ROPOX 6153 Support Washbasin Basic Right hand User Manual

User Manual for ROPOX models including: 6153 Support Washbasin Basic Right hand, 6153, Support Washbasin Basic Right hand, Washbasin Basic Right hand, Right hand

Brugermanual Support Vask

AMX

Ropox User & mounting manual - Lateral Adjustment System for Support Washbasin

Support Washbasin Basic - Right hand model | Ropox

SupportLine | Ropox Complete Fixed - Basic - ManualRopox User & mounting manual - Support Washbasin Complete ElectricRopox User & mounting manual Support Washbasin Fixed-Basic-ManualRopox User & mounting manual - Support Washbasin Electric

File Info : application/pdf, 26 Pages, 1.26MB

6153 User Mounting Manual Support Washbasin Lateral adjustment system GB

Ropox Lateral Adjustment System for Support Washbasin
USER MANUAL & MOUNTING INSTRUCTIONS
Always keep this manual with the product
PDF 6153/ 25.05.2022

Contents
PRODUCT INFORMATION............................................................................................................................... 2
PRODUCT INFORMATION ................................................................................................................................... 3 APPLICATION.................................................................................................................................................... 4 DIMENSION SKETCHES ...................................................................................................................................... 5 INSTALLATION INTERFACES ............................................................................................................................... 6 LOCATION OF WATER, DRAIN AND ELECTRIC INSTALLATIONS ................................................................................ 7 MAINTENANCE AND SPARE PARTS.................................................................................................................... 10 CLEANING OF PLASTIC COVER, RELIEF PLATE AND RELEASE HANDLE.................................................................. 10 SPARE PARTS................................................................................................................................................. 10
MOUNTING INSTRUCTIONS ......................................................................................................................... 11
MOUNTING INSTRUCTIONS AND LIST OF COMPONENTS ...................................................................................... 11
USER INFORMATION .................................................................................................................................... 23
FUNCTIONAL TEST .......................................................................................................................................... 23 SAFETY INSTRUCTIONS ................................................................................................................................... 23 SERVICE AND MAINTENANCE ........................................................................................................................... 23 INSPECTION ................................................................................................................................................... 24 FAULT FINDING ............................................................................................................................................... 25 LABEL ............................................................................................................................................................ 25 SYMBOLS: ...................................................................................................................................................... 25 COMPLAINTS .................................................................................................................................................. 26

Always read this manual prior to mounting and use

Side 2

Product Information
Product information
Owing to its unique design, Ropox Lateral Adjustment for Support Washbasin offers improved utilisation of the bathroom. The washbasin is laterally adjustable and may be pulled away from the toilet thus providing increased space for wheelchair users and walking impaired persons. The simple adjustment system offers frequent adjustment of the washbasin to suit different users and helpers. The lateral adjustment range is 350mm.

Technical data
Product name:
Item number:

Ropox Lateral Adjustment System for Support Washbasin 40-44030

Range of adjustment: Materials:
Surface treatment:

35cm / 13 ¾"

Rail:

St. 37

Various plastic parts

Cover:

Vacuum-shaped ABS

Powder-coating, RAL 9010 mat white, Chromite

Max. load:

Load-tested and safe up to and including 400 kg/881lbs. According to DS/EN 12182 the maximum user weight has been fixed at 200 kg/440lbs.

Own weight:

20 lbs

Application temperature: 10 - 40 °C / 50 104°F

Manufacturer:

Ropox A/S DK-4700 Næstved, Tel.: +45 55 75 05 00 E-mail: info@ropox.dk

This product has CE-marking, which proves that the Lateral Adjustment System has been manufactured according to the relevant requirements of DS/EN 12182: 2012 and The Medical Devices Directive No.93/42/EEC and belongs to the lowest risk class 1.

