User Manual for DynaScan models including: DS491LT5 Professional Screen, DS491LT5, Professional Screen, Screen
Profesionalni ekran DynaScan DS491LT5
Professional display DynaScan DS491LT5
DS491LT5
USER MANUAL
64907 | V2.10
Contents
Material Contents Declaration ................................................................................................................ 1 Recycling and Energy Information ......................................................................................................... 1 Declaration of Conformity ....................................................................................................................... 2 Déclaration de conformité....................................................................................................................... 3 Safety Precautions ................................................................................................................................. 4 Précautions relatives à la sécurité .......................................................................................................... 5 Important Safety Information .................................................................................................................. 6 Informations importantes relatives à la sécurité ..................................................................................... 7 Getting Started ....................................................................................................................................... 8
Contents ............................................................................................................................................. 8 Installing and Replacing Remote Control Batteries............................................................................ 8 Bien débuter ........................................................................................................................................... 9 Contenu .............................................................................................................................................. 9 Mise en place et remplacement des piles de la télécommande......................................................... 9 Installation............................................................................................................................................. 10 Mounting ........................................................................................................................................... 10 Wall Mounting ................................................................................................................................... 13 Connecting to a Power Source......................................................................................................... 13 Connecting an External Video Source ............................................................................................. 14 Input / Output Terminals ................................................................................................................... 15 Operating Instructions .......................................................................................................................... 16 Powering On/Off the Display ............................................................................................................ 16 Using the Remote Control ................................................................................................................ 17 Using the built-in keypad .................................................................................................................. 19 Navigating the On Screen Display (OSD) Menu .................................................................................. 20 Specifications ....................................................................................................................................... 25 Input Mode............................................................................................................................................ 26 Pin Assignments ................................................................................................................................... 27 RS-232 Input .................................................................................................................................... 27 Troubleshooting .................................................................................................................................... 28 About DSM365 ..................................................................................................................................... 29
0
Material Contents Declaration
Hazardous Substances
Part Name
Lead
Mercury
Cadmium
Hexavalent Chromium
Polybrominated Biphenyls
Polybromodiphenyl Ethers
Pb
Hg
Cd
Cr6+
PBB
PBDE
PCBA
O
O
O
O
O
O
CHASSIS
O
O
O
O
O
O
ACCESSORY O
O
O
O
O
O
PACKAGE
O
O
O
O
O
O
"O" indicates that the level of the specified chemical substance is less than the threshold level
specified in the standards of SJ/T-11363-2006 and EU 2005/618/EC.
"" indicates that the level of the specified chemical substance exceeds the threshold level specified
in the standards of SJ/T-11363-2006 and EU 2005/618/EC.
Recycling and Energy Information
DynaScan is firmly committed to its environmental protection efforts and we believe that reducing our products' impact on the environment is of the utmost importance. We are dedicated to meet the latest environmental protection regulations.
Energy usage
Mode Normal Standby
Energy Consumption Max. 250 W < 1 W
Disposal Do not dispose of electrical appliances as unsorted municipal waste, use separate collection facilities. Contact your local government for information regarding the collection systems available. If electrical appliances are disposed of in landfills or dumps, hazardous substances can leak into the groundwater and get into the food chain, damaging your health and well-being. When replacing old appliances with new one, the retailer is legally obligated to take back your old appliances for disposal at least for free of charge.
DS491LT5 User Manual 1
Declaration of Conformity
FCC This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.
CAUTION: Any changes or modifications not expressly approved by the grantee of this device could void the user's authority to operate the equipment.
RF exposure warning This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provide with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.
Manufacturer Name
DynaScan Technology Corp.
Manufacturer Address 6F, No. 88 Wenmao Rd., Guishan Dist, Taoyuan City 333001,Taiwan
This device complies with Directive 2014/53/EU issued by the Commission of the European Community.
Article 3.1(a) EN 62368-1 :2014+A11 :2017 IEC 62368-1 :2014 (Second Edition)
Article 3.2 EN 300 328 V2.2.2 (2019-07) EN 62311 :2008
Article 3.1 EN 55032 :2015+A11 :2020,Class A EN IEC 61000-3-2 :2019 EN 61000-3-3 :2013+A1 :2019 EN 55035 :2017 EN 301 489-1 V2.2.3 EN 301 489-17 V3.2.4
- Frequency bands and Powers a. WIFI 2.4G-2412~2462MHz. b. Maximum radio-frequency power transmitted in the 2.4GHz is 50mW.
