User Manual for GET Trakka models including: GT-SENKIT-BUK-920, GT-SENKIT-BUK-920 Reference Sensor, Reference Sensor, Sensor
CR Mining 07-0024-915-A 2A9FA-07-0024-915-A 2A9FA070024915A 07 0024 915 a
USER MANUAL January 2023 GT-SENKIT-BUK-920 REFERENCE SENSOR The reference sensor is a long-life version of the consumable sensor tag. Designed for years of maintenance free continuous use in mining environments it is installed directly onto production machinery such as Digger Buckets, Truck Trays, and Engines etc. for continuous monitoring of assets in extreme mining conditions. The reference sensor is wirelessly transmitting data to the receiver via RF transmissions and is activated/deactivated using the portable reader. Operating Bandwidth Channels GT-SENKIT-BUK-920 920 925 MHz 4 Selectable Channel Spacing 1 MHz RFID Type Active Transmitter / Receiver / Transceiver Transceiver Transmission Power 10 mW (Max) - Fixed Transmission Time 1.5 ms Transmission Frequency / Period 1.0 Hz / 1s Duty Cycle 0.15 % Battery Type Lithium Thionyl Chloride Nominal Voltage 3.6 V Nominal Capacity 19 Ah (10 years active tag lif e) Product Operating Temperature -10 to +90 °C Dimensions 118 mm W x 118mm H x 98mm D Weight 900g Accessories NA This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required. Warning: Any changes or modifications not expressively approved by the grantee could void the user's authority to operate this equipme nt. This equipment complies with the FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and all persons during normal operation. For assistance, email support@crdigital.com or call (+61) 1300 33 8482PDFium PDFium