User Guide for LDSBus models including: Quad T-Junction, Quad T-Junction Connects LDSBus Devices Sensors, Connects LDSBus Devices Sensors, LDSBus Devices Sensors, Devices Sensors, Sensors

QSG Quad T-Junction

Quick Start Guide

BRT Systems Pte Ltd

QSG LDSBus Quad-T-Junction

Quad T-Junction - IoTPortal

View

Accessories - BRT Systems Pte Ltd


File Info : application/pdf, 1 Pages, 182.56KB

PDF preview unavailable. Download the PDF instead.

QSG Quad-T-Junction
Quad T-Junction
Quick Start Guide

Setup Instructions:
The LDSBus Quad T-Junction connects LDSBus Devices (Sensors / Actuators) to the LDSBus. Each junction can connect up to four LDSBus Devices and additional LDSBus Quad T-Junctions may be daisy chained to add more LDSBus Devices to the LDS Bus.

Step 1: Connect the first LDSBus Quad T-Junction to any of the LDSBus Host Systems using an RJ45 (CAT5e) cable.

Step 2: Connect the configured LDSBus Device(s) to the LDSBus Quad TJunction as shown in the picture.

Step 3: If there is more than one LDSBus Quad T-Junction in the system, chain them together as shown in the picture.

Note: Enable termination for last LDSBus Device in the bus

Please scan QR code A or visit

A

View the full information on the LDSBus Quad T-

B

https://brtsys.com/warranty for warranty registration using

Sticker Area Sticker Area

Junction, application setup and installation at https://brtsys.com/resources/

the UUID and Product Key.

or scan QR Code B.

Quad T-Junction
Quick Start Guide

Setup Instructions:
The LDSBus Quad T-Junction connects LDSBus Devices (Sensors / Actuators) to the LDSBus. Each junction can connect up to four LDSBus Devices and additional LDSBus Quad T-Junctions may be daisy chained to add more LDSBus Devices to the LDS Bus.

Step 1: Connect the first LDSBus Quad T-Junction to any of the LDSBus Host Systems using an RJ45 cable (CAT5e) cable.

Step 2: Connect the configured LDSBus Device(s) to the LDSBus Quad TJunction as shown in the picture

Step 3: If there is more than one LDSBus Quad T-Junction in the system, chain them together as shown in the picture.

Note: Enable termination for last LDSBus Device in the bus

Please scan QR code A or visit

A

View the full information on the LDSBus Quad T-

B

https://brtsys.com/warranty for warranty registration using

Sticker Area

Junction, application setup and installation at https://brtsys.com/resources/

the UUID and Product Key.

or scan QR Code B.



References

Microsoft Word 2016