This product is UKCA-marked in accordance with:
UK SI 2002 No. 618 The medical Devices Regulations 2002, and its amendments
UK SI 2008 No. 1597 The supply of Machinery (Safety) Regulations 2008, and its amendments

Side 3

Product Information
Application
Ropox Lateral Adjustment for Support Washbasin is an accessory for the following models of Ropox Support Washbasin:
40-44014 Manual, left 40-44015 Manual, right 40-44016 Electrical, left 40-44017 Electrical, right
For lateral adjustment of the washbasin, proceed as follows:
Pull the release handle to release the lock. The washbasin may now be pulled sideways. Let go of the release handle in the required position and pull at the washbasin until the handle locks into place.
Ropox Lateral Adjustment for Support Washbasin is adjusted stepwise from 0 to 13 ¾".
See Fig. 1 (The Lateral Adjustment is shown for the right version of the Support Washbasin).

Side 4

Product Information

Dimension sketches
See Figs. 2 and 2.1

Washbasin pushed in:

39 5/6"

2 1/6"

Washbasin pushed out:

4 2/3" 13 1/6"
1 19/20" 53 1/6"

24 9/10"

Side 5

Product Information
Installation interfaces
Construction
The wall must be made of a material suited for screw mounting and approved for damp rooms. The lateral adjustment system has been load-tested and is safe up to 400 kg/881lbs. According to DS/EN 12182, the maximum user weight amounts to 200 kg/441lbs. Max. load of upper screws: 41kg/screw ( 90lbs/screw).
Electrics
Recommended location of socket in wall for optimum and hidden wiring. In case of an alternative solution, the cable from the control unit is 3.2m. See Fig. 3.
Plumbing
The drain has a diameter of Ø32 (11/4")and is provided with an Ø32x88.5° elbow. Max. protrusion of drain connection and elbow from the wall is 50mm/1 19/20" owing to the covers.
The water supply ends in 2 (two) 90° shut-off valves with ½" outside thread. Location and optimum orientation as illustrated. Max. protrusion of shut-off valves from the wall is 50mm owing to the covers.
It is recommended to install water and drain connections as illustrated. All hoses for water and drain connections must be flexible for the unit to move freely within the range of adjustment.

Side 6

Product Information
Location of water, drain and electric installations
Manual/electrical height adjustment, plumbing located behind the cover. See Fig. 3

Manual: Electric:

27 15/16" 39 M¾a"nual: 27 15/16" 37 E4/l5e"ctric:

27 15/16" 39 ¾" 27 15/16" 37 4/5"

0 24/25"

1 19/20"

18 5/7"

3 9/10" 1 19/20"

20 7/10"

2 ¾"

9 15/32"

All hoses for water connection and drain must be flexible for the washbasin to move freely within the range of adjustment.

Manual/Electrical height adjustment, plumbing visible beside the washbasin. See Fig. 4 (plumbing may be located on either side of the washbasin).

0 24/25"

1 19/20"

45 1/21"

5 7/8" 2 15/16"

20 7/10"

2 ¾"

8 5/8"

All hoses for water connection and drain must be flexible for the washbasin to move freely within the range of adjustment.

Side 7

Product Information

Connection adapters and recommended plumbing accessories
The components listed below may be purchased as accessories depending on the type of installation in the building.

Plumbing accessories for Manual/Electrical Support Washbasin with hidden/visible

installation

Manual Support Washbasin

Electrical Support Washbasin

Hidden installation (See Fig. 3)

40-44031 (to be purchased separately)

97001161 (to be purchased separately)

Visible installation (See Fig. 4)

40-44032 (to be purchased separately)

97001168 + 97001122 (to be purchased separately)

Water connection adapters
Hoses from washbasin
1/2"

Hose extensions
Hose from washbasin

Coupling piece

1/2" -> 1/2" Item No. 97001662

Adapter

Installation in room (not provided)

No adapter required

1/2" thread

1/2" -> 3/8" Item No. 97001670

3/8" thread

1/2" -> 15mm Item No. 97001666

15mm pipe

Extra hose

1/2" x 1/2", 0,5m, steel Item No. 97001123

1/2" x 1/2", 1m, plastic Item No. 97001120

Side 8

Product Information

Drain adapters
Drain hose from washbasin
Ø32

Drain extensions
Drain hose from washbasin

Sleeve

Adapter

Installation in room (not provided)

Ø32 No adapter required

Ø40 Ø32 -> Ø40 Item No. 97001660
Ø50 Ø32 -> Ø50 Item No. 97001661

Extra drain hose

Ø32

Ø32-Ø32 Item No. 97001662

Ø32 flex hose, 27-62cm Item No. 97001162
Ø32 flex hose , 40-110cm Item No. 97001161

Ø32 flex hose, 52-150cm Item No. 97001168

Components in grey boxes are optional extras.