DS491LT5 User Manual 2
Déclaration de conformité
FCC Cet appareil est conforme à la section 15 de la réglementation FCC. Son utilisation est sujette aux deux conditions suivantes : (1) cet appareil ne doit pas causer d'interférence nuisible, et (2) cet appareil doit accepter toute interférence reçue, y compris celles qui peuvent causer un fonctionnement non souhaité.
DÉ CLARATION DE LA COMMISSION FÉ DÉ RALE DES COMMUNICATIONS Cet équipement a été testé et déclaré conforme aux limites d'un appareil numérique de classe A, conformément à la partie 15 des règles FCC. Ces limites sont conçues pour fournir une protection raisonnable contre les interférences nuisibles lorsque l'équipement est utilisé dans un environnement commercial. Ce l'équipement génère, utilise et peut émettre de l'énergie radiofréquence et, s'il n'est pas installé et utilisé conformément au manuel d'instructions, peut provoquer des interférences nuisibles aux communications radio. Le fonctionnement de cet équipement dans une zone résidentielle est susceptible de provoquer des interférences nuisibles, auquel cas l'utilisateur devra corriger les interférences à ses propres frais.
ATTENTION : Tout changement ou modification, non expressément approuvé par le responsable de la conformité, peut révoquer l'autorité de l'utilisateur à employer l'appareil en question.
Avertissement relatif aux expositions RF Cet appareil doit être installé et utilisé en accord avec les instructions fournies et les antennes utilisées pour cet émetteur doivent être installées de façon à fournir une distance de séparation d'au moins 20 cm par rapport à toute personne, et elles ne doivent pas être co-localisées ni opérées en conjonction avec d'autres antennes ou émetteurs. Les utilisateurs finaux et les installateurs doivent recevoir les instructions d'installation des antennes et les conditions d'utilisation de l'émetteur pour satisfaire à la conformité aux expositions RF.
Nom du fabricant Adresse du fabricant
DynaScan Technology Corp. 6F, No. 88 Wenmao Rd., Guishan Dist, Taoyuan City 333001,Taiwan
Cet appareil est conforme à la directive 2014/53/UE émise par la Commission de la Communauté européenne.
L'article 3.1(a) EN 62368-1 :2014+A11 :2017 IEC 62368-1 :2014 (Second Edition)
L'article 3.2 EN 300 328 V2.2.2 (2019-07) EN 62311 :2008
L'article 3.1 EN 55032 :2015+A11 :2020,Class A EN IEC 61000-3-2 :2019 EN 61000-3-3 :2013+A1 :2019 EN 55035 :2017 EN 301 489-1 V2.2.3 EN 301 489-17 V3.2.4
- Bandes de fréquences et puissances a. WIFI 2,4G-2412~2462MHz. b. La puissance radiofréquence maximale transmise dans la bande 2,4 GHz est de 50 mW
DS491LT5 User Manual 3
Safety Precautions
CAUTION
Do not install near flammable material or any heat sources. Do not defeat the safety purpose of the grounding-type plug. Do not disassemble the display to avoid electrical shock or burn. Normal operating condition considers installation at an altitude below 2000m; some abnormalities may be experienced when installed at an altitude above 2000m.
WARNING
Please power off the LCD and the video source before plugging in the DP or HDMI cable. Please installed the display in well-ventilated place, do not install in a confined space. Suitable for mounting on concrete or other non-combustible surface only. If it gives off smoke, strange smell, or unusual noise, or when it gets too hot to touch, immediately unplug the display and contact the dealer. Clean only with soft, dry cloth but not use chemical liquids, and unplug while cleaning. Do not use extreme force or any sharp or pointed objects to touch the display. Do not drop or allow any object to fall to the display. Do not operate the display with wet hands to avoid electric shock. Do not discard this product with general household waste. Please be sure to comply with the local waste regulations. This device uses, generates and radiated radio frequency energy. The radio frequency energy produced by this device is well below the maximum exposure allows by Federal Communications Commission (FCC). When a stationary or fixed image is displayed on the screen for a long time, the image may be permanently imprinted on the screen. This phenomenon is known as image burn-in and is not covered by the manufacturer's warranty. In order to avoid burn-in, avoid prolonged display of static or fixed images on the screen. Power supply cord must not be attached to the building surface, nor run through walls, ceilings, floors and similar openings in the building structure. Power cord shall be connected to a socket-outlet with earthing connection.
