Instruction Manual for New Classic models including: 315527 Gemini King Platform Bed, 315527, Gemini King Platform Bed, King Platform Bed, Platform Bed, Bed
Gemini Grey King Platform Bed | Living Spaces
Gemini Dark Brown King Platform Bed | Living Spaces
ASSEMBLY INSTRUCTIONS B1563-100 GEMINI 6/6 EK PANEL BED-HB/FB/RAILS Thank you for purchasing this quality product. Be sure to check all packing materials carefully for small parts, which may have come loose inside the carton during shipment. Identify and count all items and compare with the parts list and/or hardware list shown. PARTS LIST HARDWARE LIST No ITEM Qty No ITEM Qty A Headboard B Footboard C Headboard Leg LSF D Headboard Leg RSF E Bed Roll-Out Slats F Bed Slats Support G Side Rail Left 1 pc 1 pc 1 pc 1 pc 2 sets 8 pcs 2 pcs 1 JCBC M6 x 30mm 12 pcs 2 JCBC M6 x 50mm 8 pcs Flat Washer 1/4"ID x 3 19mmOD Blk 12 pcs ALLEN KEY m4x65mm Blk 4 (FOR HB LEG) 1 pc H Side Rail Right I Center Slat J Side Rail Leg 2 pcs 2 pcs 2 pcs ALLEN KEY m5x65mm Blk 5 (FOR SIDE RAIL) 1 pc Flat Head Chipboard 6 Screw m4x32mm Rbw 32 pcs STEP 1.1 : Attach Head Board Leg ( C,D ) to Head Board ( A ) as shown using Flat washer (3)and securing with ALLEN KEY ( 4 ) . STEP 1.2 : Fix the other holes with Csk Screw (6) as shown. JCBC BOLT( 1 ) with A C LEFT RIGHT D BACK VIEW C 4x STEP 1.1 : 4 1 C 3 STEP 1.2 : 6 8x 1 OF 2 NOTE : MUST TIGHTEN SCREWS PERIODCALLY WITH USE SCREW WILL BECOME LOOSE CHECK TIGHTNESS OF ALL SCREW EVERY 6-8 WEEKS. STEP 2.1 : Attach Side Rail ( G ) & ( H ) to the Side Rail Leg ( J ) as shown using JCBC BOLT( 1 )with Flat washer (3)and securing with ALLEN KEY ( 4 ) by outside side rail (G) & (H) . STEP 2.2 : Loosen JCBB Bolt at Headboard & Footboard Leg using Allen Key (5) (Do not tighten them before Hook SET-UPSIDE RAIL TO HEAD BOARD (A) closely and push down to fit and tighten them accordingly. Repeat step 2.2 with other end of rail to hook onto FOOTBOARD (B). 4 STEP 2.2 : x8 1 STEP 2.1 : G 3 J LOOSEN 5 H TIGHTEN 5 A Left Sticker H JG GH Right Sticker L ALIGN BEFORE TIGHTEN R J FRONT VIEW J SIDE VIEW DO NOT FULLY TIGHTEN SCREW B IN THIS STEP BEFORE ALIGN THE SIDE RAIL AS SHOWN. H G STEP 3 : Fix the Bed Slat Support (F ), to Bed Slat (E) and Center slats (I) tighten with JCBC Bolt (2) as shown . Install the bed slat ( E ) to side rail ( G ) & ( H ) and tighten with Csk Screw ( 6 ) as per diagram shown. (NOTE: THE SETUP MUST DONE AT THE DECIDED LOCATION FOR THE BED TO OBTAIN PERFECT STABILITY) Repeat step 3 for other set of slats assembly. I E E STEP 3.4 : I F B 4 2 STEP 3.1 : Push the side rail(G)&(H) meet with wooden slat(E) and fix the CSK Screw(6) by using the Screw Driver. STEP 3.2 : 6 G STEP 3.5 : 6 E H STEP 3.3 : F REMARK: Push Slat (E) to the end of side rail and secure with CSK Screw(6) as shown. Leveler 2 OF 2 NOTE : MUST TIGHTEN SCREWS PERIODCALLY WITH USE SCREW WILL BECOME LOOSE CHECK TIGHTNESS OF ALL SCREW EVERY 6-8 WEEKS.Adobe Illustrator 26.3 (Windows) Adobe PDF library 16.07