Side 9

Product Information

Maintenance and spare parts
The product may get dirty during use. Follow the cleaning procedure for this product. Spare parts are listed in the diagram below.
Cleaning of plastic cover, relief plate and release handle
The lateral adjustment system is made of plastic and aluminium with a surface finish facilitating cleaning. When required, wash the surfaces with water and dry with a cloth. Do not use detergents containing abrasives, e.g. steel wool, scouring powder or sulphur acid. The system is maintenance-free.
For disinfection, use an ordinary disinfectant.

Spare parts
Item number
Plastic cover Item No. 40-44030-064

Designation

Release handle complete set
Item No. 40-44030-065
Relief plate Item No. 40-44030-036

Side 10

Mounting Instructions
Mounting instructions and list of components
These mounting instructions only apply to Lateral Adjustment for Ropox Support Washbasin.
Note: Mounting of screws in the wall must always be made considering the strength and condition of the specific wall. The screws provided are intended as a guide for mounting on a concrete wall considering the max. screw loads stated in the mounting instructions.
The mounting instructions described below apply to mounting of the lateral adjustment system for a right-hand Support Washbasin. The dimensions are the same for a left-hand washbasin.
Before mounting, check that all parts stated in the list of components have been provided.

List of components
Ropox Lateral Adjustment System: Wall rail incl. release handle

1 (one)

Slide carriage Relief plate Plastic cover Mounting parts

2 (two) 1 (one)

1 (one)

Side 11

1 (one) bag

Mounting Instructions
Marking on wall
1. Determine location of centre holes as illustrated. 2. Drill centre holes in the wall and mount rail and relief plate. 3. Make sure that they are flush. 4. Mark the remaining holes in the wall. 5. Drill remaining holes.

20 ¾"

Wall rail

20 ¾"

25 19/32"

Relief plate

7 21/32"

The marking shown has been made so as to avoid jamming between the washbasin and
the adjoining wall. The minimum distance of 527mm / 20 ¾" is decisive for avoiding the risk of jamming.

Side 12

Mounting Instructions
Fasten the rail on the wall
Level the rail by first mounting the centre screw

9x 7,5x72mm Screw

Side 13

Mounting Instructions
Mount the relief plate on the wall

Level the relief plate by first mounting the centre screw. Mount caps when all screws have been tightened.
Chipboard screw

Caps Torx Ø12

Side 14

Mounting Instructions
Mount the plastic cover in the screw holes of the wall rail
Fasten the plastic cover and press the caps onto the screws.

Caps set Side 15

Mounting Instructions
Mount the slide carriages on the legs of the washbasin

Mount the washbasin on the lateral adjustment system

Side 16

Side 17

Mounting Instructions
Place release handle and wire as illustrated
Loosen the shaft and push it a little backward to allow for the wire to pass
Place the wire behind the frame ensuring free movement

Side 18

Mounting Instructions
Fasten the release handle with nut under the table

Fasten the wire with strips through the hole on the back of the frame.

Washbasin viewed from below with wire fastened with strips.

Side 19

Mounting Instructions
When mounting of water and wastepipe insert connection hoses into cable binders. Divide cable binders into 2 making them approx. same length and mount with enclosed tools.
After mounting of cable binders the hoses and wastepipe can be connected. Make sure hoses are above drain/wastepipe, as shown in picture beneath.