DS491LT5 User Manual 4
Précautions relatives à la sécurité
PRÉ CAUTIONS
N'installez pas installer à proximité de matériaux inflammables ou de sources de chaleur. Ne pas compromettre la sécurité de la fiche de mise à la terre. Pour éviter tout choc électrique ou la brûlure, ne démontez pas l'écran. Le produit peut normalement être utilisé à une altitude inférieure à 2000 m. Des anomalies peuvent survenir lors de l'installation de l'appareil à une altitude supérieure à 2000 m.
AVERTISSEMENT
Veuillez éteindre l'écran LCD et la source vidéo avant de brancher le câble DP ou HDMI. Veuillez installer l'écran dans un endroit bien ventilé, pas dans un espace confiné. Convient pour le montage sur du béton ou autre surface non combustible uniquement. S'il dégage de la fumée, une odeur étrange ou un bruit inhabituel, ou s'il est trop chaud au toucher, débranchez immédiatement l'écran et contactez le revendeur. Nettoyez uniquement avec un chiffon doux et sec, sans utiliser de produits chimiques, et débranchez-le pendant le nettoyage. N'exercez pas une force excessive et n'utilisez pas d'objets tranchants ou pointus pour toucher l'écran. Ne laissez pas tomber l'écran et ne laissez aucun objet tomber dessus. Afin d'éviter tout choc électrique, n'utilisez pas l'écran avec les mains mouillées. Ne jetez pas ce produit avec les déchets ménagers. Assurez-vous de respecter les réglementations locales en matière de déchets. Cet appareil utilise, génère et rayonne de l'énergie radiofréquence. L'énergie de radiofréquence produite par cet appareil est bien inférieure à l'exposition maximale autorisée par la FCC (Federal Communications Commission). Lorsqu'une image immobile ou fixe est affichée sur l'écran pendant une longue période, l'image peut être imprimée de manière permanente sur l'écran. Ce phénomène est connu sous le nom d'image rémanente et n'est pas couvert par la garantie du fabricant. Afin d'éviter toute détérioration, évitez l'affichage prolongé d'images statiques ou fixes sur l'écran. Le cordon d'alimentation ne doit pas être connecté à la surface du bâtiment, ni traverser les murs, les plafonds, les planchers et les ouvertures similaires du bâtiment. Le cordon d'alimentation doit être connecté à une prise électrique mise à la terre
DS491LT5 User Manual 5
Important Safety Information
Disassembling the LCD is strictly prohibited. Opening the cover may expose the user to electric shock or other hazards. Please contact DynaScan certified service professionals for all maintenance requirements.
Do not allow any liquid to enter the LCD. Also avoid placing the LCD close to water sources. Do not place heavy objects on the power cord. A damaged power cord might cause electric
shock or fire. Do not bend, twist, or damage the power cord. The power cord must comply with the local safety regulations. Do not damage or modify the prongs/pins and the ground contact on the power cord plug. Do not place the LCD on an unleveled surface or an unstable vehicle. The LCD could fall over
and cause substantial damage. Do not cover the vents and/or the heat sink. Do not install the LCD beside radiators or other heat sources. The installation site should have
sufficient ventilation so the heat generated by the LCD can be dissipated. Do not use the Signage in a hot, humid, dusty, or fumy environment. Handle the LCD with care. Save the packaging materials for transport later. Clean the LCD backside at least once a month for dust and other particles.
Unplug the LCD immediately and contact a DynaScan certified service professional as soon as possible when any of the following situations occurs: Damaged power cord or power plug. If liquid or foreign object has entered the LCD. If the LCD has been exposed to rain or water. If the LCD has been dropped or the casing has become damaged. If any structural damage such as cracks or unnatural vibration is found. If the LCD cannot be operated following the steps outlined in this manual. If the LCD emits smoke or other odors, or generates strange noises.
Operating Suggestions Avoid displaying a stationary image for a long period of time in order to prevent image sticking.
Cleaning the Panel Use a soft, lint-free cloth to gently wipe the dust off from the screen panel. Do not use any hard material to wipe the panel. Do not poke the panel with your hand or any sharp object (such as a pen or a nail) or exert
excessive pressure on the panel to prevent any damage. Do not use any cleaning solutions on the panel as it might cause discoloration.
Cleaning the Casing Unplug the power cord. Gently wipe the casing with a soft cloth.
Attention Do not use any of the following solutions to clean the casing as they may damage the paint and
cause it to crack or peel: benzene solution, alkaline solution, alcohol-based cleaning solution, glass cleaner, wax, polisher, or detergent.
