User Manual for AVAPOW models including: A07 Multi-Function Car Jump Starter, A07, Multi-Function Car Jump Starter, Car Jump Starter, Jump Starter, Starter
A17 User Manual (PDF) AVAPOW AVAPOW AVAPOW,Car,Jump,Starter,2000A,Peak,16800mAh,Jump,Boxes,for,Vehicles(12V,8L,Gas/6.5L,Diesel,Engine),Equipped,Fast,Wireless,Charging,Jump,Starter,Battery,Pack,B09YR16T4S,B08T6KPF2F,B08T637RW9,B08T5V2BGD
AVAPOW Car Jump Starter 2000A Peak Jump Boxes for Vehicles(12V 8L Gas/6.5L Diesel Engine) Equipped Fast Wireless Charging Jump Starter Battery Pack : Automotive
Amazon.com: AVAPOW Car Jump Starter 2000A Peak Jump Boxes for Vehicles(12V 8L Gas/6.5L Diesel Engine) Equipped Fast Wireless Charging Jump Starter Battery Pack : Automotive
File Info : application/pdf, 10 Pages, 869.12KB
DocumentDocumentAVAPOW Multi-function car jump starter -User Manual- Model: A07 EN Friendly Tips: Please read carefully the instruction manual so that you can be familiar with the product more conveniently and quickly!Please use product correctly based on the instruction manual. Perhaps there is small difference between the picture and the actual product,so please turn to the actual product for detail information. 01 What's in the box AVAPOW jump starter x1 Intelligent battery clamps with starter cable x1 High quality type-C charging cable x1 User-friendly manual x1 Specifications Model number Capacity EC5 output USB output Type-C input Charging time LED light power Working temperature Dimension (LxWxH A07 47.36Wh 12V/1500A maximum starting power(max.) 5V/3A, 9V/2A, 12V/1.5A 5V/2A, 9V/2A 2.5-4 hours White: 1W -20 ~+60 / -4 ~+140 180*92*48.5mm 03 Product diagrams 1 Power button 2 Output: 5V/3A, 9V/2A, 12V/1.5A 3 Type-C input: 5V/2A, 9V/2A 4 LED display 5 EC5 jump start output 6 LED light 4 7 Light button 3 2 1 Accessories 5 6 7 Intelligent battery clamps with starter cable High quality type-C charging cable 04 Charge the Jump Starter battery Charging with an AC adapter (Note:AC adapter is not included). 1.Connect the battery input with Type-C cable. 2.Connect the Type-C cable to AC adapter. 3.Plug the AC adapter into a power source. Type-C cable AC adapter Input LED Display Press the power button,the LED display shows as follows: 100 Show available battery 05 How to Jump Start Your Vehicle This unit is designed for jump starting 12V car batteries only and rated for gasoline engines up to 7 liters and diesel engines up to 4 liters.Do not attempt to jump start vehicles with a higher battery rating, or different voltage.If the vehicle isn't started immediately, please wait for 1 minute to allow device to cool down. Do not try to restart the vehicle after three consecutive attempts as this may damage the unit. Check your vehicle for other possible reasons why it can't be restarted. Operating instructions First step: Press the power button to turn on it,check the battery shown on the LED display,then plug jumper cable into battery pack outlet. Second step: Connect the jumper clamp to car battery,red clamp to positive,black clamp to negative pole of car battery. Third step: Turn on the car engine to start car. Fourth step: Pull the plug of battery terminal from jump starter and remove clamps from auto battery. 06 Jumper Clamp Indicator Instruction Item Input low voltage protection Input high voltage protection Technical parameters 13.0V±0.3V Instruction The red light is always on, the green light is off, and the buzzer does not sound. 18.0V±0.5V The red light is always on, the green light is off, and the buzzer does not sound. Work instruction Support When working normally,the green light is always on, the red light is off, and the buzzer beeps once. Reverse connection protection Support The red/black clip of the wire clip is reversely connected to the car battery (battery voltage 0.8V), the red light is always on, the green light is off, and the buzzer sounds at short intervals. Short circuit protection Support When the red and black clips are short-circuited, no sparks, no damage, the red light is always on, the green light is off, the buzzer 1 long and 2 short beeps. Start timeout protection 90S±10% The red light is always on, the green light is always on, and the buzzer does not sound. Connect to the high voltage alarm Automatic anti-virtual electricity function Support Support The clip is mistakenly connected to battery that is >16V, the red light is always on, the green light is off, and the buzzer sounds slowly and shortly. When the car battery voltage is higher than the Starter battery voltage, the output is automatically turned off and the green light is on,at this time, it can be ignited normally. If the car battery voltage drops and is lower than the starter battery voltage during the ignition process, the smart clip will automatically turn on the output to complete the startup process. 07 How to charge a mobile phone or digital products? With powerful capacity and USB Quick Charger(5V/3A,9V/2A,12V/1.5A),it can full charge your smart phones and tablets up to 75% faster than a standard charger. Operating instruction First step: Press the power button,then check the battery shown on the LED display Second step: Plug the USB port of the charging cable into the product USB Third step: Inset the other side into the input port of the mobile phone 08 LED flashlight sos Short press the Light Button to turn on the flashlight.The battery capacity indicator lights up.Short press the light button again to scroll through the lighting,Strobe,SOS.Short press again to turn off the flashlight.The flashlight offers more than 35 hours of continuous use when fully charged. LED Flashlight Light Button Press the Light Button shortly Press the Light Button shortly Press the Light Button shortly Press the Light Button shortly Lighting Strobe light SOS off 09 Safety Warning 1. Never short circuit the jump starter by connecting the Red and Black clamps. 2. Do not disassemble the jump starter. 3. If you find swelling,leakage or odor,please stop using the jump starter immediately. 4. Please use this starter at normal temperature and keep away from humid,hot and fire places. 5. Do not start the vehicle continuously.There should be at least 30 seconds to 1 minute between two starts. 6. When the battery power is less than 10%,do not use the jump starter otherwise the device will be damaged. 7. Before first use please charge it for 3 hours or more. 8. If the positive clamp of the starting power was incorrectly connected to the negative poles of the car battery,the product comes with relevant protective measures to avoid personal injury and property damage. Note: - For the first use, please make sure to fully charge before use. - In normal use, please confirm that the unit has at least 50% power before use. Warranty Exemption 1. The product has been incorrectly operated or damaged due to the following irresistible reasons (such as flood,fire,earthquake, lightning,etc). 2. The product has been repaired,disassembled or modified by non-manufacturer or non-manufacturer authorized technicians. 3. The problem caused by wrong charger does not match the product. 4. Beyond the product warranty period(24-month). 10