Sliders

(Bottom)

If you install as below,

the drawer raises 1"

and won't fit in the unit.

Sliders

RAISES 1" !!!

(Back)

STEP 18 Hardware:

2 M4x14 Pcs

M6x12

1 Pc

· For the bottom drawer, assemble the L bracket 19 to the front panel 9 with screws E and F.
· Assemble the front wheel 20 to the bracket 19 with the nut 19.

(Bottom)

(Top)

19 (Bottom)

(Top)

STEP 19 Hardware:

Assemble side panels 7 and 8 to the front panel 9 with bolts A.

4 M6x40 Pcs

Bolt

Cam locks
8 alignment
7

(Bottom)

(Top)
9

P.12

RTA-S06

P.12

STEP 20

Slide the bottom panel 5

through the grooves of the side panels and

into the front panel as shown.

8 7

STEP 22

Insert the file tubes 11

through the corresponding hole on panel

10 and screw into panel 9, but DO NOT

OVERTIGHTEN to avoid accidental

damage humps or perforation.

Holes to use for LETTER files
9 (U.S.):

STEP 21 Hardware:

4 M4x35 Pcs

Assemble the back panel 10 to the side panels 7 and 8 with screws B.

10
(Bottom)

(Top)

8 7

STEP 23 Hardware:

2 M4x20 Pcs

Assemble the handle 13 to front panel 9 with screws D.

10 11

Holes to use for A4 files (Intl):

STEP 24 Hardware:

4 M3x15 Pcs

When finished, the sliders

look like this:
(Top)

(Bottom)

12 Sliders

(Bottom)

If you install as below,

the drawer raises 1"

and won't fit in the unit.
8

(Top)

Sliders

RAISES 1" !!!

P.13

RTA-S06

P.13

STEP 25
· Insert the drawers into the cabinet, starting with the bottom then the top. Insert at an angle with their fronts facing down, making sure the wheels from the drawer slide in the middle of the sliders inside the cabinet. If the top drawer does not enter, review the assembly done in steps 5, 17 and 24.
· Test the lock on the top drawer: make sure the bottom drawer is completely closed and the rod on the lock is facing DOWN; the key must turn COUNTER-CLOCKWISE. If the key turns clockwise, or the drawers don't lock, review the assembly done in steps 2, 3, 11 and 16 .

TROUBLESHOOTING THE LOCK SYSTEM Please note that for the drawers will lock only if they are closed flushed. If the unit does not lock, review the assembly done in steps 2, 3, 5, 11,16, 17 and 24 for the correct assembly of the locking system and the drawer sliders. If the keys are lost but the cabinet is unlock, replace them with a new set of lock and keys. If the cabinet is locked, and the keys are lost or don't want to turn, email Support for assistance and instructions for solving this problem.
Inside the drawer, the rod on the lock must face DOWN, and the Key must
turn counter-clockwise

P.14
22 Lbs (10 Kg)

RTA-S06
WEIGHT LIMITS
22 Lbs (10 Kg)

P.14

22 Lbs (10 Kg)

WARNINGS
· Do not exceed the indicated weight limits. · Do not expose the surfaces to direct sunlight or to extreme environmental conditions. · Do not use solvents or abrasive materials to clean the unit. · Do not sit on the unit or lean against it. · Do not allow small children to climb over the unit. · Do not allow small children to reach inside the drawers without your supervision. · Before moving the unit, unlock the front casters and secure or remove any object that might fall
off while the unit is rolling. · Please note that lifting the unit from the glass top might lead to part damage/separation. · The glass is made of safety tempered glass. The safety feature is that when breakage occurs,
the glass shatters into many tiny pieces minimizing the risk of serious injuries. If the glass breaks, do not handle the pieces with your bare hands, take some pictures and contact Support. · The warranty does not extend to regular wear and tear, nor the manufacturer assumes liability for damages or consequences due to accidents, incorrect assembly, negligence, improper use, modifications, or not heeding the above warnings.
CARE AND MAINTENANCE
· Clean the surfaces preferable with a clean cloth damped in a solution of mild soap and water, then dry with a clean towel.
· If you decide to use a cleaning agent, test first on an area hidden from view such as underneath the tabletop.
· Every 4 months, inspect the unit completely and make sure that all screws are tighten. · Do not use if you notice cracks on the glass top. · When transporting the unit to places far away, protect and secure the unit to avoid damage
in transit.

P.15

RTA-S06
TECHNI MOBILI WARRANTY

P.15

DESKS/LAPTOP CARTS/FILE CABINETS: LIMITED 5-YEAR WARRANTY
RTA Products, LLC warrants to the Original Purchaser who acquired a new product from RTA P. roducts or its authorized resellers that this product will be free from defects in its workmanship and materials, under normal use and service conditions, as described herein. "Defects" as used in this warranty, is defined as any imperfections that impair the use of the furniture or product. RTA Products LLC will replace any defective part, at its discretion, and without charge to the original purchaser other than the freight from the end consumer to RTA Products.
Replacement parts can only be supplied if parts are available. Items out of production may be unavailable. This warranty will be effective for the applicable time period beginning the date of purchase on your original sales receipt. RTA product's obligation under this warranty is limited to repairing or replacing products or parts as provided herein. This product has been designed for and is intended for office and home-office use only. This warranty is Original Purchaser's sole remedy for product defects, and this warranty does not extend to any product, or damage to any product, caused by or attributed to abuse or misuse, products used for commercial or rental purposes, use modifications of, or attachments to the product, and products or parts not used, maintained, or extended hereunder is in lieu of any and all other warranties, express or implied, including without limitations any implied warranty or merchantability or of fitness for a particular purpose. Please note, all desks made with PVC Laminate surface should not be exposed to direct sunlight, as it may damage the material. Damage of this nature is not covered under this warranty.
RTA Products will not be responsible for indirect, special, incidental or consequential damages. This warranty is limited to merchandise purchased in the Continental United States, excludes AK, HI and PR. Some States do not allow the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights. You may also have other rights that may vary from state to state.
To file a Claim within the 48 contiguous United States: Email us to warranty@rtaproducts.com to explain the defect and provide your name, address, phone number, model number of our product, date and place, and proof of purchase. Please provide pictures of the damage or defect.If we determine that a replacement will remedy the situation, and in order to determine the extent or the cause of the defect, purchaser may be requested to send the part in question at purchaser's expense. Once we receive the part, we will examine it and determine whether the claim is valid (or not), and then proceed to send the replacement. We will ship the replacement at our expense.
Replacement Parts for International Customers & AK-HI-PR orders: RTA Products will replace the part free of charge, while the customer is responsible for shipping costs plus any International local taxes or duties.

Inkscape 1.0.2-2 (https://inkscape.org) cairo 1.17.4 (https://cairographics.org)