DS491LT5 User Manual 6
Informations importantes relatives à la sécurité
Le démontage de l'écran LCD est strictement interdit. L'ouverture du capot peut exposer l'utilisateur à un choc électrique ou à d'autres dangers. Veuillez contacter des professionnels de service certifiés DynaScan pour tous les besoins de maintenance.
Ne laissez aucun liquide pénétrer dans l'écran LCD. Évitez également de placer l'écran LCD à proximité de sources d'eau.
Ne placez aucun objet lourd sur le cordon d'alimentation. Un cordon d'alimentation endommagé peut provoquer un choc électrique ou un incendie.
Ne pliez pas, ne tordez pas et n'endommagez pas le cordon d'alimentation. Le cordon d'alimentation doit être conforme aux réglementations locales de sécurité. Veillez à ne pas endommager ni modifier les broches ou le contact de terre sur la fiche du cordon
d'alimentation. Ne placez pas l'écran LCD sur une surface qui n'est pas de niveau ou sur un véhicule instable.
L'écran LCD pourrait tomber et causer des dégâts importants. Ne couvrez pas les orifices de ventilation et / ou le dissipateur de chaleur. N'installez pas l'écran LCD à côté de radiateurs ou d'autres sources de chaleur. Le site
d'installation doit disposer d'une ventilation suffisante pour que la chaleur générée par l'écran LCD puisse être dissipée. N'utilisez pas l'affichage signalétique dans un environnement chaud, humide, poussiéreux ou enfumé. Manipulez l'écran LCD avec soin. Conservez les matériaux d'emballage pour tout transport ultérieur. Nettoyez l'arrière de l'écran LCD au moins une fois par mois afin d'éliminer la poussière et autres particules.
Débranchez immédiatement l'écran LCD et contactez un réparateur professionnel certifié DynaScan dès que possible lorsque l'une des situations suivantes se produit : Cordon d'alimentation ou fiche d'alimentation endommagé. Si du liquide ou un corps étranger est entré dans l'écran LCD. Si l'écran LCD a été exposé à la pluie ou à l'eau. Si l'écran LCD est tombé ou si le boîtier a été endommagé. Si vous constatez des dommages structurels comme des fissures ou des vibrations non
naturelles. Si l'écran LCD ne peut pas être utilisé en suivant les étapes décrites dans le présent manuel. Si l'écran LCD émet de la fumée ou d'autres odeurs, ou génère des bruits étranges.
Suggestions d'utilisation É vitez d'afficher une image immobile pendant une période prolongée afin d'éviter que la
rémanence d'image.
Nettoyage du panneau Utilisez un chiffon doux non pelucheux pour essuyer délicatement la poussière du panneau de
l'écran. N'utilisez aucun matériau dur pour essuyer le panneau. Afin d'éviter tout dommage, n'appuyez pas sur le panneau avec votre main ou un objet pointu
(comme un stylo ou un ongle) et n'exercez pas de pression excessive sur le panneau. N'utilisez aucune solution de nettoyage sur le panneau car cela pourrait provoquer une
décoloration.
«Danger de stabilité» ou libellé équivalent; «Le moniteur peut tomber, entraînant des blessures graves ou mortelles» ou texte équivalent; Le texte suivant ou équivalent: Pour éviter les blessures, ce moniteur doit être solidement fixé au sol / mur conformément aux instructions d'installation.
DS491LT5 User Manual 7
Getting Started
Contents
Confirm that the accessories below are shipped along with the display. If any item is missing, please contact your dealer. The color and shape of the accessories may vary with the products.
DS491LT5 Professional LCD. Remote Control x 1 pc. Batteries (1.5V / AAA) x2 pcs.
Power cable x1 pc. Quick Start Guide x1 pc. ESK302 x1 pc.
Attention: Please use the following table to check whether the included power cord is suitable for your region. If the power cord does not match your region, please contact your local supplier. Please use matching AC socket in order to meet your local safety regulations.
Plug Type North America
European Continental
Japan
Taiwan
Plug Shape
Region
Voltage NEMA TYPE
U.S.A. / Canada 120V
NEMA 5-15
IEC Display Plug
EU (Except U.K.)
230V
CEE 7/7
Japan 100V NEMA 1-15
Taiwan 110V NEMA 5-15
IEC Plug TYPE
IEC320 C13
Installing and Replacing Remote Control Batteries
1. Open the battery compartment cover. 2. Insert 2 new AAA batteries. 3. Close the battery compartment cover.
Warning: Incorrect usage of batteries may cause leakage or explosion. Pay attention to the polarity when installing the batteries. Do not mix different types of batteries or new and used batteries. Doing so may shorten the
battery life or cause leakage. Remove or replace the batteries when they are empty in order to prevent acid leaking in the
battery compartment. Do not touch the leaked substance from the batteries in case of a battery leakage. Doing so
may hurt human skin.
