User Guide for SUN GLOW models including: SG Connector App, SG Connector, App
Select Instructions - Sun Glow
SG Connector Firmware Update Instructions 1 CHECK FOR FIRMWARE UPDATES Before starting the update, plug-in your SG Connector unit, ensure that the unit is in close range with the wifi router. Each SG Connector should be updated individually. Ensure that you login with an account with sufficient administrative privileges. OPEN THE "" MENU & OPEN THE LOCATION SELECT "LOCATION" SETTINGS OPEN THE BRIDGE SETTINGS OPEN THE FIRMWARE SECTION 2 INITIATE THE UPDATE If updates are available for your SG Connector, you will see the New Firmware version number and a button to begin the update process. SELECT UPDATE ALLOW THE UPDATE TO COMPLETE WAIT FOR CONFIRMATION REPEAT STEP 1 TO CONFIRM 3 UPDATE COMPLETE The firmware update is complete. It is no longer required for the myLink unit to be at close range to the router and can be positioned freely. 1 of 2 SG Connecteur Comment mettre à jour le firmware 1 VÉRIFIER LES MISES À JOUR DU FIRMWARE Avant de commencer la mise à jour, branchez votre unité SG Connecteur, assurez-vous que l'unité est à proximité du routeur wifi. Chaque SG Connecteur doit être mis à jour individuellement. Assurez-vous de vous connecter avec un compte disposant de privilèges administratifs suffisants. OUVREZ LE MENU "" ET SÉLECTIONNEZ "LOCATION" OUVRIR LES PARAMÈTRES DE LA LOCATION OUVREZ LES PARAMÈTRES POUR LE "BRIDGE" OUVREZ LA SECTION FIRMWARE 2 COMMENCER LA MISE À JOUR Si des mises à jour sont disponibles pour votre sg connecteur, vous verrez le numéro de la nouvelle version du firmware et un bouton pour commencer le processus de mise à jour. SÉLECTIONNER LA MISE À JOUR ATTENDEZ LA FIN DE LA MISE À JOUR ATTENDEZ LA CONFIRMATION RÉPÉTEZ L'ÉTAPE 1 POUR CONFIRMER 3 LA MISE À JOUR EST COMPLÈTE La mise à jour est complete. Il n'est plus nécessaire que le connecteur SG soit à proximité du routeur et il peut être positionné librement. 2 of 2Adobe PDF Library 15.0 Adobe InDesign CC 14.0 (Windows)