User Guide for easee models including: Equalizer, Small and Light Sensor Device, Equalizer Small and Light Sensor Device, Light Sensor Device, Sensor Device
2 days ago — Installer and User guide ... guide in the product packaging or at easee.com/manuals before using the product. Optimal performance.
Manuals - Easee International
File Info : application/pdf, 10 Pages, 76.14KB
DocumentDocumentEN Installer and User guide Easee Equalizer Introduction The information in this leaflet applies to Easee Equalizer P1 (E02-EQP) and Easee Equalizer HAN (E02-EQ), unless specified otherwise. Read the Important product information guide in the product packaging or at easee.com/manuals before using the product. Optimal performance The Equalizer makes it possible to charge smarter, safer and faster if the installation is scaled accordingly. To enable its true potential, the rated value of the chargers circuit fuse should be as high as possible compared to the main fuse. 2 Product overview Magnetic backside Touch button LED Equalizer Cable x 1 x 1 Wall mounting kit For non-metallic surfaces 3 Technical specifications General Dimensions Product Dimensions Product Packaging Permitted temperature Weight IP degree Supply Cabling Cable length Custom made cable It can be extended using an extension cable 110 x 110 x 27.5 mm (H x W x D) 130 x 130 x 39 mm (H x W x D) -20 °C to +50 °C 95 g (Equalizer P1) 110 g (Equalizer HAN) IP40 5-30 V DC 100 mA (Equalizer P1) 20-32 V DC 30 mA (Equalizer HAN) 1.5 m RJ12 to RJ12 (Equalizer P1) RJ12 to RJ45 (Equalizer HAN) up to 15 m (Equalizer P1) up to 200 m (Equalizer HAN) RJ12 (6 pins) RJ45 (8 pins) 4 Max transmitted power Radio WiFi 25 mW at 863870 MHz. 50 mW at 2.42.472 GHz. Connectivity Easee Link RFTM and WiFi1 HAN (NVE/AMS) (Equalizer HAN) or P1 (Equalizer P1) smart meter communication Modbus connection to energy meter2 Monitor power consumption with the Easee App RFID / NFC reader 1 WiFi is required for normal operation and for future software updates. Installations with multiple master chargers need to be connected to the same WiFi for load balancing to work. Easee Link RF (TM) via radio may be limited by walls, concrete or other obstacles. 2 Only for supported meters. 5 Installation Customer setup Follow these steps if you are a private customer installing the Equalizer in your own household. 1 HAN port Activation In Scandinavia, the communication port on the smart meter is most likely not activated. Contact your utility company to open the HAN port for use with the Equalizer. If you are not in Scandinavia, skip to step 2. 2 Easee App Download Scan the QR code to download the Easee App and create a free account. 3 Equalizer Setup Add the Equalizer in the app, follow the on-screen installation guide and get ready to balance your energy smarter than ever before! 12345 kWh HAN / P1 Smart meter easee.com/app 6 Add product Installation Installer setup Follow these steps if you are an installer and use the Installer App to configure the Equalizer in large commercial installations or private households. 1 Installer App Download Scan the QR code to download the Installer App and create a free account. 2 Equalizer Setup Add the Equalizer to a new or existing charging site using the Installer App and follow the on-screen installation guide to set it up. 3 Smart meter Connect Connect the Equalizer to the smart meter using the provided cable. The Equalizer will appear in the Easee Portal after a while. easee.com/installer-app 7 12345 kWh HAN / P1 Smart meter LED colours meaning White, fast flashing Booting White, breathing every 10s Normal operation Red / white, switching No WiFi added3 Red, flashing No data from power meter4 Red, breathing every 10s Error5 Purple, breathing every 10s Offline operation6 Hold the Easee logo for 3 seconds 3'' to check connectivity. You will see 2 flashes: 1st flash Easee Link RF status7 2nd flash WiFi status Green Connected Red Not connected Touch the Easee logo in the middle to check power consumption: Blue, fast flashing High power consumption Blue, slow flashing Low power consumption Count the flashes for percentage 1 flash (10%), 2 flashes (20%), up to 10 flashes (100%) 3 Use the Easee App to set up the WiFi. 4 Contact your utility company to activate the HAN port. 5 Go to http://easee.support. 6 Check your internet connection. 7After booting, it can take a few minutes before Easee Link RFTM status flashes green. 8 Practical details Warranty The device is free from material defects and is in accordance with laws and regulations for consumer protection in the country where the product is purchased. All correctly installed Easee hardware is covered by our 3 years* limited warranty. *Some countries may have extended warranty. Returns and complaints Contact your distributor or Easee Customer Support at easee.support regarding the return and complaint of your product. 9 The information in this document is for information purposes only, is provided as is, and may be subject to change without notice. Easee AS including its subsidiaries does not accept any liability for the correctness or completeness of the information and illustrations, and is not liable or responsible for your considerations, assessments, decisions or absence of such, or other use of the information in this document. No part of this publication may be re-published, reproduced, transmitted or re-used in any other form, by any means or in any form, for your own or any third-party's use, unless otherwise agreed with Easee or its subsidiaries in writing. Any permitted use shall always be done in accordance with good practice and ensure that no harm may be caused to Easee or by misleading the consumer. Easee and Easee products, product names, trademarks and slogans, whether registered or not, are Easee's intellectual property and may not be used without Easee's prior written permission. All other products and services mentioned may be trademarks or service marks of their respective owners. January 2023 Version 1.00 © 2023 by Easee AS. All rights reserved. Easee AS Grenseveien 19 4313 Sandnes, Norway .easee.com 10