Note: If the remote control is not going to be used for a long time, we recommend removing the batteries from the remote control.
DS491LT5 User Manual 8
Bien débuter
Contenu
Vérifiez que les accessoires ci-dessous sont fournis avec l'écran. Si l'un d'eux est manquant, veuillez contacter immédiatement votre revendeur. La couleur et la forme des accessoires peuvent varier selon les produits.
É cran LCD DS491LT5 Professional. Télécommande x 1 Piles (1,5V / AAA) x 2
Câble d'alimentation x 1 Guide de démarrage rapide x 1 ESK302 x 1
Attention : Veuillez utiliser le tableau suivant afin de vérifier que le cordon d'alimentation fourni est adapté à votre région. Si le cordon d'alimentation ne correspond pas à votre région, veuillez contacter votre fournisseur local. Veuillez utiliser la prise secteur correspondante afin de respecter les réglementations locales de sécurité.
Type de fiche
Amérique du Nord
Europe continentale
Japon
Taïwan
Forme de la fiche
Région
Tension TYPE NEMA
Fiche d'affichage
CEI
TYPE fiche CEI
É tats-Unis / Canada 120V
NEMA 5-15
UE (Hors R.-U.)
230V
CEE 7/7
Japon 100V NEMA 1-15
IEC320 C13
Taïwan 110V NEMA 5-15
Mise en place et remplacement des piles de la télécommande
1. Ouvrez le couvercle du logement à piles. 2. Insérez 2 nouvelles piles AAA. 3. Fermez le couvercle du logement à piles.
Avertissement : Une mauvaise utilisation des piles peut provoquer des fuites ou une explosion. Faites attention à la polarité lors de l'installation des piles. Ne mélangez pas différents types de piles ou des piles neuves et usagées. Cela pourrait
raccourcir la durée de vie des piles ou causer des fuites. Retirez ou remplacez les piles lorsqu'elles sont vides afin d'éviter toute fuite d'acide dans le
logement à piles. Ne touchez pas la substance qui s'écoule des piles en cas de fuite. Cela pourrait blesser la
peau.
Remarque : Si la télécommande ne doit pas être utilisée pendant une période prolongée, nous vous recommandons d'en retirer les piles.
DS491LT5 User Manual 9
Installation
The LCD must be properly installed using a wall mount. Incorrect installation may cause injury or damage the equipment. Product warranty does not cover the damage caused by improper installation and DynaScan shall not be held responsible in such incident. Refer to the mount manufacturer's instructions for proper installation.
Mounting
We recommend for at least four people to handle and mount the display. Mounting the Professional LCD on the wall is the responsibility of the user. Not all walls provide
enough strength to support the LCD. The LCD may drop and cause serious injury if it is mounted on a slanted wall. Product warranty does not cover improper installation, modification, or damage caused by natural disasters. DynaScan recommends having certified professionals to evaluate the installation site and perform the mounting operation. Do not to cover the vent and/or the heat sink in order to ensure proper heat dissipation. Refer to the installation guide provided by the manufacturer for proper mounting.
When mounting on a wall A wall mount is not included in the accessory. Please purchase a VESA Standard wall mount to
secure the LCD. DynaScan is not responsible for the damage caused by using non-standard wall mounts. Verify that the mounting location can support the weight of the LCD before installation. The installation angle must be within 15 degrees of the vertical axis. Do not install the wall mount while the power is turned on as it may cause serious injury due to electrical shock.
Model Number
VESA (mm)
Screw Specification
Screw Length
Number
Greater than 10mm
DS491LT5
(A * B) 400 * 400
M6
Smaller than 12mm (not including wall
4
mount thickness)
DS491LT5 User Manual 10
Unit: mm
B
A
Orientation When used in the portrait orientation, the LCD should be rotated clockwise when looking at the
front of the display such that the left edge becomes the top edge.
<Front> Portrait mode: Rotate the set clockwise 90° (mandatory) The orientation sticker can be found on the rear of display, which is for distinguishing the direction of installation.
DS491LT5 User Manual 11
Installation Location The wall and mount must have enough strength to support the LCD and its accessories. Do not install in a location with strong vibrations or dusty. Do not install near the building's main electric panel. Ensure the LCD is secured in such a manner that it cannot be easily removed by the general
public. Leave clearance around the outer edge of the LCD (or video wall matrix) from other objects to
ensure proper ventilation.