Cable binder mounted on water hose
Hoses to be pulled over and above drain/wastepipe

Side 20

Mounting Instructions
Mounting of the lateral adjustment system has now been completed and the product is almost ready for use. Now mount drain and water connection. The picture below shows the hidden connection with the drain behind and under the washbasin.
Hidden installation
Drain hidden behind and located under the washbasin

The picture below shows the visible connection with the drain on the side and under the washbasin.

Visible installation

Drain visible beside and located under the washbasin

NOTE: Visible installations require a special plumbing kit. See page 35. Side 21

Mounting Instructions
For uneven walls use a distance plate to be inserted between the slide carriage of the lateral adjustment system and the legs of the washbasin, as illustrated in Fig.19.

Side 22

User Information
Functional test
After completed installation and before use, all functions of the Ropox Lateral Adjustment System with Support Washbasin must be tested. After that, a functional test must be carried out at least once a year by competent personnel.
1. Check that the mounting instructions have been observed. 2. Check that all screws and bolts have been securely tightened. 3. Check that drain and hoses have been correctly connected. 4. Check that there is no load on the frame. 5. Check that there are no objects preventing the frame from moving freely within the
height and lateral adjustment range.
After successful functional test, the Ropox Lateral Adjustment for Support Washbasin is ready for use. See "Safety instructions".
Safety instructions
The Lateral Adjustment System should only be operated by persons, who have read and understood these instructions.
For some models of Ropox Lateral Adjustment the Support Washbasin is heightadjustable and should not be used as a lifting table or person lifter.
Always use the product in a manner excluding the risk of damage to persons or property. The person operating the unit is responsible for avoiding damage or injury.
When using the system in publicly accessible environments where children or persons with reduced observation capability may get near the washbasin, the person operating the washbasin must be very careful in order to avoid dangerous situations.
Make sure that there is free space above, below and beside the washbasin for lateral and height adjustment.
Do not overload the lateral adjustment system and make sure that the load distribution is correct.
Do not operate the system in case of errors or damage. Modifications, which may influence the operation or construction of the lateral
adjustment system for Support Washbasin are not allowed. Installation, service and repairs should only be carried out by competent personnel. During inspections, service or repairs, load must be removed from the unit
Service and maintenance The product may get dirty during use. It is very important to clean the system according to these instructions. Wash with a wrung cloth with lukewarm water and an ordinary cleaning agent. Do not use etching/grinding liquids or grinding cloths, brushes or sponges.

Side 23

User Information
Inspection
Note: When fastening screws in the wall, always consider the strength and condition of the specific wall. The screws provided are intended as a guide for fastening on a reinforced wall considering the max. screw loads stated in the mounting instructions.
Ropox Lateral Adjustment is maintenance-free. Moving parts have been lubricated for life. However, for reasons of safety and liability we recommend an annual inspection.
Check that all screws and bolts have been securely tightened, the system moves freely from side to side without problems, the release handle locks in place in the notches of the rail.
After each inspection, complete the service schedule. See "Service Schedule".
Only use Ropox original replacement parts. If other spare parts are used, the guarantee may become void.

Service schedule

Service and maintenance Serial No. Date: Signature: Comments:

Side 24

User information
Fault finding
a) The lateral adjustment system is unstable 1. The screws fastening the system to the wall have not been securely tightened. 2. Tighten all screws, cf. mounting instructions. b) The washbasin cannot be adjusted laterally / adjustment is difficult 1. Check that there are no objects preventing the adjustment. 2. Check that the release handle works.
Label
Each unit has a label of its own as illustrated. This label contains important information to be stated in connection with inquiries to the supplier. For location of the label, see the spare parts drawing.

Symbols:
The user manual must be read before use.
Waste must be sorted if possible, for recycling. Ropox is the manufacturer of the product in question.
CE-marking. This product meets the requirements for General Safety and Functionality of the relevant EU Directive and Standards.

Side 25

User information
Complaints
See General Terms of Sale and Delivery on www.ropox.dk

ROPOX A/S
Ringstedgade 221 DK 4700 Næstved Tel.: +45 55 75 05 00 Fax.: +45 55 75 05 50 E-mail: info@ropox.dk
www.ropox.dk

Side 26

References

Microsoft Word til Microsoft 365