Zebronics Music Bomb X Pro Portable BT Speaker
User Manual
Brand: Zebronics
Website: https://www.zebronics.com
Introduction
Dear Consumer,
Thank you for purchasing the MUSIC BOMB X PRO Portable BT Speaker. Please read the user manual carefully before usage and save it for future reference.
Important Notes:
- ? Avoid the use of this product in high-temperature and high humidity environments.
- ? Avoid self-disassembly of the product, as it will result in voiding your warranty.
- ? Please charge the product with a power adaptor output rated voltage DC 5V.
Features
- BT v5.1
- Supports USB/mSD
- Built-in FM Radio
- TWS Function
- AUX Input
- Call Function
- RGB Lights with 11 Modes
- Media/Volume control
- Built-in Rechargeable battery
- Dual passive radiator
Specifications
Output power (RMS) | 20W (10W + 10W) |
BT Version | 5.1 |
Driver size | 5.7 cm x 2 |
Speaker impedance | 4Ω |
Frequency response | 80Hz-20kHz |
S/N Ratio | ≥80dB |
Max. supported memory size | 32GB (USB/SD) |
Supported Audio formats | MP3 |
Charging time | 5h |
Playback time | 22h* |
BT name | ZEB MUSIC BOMB X PRO |
Product Dimension (W x D x H) | 24 x 12 x 10.4 cm |
Net. weight | 1.1kg |
Package Content
- Subwoofer: 1 U
- Satellite: 4 U
- Remote: 1 U
- Input cable: 1 U
- QR Code Guide: 1 U
Product Details
Top Panel Controls:
- 1. Volume Down / Previous: Short Press: Decrease Volume. Long Press: Previous track (BT/USB/mSD) or Previous Channel (FM).
- 2. Input Mode: Switch Input modes.
- 3. Power Button: Long Press: Power On/Off. Short Press: Play/Pause. Double Press (FM Mode): FM Scanning.
- 4. LED Indicator: [status indicator]
- 5. TWS Button / Call Function: Short Press: Enable/disable TWS Function.
- 6. LED Mode Switch / LED On/Off: Short Press: Switch LED modes. Long Press: LED On/Off.
- 7. Volume Up / Next: Short Press: Increase Volume. Long Press: Next track (BT/USB/mSD) or Next Channel (FM).
Ports:
- 8. AUX IN: [audio input jack]
- 9. Micro SD Slot: [memory card slot]
- 10. USB Port: [USB drive port]
- 11. Type C Charging: [charging port]
Instructions for Use
Charging the Speaker
- Connect the Type-C charging cable to the DC 5V charging port of the speaker and insert the other end into a USB power adaptor with a minimum DC 5V 1A power rating.
- The LED blinks in a row, indicating that the battery is being charged. The LED will glow in a row once it is fully charged.
Note: Once the input source is connected, the modes will automatically be chosen. If you need to access a specific mode while multiple input sources are connected, hold down the Mode button for a few seconds to switch between devices.
BT mode
- Switch the Input mode to BT on your "ZEB MUSIC BOMB X PRO".
- Turn ON BT on your phone / tablet and search for nearby BT devices.
- Search for the BT name "ZEB MUSIC BOMB X PRO" and tap to connect it.
USB/mSD mode
Connect the USB/ mSD card device to the respective ports of "MUSIC BOMB X PRO" and the speaker would automatically start playing from the mSD card/USB device.
AUX mode
Connect the speaker to an audio source (phone, TV, PC) using a 3.5mm cable. Once connected, change the speaker to AUX mode and thereafter audio can be streamed via the speaker from the connected source.
Call Function
BT should be connected with a mobile phone. During a call, short press the "TWS" button to answer/end the call or long press the "TWS" button to reject the call. To re-dial a call, double press the "TWS" button to dial a call.
TWS (True Wireless Stereo) function
When two speakers are in Bluetooth mode, short press button "TWS" on one of the speakers to enter TWS mode. It will search and connect with another speaker automatically. When two speakers are connected successfully, you can control both speakers at the same time.
Note: Requires two Zebronics Music Bomb X Pro for TWS feature.