Single display Maintenance Inspect the fasteners regularly for signs of loosening or deformation. Please perform
appropriate corrective measures when a problem is identified. Neglecting the problem may worsen the situation. Increase the inspection frequency on areas where previous maintenance had occurred to ensure the problems do not occur again.
DS491LT5 User Manual 12
Wall Mounting
A wall mount is not included. Please purchase a VESA Standard wall mount to secure the LCD. DynaScan is not responsible for damages caused by using non-standard wall mounts.
Verify that the mounting location can support the weight of the LCD before installation. The installation angle must be within 15 degrees of the vertical axis. Do not install the wall mount while the power is turned on as it may cause serious injury from
electrical shock.
15
Connecting to a Power Source
Using the power cable provided, plug it in the power inlet on the back of the display shown in the diagram below. Connect the power cable to a 100-240 volt, 50 / 60Hz AC power outlet.
Insert the plug completely into the socket. A loose power connection may cause damage to the display and/or lead to a fire hazard.
DS491LT5 User Manual 13
Connecting an External Video Source
Turn OFF the power of both LCD and external video device. Using the DP cable (or HDMI cable) provided, insert one end into the DP-IN (or HDMI 1-IN, HDMI 2-IN) on the back of the display shown the in the diagram below. Connect the other end of the DP cable (HDMI cable) to the DP output (or HDMI output) of the video source. Refer to your video device's manual for additional information.
DS491LT5 User Manual 14
Input / Output Terminals
A. AC (IN): Connect the supplied power cord to the wall outlet. B. Power Switch: Press to switch the main power on/off. C. RJ-45 1 (IN): RJ45 network input connection. D. RJ-45 2 (IN): RJ45 network input connection. E. RS-232 (IN): RS232C network input connection for remote control from PC. F. HDMI 1 (IN): Connect the HDMI output of a PC or an AV device via a HDMI cable. G. HDMI 2 (IN): Connect the HDMI output of a PC or an AV device via a HDMI cable. H. DP (IN): Connect the DP output of a PC or an AV device via a DP cable. I. USB 3.0 port: Support for USB flash drive storage, mouse and keyboard. J. Extension Connector: Extension Connector for optional IR Extension sensor kit (ESK302). K. Micro SD card: Support for up to 128GB, FAT32 format is supported. L. Thermal: Extension Connector for optional Extension thermal kit (ETK302). M. Audio (OUT): Connect the audio signal output from Audio IN jack to an external AV device.
*USB 3.0 port: A standardized port to connect a variety of devices like mouse, keyboard, and flash drive. Support USB storage devices formatted with NTFS, FAT32 (32G) file system.
A
C E G IK M
B
D F H JL
DS491LT5 User Manual 15
Operating Instructions
Powering On/Off the Display
To turn on/off the display, press the power switch on the back of the display as shown in the diagram below.
NOTE: The remote control only works when the power switch is ON.
ON OFF
DS491LT5 User Manual 16
Using the Remote Control
Connection using an External Sensor Kit (ESK302) Connect the ESK302 cable to the mini USB port on the side of the display, and aim the remote at the IR receiver as shown below. Meanwhile, the IR receiver on the display will be disabled. The operating range of the remote control is 2.5 meters (8 feet).
NOTE: Ambient light may affect the performance of the remote control. Avoid fluorescent or neon lights in the vicinity.
DS491LT5 User Manual 17
ITEM
POWER MENU UP LEFT RIGHT DOWN OK BACK
*Color and shape may vary by model.
DESCRIPTION
Power On / Off OSD On / Off Move the cursor up or change the setting of selected item. Exit the current selection. Select the highlighted item. Move the cursor down or change the setting of selected item. Enter (for DSM365 only) Return to the last page. (for DSM365 only)
DS491LT5 User Manual 18
Using the built-in keypad
ITEM
MENU UP DOWN LEFT RIGHT
DESCRIPTION
OSD On / Off, Power On / Off. Move the cursor up or change the setting of selected item. Move the cursor down or change the setting of selected item. Exit the current selection. Select the highlighted item.
DS491LT5 User Manual 19
Navigating the On Screen Display (OSD) Menu
Press the MENU button on the built-in keypad or remote control to show the OSD. Use the navigation arrows to select and adjust the menu items. *The change of each setting can only enable when you press "LEFT" (refer to p.19) to back to the last menu layer.
