Instruction Manual for WEEFINE models including: WFH07 Universal Phones Smart Housing, WFH07, Universal Phones Smart Housing, Phones Smart Housing, Smart Housing
The WEEFINE WFH07 Smart Housing, with its rich functions and professional software and hardware design,creates an excellent underwater photography ...
Weefine WFH07 Universal Phones Smart Housing - IPHONE UNDERWATER HOUSINGS - FOTOGRAFIT
File Info : application/pdf, 1 Pages, 8.49MB
DocumentDocumentUniversal Phones Smart Housing (WFH07 Please read the manually carefully before using Product Introduction Thank you for purchasing WEEFINE products! WEEFINE is committed to improving convenience and reliability through innovative design and ease of use that cater to the usage habits of both professional and amateur photographers; Mobile phones are becoming the most commonly used photography devices.The WEEFINE WFH07 Smart Housing, with its rich functions and professional software and hardware design,creates an excellent underwater photography experience for you;All important function operations of each WFH07 is strictly inspected and hydraulically tested to ensure stable and reliable quality. Please read this manual carefully before using the product,as it will maximize its performance and lifespan. Technical Parameters & Housing opening&locking & Place the phone Compatible phones size Within163.5(L) x 82(W) x 106(H) mm + 7mm(Lens) Depth Rating 80m / 262Ft Battery Built-in Lithium Battery Charger TYPE-C input Running time Work running time>24HoursStandby time>100days Open Pull the lock plate safety buckle outward and twist the lock plate towards the Open direction until the back cover is fully opened; Locking Align the lock plate latch with the lock column on the transparent back cover of the housing,twist the lock plate towards the Lock direction until the safety buckle of the lock plate clicks and the housing locks; Times of vacuumizing >100 number of times Material Aluminum with Type II Anodizing and Optical Grade Polycarbonate Resin Dimension 238.5(L) x 119(W) x 76(H) mm Weight 1150g cAir/ 100gcUnderwater 2 1 Place the phone Place the back of the phone facing down and push the phone's clip until the phone is flat and inserted; Note: The top of the phone should not overlap with the rubber protective buckle on the left side of the Smart Housing to avoid damaging the phone when closing it; Product information (Figure 1) 7 8 9 10 11 6 5 4 (Figure 2) 18 14 (Figure 3) 3 2 19 21 22 20 1 12 13 16 15 17 (Figure 1) 1 Lens window 2 Exhaust valve 3 Hand rope hole 4 Lock plate 5 Lock plate safety buckle 6 Wheel 7 Shutter 8 Fiber optic port 9 Exhaust valve latch 10 Exhaust valve safety lock 11 Hot shoe / Traybase (Figure 2) 12 back window 13 Fixed seat 14 Up key 15 Down key 16 Left key 17 Right key 18 Menu (Figure 3) 19 Phone's clip 20 Charging port 21DiveIT APP QR 22 Indicator light Packing List WFH07 *1 Spare Oring *1 USB-C cable *1 User Manual *1 Allen Key *1 Silicon grease *1 Removal tool *1 Shutter extension lever *1 Lanyard *1 Clean cloth *1 Housing on/off & Connecting the phone to the Smart Housing & Button vibration effect Turn on Push and hold the Shutter for 3 seconds Turn off Push and hold the Menu key for 3 seconds Working indicator light status Battery level>20% Battery level<20% Connecting the phone to the Smart Housing Bluetooth Scan the QR code inside the Smart Housing to download the connected Green light goes on Red light goes on DiveIT App and install it for registration; After opening the App and turning on the Smart Housing,the Bluetooth phone and the Smart Housing will be automatically connected; not connected Green light flashing Red light flashing Button vibration effect Push and hold the Right key for 3 seconds to enable or Note: Valve Pump function will disable when battery level <20%; disable it App manually Open and close the exhaust valve Open the valve While pressing the safety lock of the red exhaust valve, pull the exhaust valve latch in the direction of the arrow until the exhaust valve is completely ejected and the valve opens; Close the valve Press the exhaust valve firmly until the latch is marked with a pointing , and the valve is closed with a "click" sound ; Note: Before closing the back cover of the housing, please open the exhaust valve,so as to smoothly close the housing ; Please open the exhaust valve during transportation to maintain the balance of air pressure inside and outside the housing and avoid damaging components; Before diving,the exhaust valve must be closed to avoid water; After diving,it is necessary to blow dry/wipe off the water around the valve before opening it to prevent water droplets from being sucked into the hose; Close the valve Da Exhaust valve latch Exhaust valve safety lock Exhaust valve General Maintenance & Charging and indicator light status 1.Soak the housing in freshwater for minimum 30 minutes after diving 2.If the housing is not going to be used for a long time please store the housing with 70% battery capacity 3.The battery need to be recharged fully every 6 months to prolong the battery life 4.There is an O-ring on the case,silicon grease should be used to keep the O-ring well lubrication.If the O-ring is cracked,hardened,damaged,deformed and so on,it should be replaced in time 5.Do not use sharp tools to remove the O-ring. Indicator light Inserting a Type-C cable into the charging port, and it takes less than 3 hours to fully charge; Red light:charging in progress; Green light:battery fully charged; Charging port