1. Input Source
ITEM 1
ITEM 2
Main Failover 1 Failover 2 Failover 3
Input Source Failback
Command Detection
2. Picture
DEFAULT HDMI 1 HDMI 2 DP DSM365
OFF
OFF
DESCRIPTION
Set the Main input to display. Set the Failover 1 input to display. Set the Failover 2 input to display. Set the Failover 3 input to display. Set the time (hour),when the Input Source is failover , it will redetection the Main Source per few hour. Only effective in Main input source. If the display didn't get both of commend and the input signal, it will change to Failover1 input.
ITEM 1 Picture
ITEM 2
Color Temperature
DEFAULT User
DESCRIPTION
Adjusts the color temperature to preset or user determined values. (User, D55, D65,
DS491LT5 User Manual 20
Red
Green
Blue Contrast Gamma
100
100
100 60 Native
Black Level
Limited
3. Brightness
D93, Balanced) Adjust the red light level. Range 0 100. Note: The feature is only supported on User mode. Adjust the green light level. Range 0 100. Note: The feature is only supported on User mode. Adjust the blue light level. Range 0 100. Note: The feature is only supported on User mode. Adjust the contrast level. Range 0 100. Adjusts the Gamma value. (Native, 2.2, 2.4 and sGamma) Selects the black level to adjust the screen gray scale. "Limited" for video source uses 16 to 235 levels for R/G/B, such as HDMI. "RGB Full" for video source uses all levels from 0 to 255 levels. "Auto" is for detecting the video source to determine its value is applicable for "Limited" or "RGB Full".
ITEM 1
ITEM 2
DEFAULT
Brightness
Auto Brightness
Fixed
Backlight Level Local Dimming
100 High
DESCRIPTION
Brightness Setting :Fixed:screen brightness remains at one level. Timer:Screen brightness is determined by the time of day. Auto:Screen brightness is determined by an extension sensor kit (ESK). Mix:Mix Timer & Auto Mode,Autosensor time screen brightness determined by an extension sensor kit (ESK); fixed time by timer. By Light Value:Screen brightness determined by ambient light values, up to 4 levels. By Time:Screen brightness determined by scheduled values, up to 4 levels.
Adjusts the contrast. High is the highest contrast. Low is the lowest contrast.(High, Low, Medium , OFF)
DS491LT5 User Manual 21
4. Time
ITEM 1 Time
ITEM 2
Region Time Zone Set Date & Time
DEFAULT
Current Time
Current Date Day Of Week
5. Schedule
DESCRIPTION
Set the Time Zone. Set the mode. Set the clock. Note: The internal clock will continue to function when the power is turned off. Set the date. Set the day of week. (Monday to Sunday)
ITEM 1 Schedule
ITEM 2
Power ON|OFF Time
DEFAULT OFF
DESCRIPTION Automatic power on / off schedule function.
DS491LT5 User Manual 22
6. Advanced
ITEM 1
ITEM 2 Display Mode
DEFAULT Auto
Screen Protection OFF
IR Control
ON
Power Restore Behavior
Power On
Advanced Auto Out Volume 50
RS232 CMD Compatible
ON
Schedule Reboot
OSD Password Protection
Export & Import Settings
OFF OFF
DESCRIPTION
Change the Menu orientation. The Menu can be displayed in either LANDSCAPE or PORTRAIT mode. Turn on / off image burn-in protection. Set image burn-in protection interval. Range 0 100 minutes. Enable/disable the remote control for Menu. Note: When disabled, the remote control
function can be enabled again from the control panel on the display or through the DynaScan "Display Manager" application. Choose to use the Power Restore Behavior function. Power On: Display booting up when the power back after an outage. Standby: Display keeps soft-off status when the power back after an outage. Memory: Display will back to the last state when the Set volume. Range 100 0. RS232 Command compatibility between the current and last generation* model.
* last generation model: DS371BT4 DS491LT4DS552LT4-1DS552LT4-M DS552LT5DS552LT6-1DS552LT7 DS551DR4DI551ST2DW551LR5 DO552LR4DO551LR4DO552LR4-M DI651ST2DP652ST2DP652LT5
Enable/disable the Schedule Reboot, And set the Time. Turn On: Create Password > Confirm Password > Password Protection On Turn Off: Enter Password > Password Protection Off
Export or Import OSD Setting by USB.
DS491LT5 User Manual 23
Reset Default Settings
7. Information
Restore all settings to default. Note: It does not modify CURRENT TIME, POWER ON TIME and POWER OFF TIME.
ITEM 1
ITEM 2 Resolution
DEFAULT
MCB Version
Information
FW Version OS Version
Thermal Kit Temp.
Some functions may not be available for all models.
DESCRIPTION Input resolution.
The MCB version.
The Firmware version.
The OS version.
The Extension Thermal Kit (ETK302) is for ambient temperature monitoring.
DS491LT5 User Manual 24
Specifications
MODEL PANEL
POWER MECHANICAL SPECS USER INTERFACE ENVIRONMENT
I/O Ports Fuse
LCD Panel Size Native Resolution Brightness Contrast Ratio Response Time Viewing Angle Life Time Panel Surface Power Supply Rated Voltage Power On Mode
Standby Mode
Bezel Width (T/B/L/R) Cabinet Color
Monitor Dimension (LxHxD)
Monitor Weight (set / package) VESA Mounting (Dimension)
OSD Language
Operation Temperature Storage Temperature Humidity HDMI DP RS-232 Audio USB port RJ-45 Micro SD Slot Extension Connector (Mini USB)
DS491LT5
48.5 inches 1920 x 1080 4,000 cd/m² (Typ.) 3,000:1 8 ms (Typ.) 178°/ 178° 100,000 hrs (Typ.) AR, 2H Internal 100 - 240V, 50 / 60Hz 160W (Typ.) / 230W (Max.)
< 1W
8.7/8.7/8.5/8.5 mm Black
1096.7 x 627.2 x 82.3 mm
19.6 kg / 26.5 kg 4 Holes (400x400 mm)
English
0°C ~ 45°C -20°C ~ 60°C 10%~80% RH Non-Condensing IN *2 IN *1 IN *1 OUT *1 IN *1 IN *2 IN *1 IN *1 (ESK only)
5A
Design and specifications are subject to change without notice.
DS491LT5 User Manual 25
Input Mode
H Pixels
640 720 800 960 1024 1280 1280 1280 1280 1366 1400 1440 1600 1680 1920 1920
Active Resolution
V Lines
480 480 600 600 768 720 768 960 1024 768 1050 900 1200 1050 720 1080
Refresh Rate
60 Hz 60 Hz 60 Hz 60 Hz 60 Hz 60 Hz 60 Hz 60 Hz 60 Hz 60 Hz 60 Hz 60 Hz 60 Hz 60 Hz 60 Hz 60 Hz
DS491LT5 User Manual 26
Pin Assignments
RS-232 Input
PIN No.
01 02 03 04 05 06 07 08 09
NAME
Connected to 7&8 TXD RXD Connected to 6 GND Connected to 4 Connected to 1&8 Connected to 1&7 NC
DS491LT5 User Manual 27
Troubleshooting
ISSUE
No image is displayed.
Nothing happens when switching the main switch on. Image is unstable.
The remote control does not work.
Auto on/off does not work or does not function properly. Cannot control the display remotely via RS-232.
RECOMMENDED SOLUTION
Check whether the cable is completely plugged in. Check whether the main switch is in the ON position, and the
power cord is completely plugged in. Check whether the image source's resolution is set as the
supported format (refer to section "Input Mode", p.27). Check whether the cable is damaged or bent excessively. Unplug the power cord from the socket and plug it in again
after a few seconds to reset the Signage. Note: Unplugging the power cord will not change the settings.
Check whether the cable is completely plugged in.
Check whether there are batteries in the remote control. Check the batteries for freshness, polarity, etc. Check whether the remote is in the operation range. Bright light may interfere with the remote control. Please
avoid using the remote control near special fluorescent lights or neon lights. Check whether the TIMER setting in the menu is set to "OFF". Check whether the "Power On Time" and "Power Off Time" settings are set correctly.
Check whether the RS-232 cable is connected properly.
If you are still having trouble with your DynaScan DS² Professional LCD, contact your dealer or DynaScan directly for more assistance.
DS491LT5 User Manual 28
About DSM365
DSM365 is an internal operating system as Android, which can install the applications via USB flash drive storage, SD card or Internet.
How to Switch to DSM365
Press the MENU button on either the rear panel control or remote control to show the OSD. Use the navigation arrows to select and adjust the Input Source.
[Input Source Main DSM365]
ITEM
APPS
DESCRIPTION Show the Installed APPS.
DS491LT5 User Manual 29
www.dynascandisplay.com
Copyright © DynaScan Technology, Inc. All Rights Reserved. DS491LT5 User Manual 30
Microsoft Word 2016 Microsoft Word 2016